Nederlands | English | Deutsch

Project Sports

Questions and answers about sports

What type of chain lube is best for winter riding?

6 min read

Asked by: Israel Davis

Which is better dry or wet lube for bike chain?

Dry lubes are for the driest conditions and cleanest chains. Wet lubes can be used all year, offer better value and have the greatest longevity. Whether wet or dry, it’s often a question of how much time and effort you want to put in. Either way, make sure you use a lubricant — your chain will thank you for it!

What is the best lubricant for bicycle chains?

Best bike chain lubes

  • Squirt chain lube. …
  • Purple Harry’s Purple Extreme. …
  • Fenwicks Wet Weather. …
  • Muc-Off Hydrodynamic. …
  • Finish Line Wet. …
  • Morgan Blue Syn Lube Course. …
  • Rock ‘N’ Roll Gold. Impressively fast running and super clean membrane lube. …
  • Smoove chain lube. Very durable high-performance wax lube for extended clean efficiency.

How do I maintain my bike chain for the winter?

Once a week, thoroughly clean your chain with a chain solvent such as Simple Green and a chain scrubber, available at most bike shops for $10 – $15. If you don’t have or don’t want a chain scrubber, an old toothbrush will do. If you don’t have or don’t want chain solvent, warm water and any degreasing dishsoap will do.

Is dry chain lube better?

As a lower viscosity lubricant, dry lubes promise greater efficiency through lower friction and by attracting fewer contaminants. The downside of dry lubes is they are often very easily washed off by rain or puddles.

Should you put WD-40 on a bike chain?

Can I use WD-40 to lube my bicycle chain? No. You should never use WD40 as chain lubricant since WD-40 is NOT a true lubricant. WD40 is primarily a solvent or rust dissolver.

Can you use WD-40 on a bike chain?

WD-40 is a great bike chain lube water based lubricant and will not only lubricate the chain well, but will also keep it rust and corrosion free.

Is WD-40 dry lube good for bike chain?

WD40 Bike Dry Lube goes on easily, works well to keep chains running smoothly without caking them in dust and grit, and can even withstand the occasional puddle or shower.

Is silicone spray good for bike chains?

Yes. It is not optimal for use on chains though. It washes away rather easily leaving your chain unprotected and un-lubricated. It would work in a pinch but a light oil or something specifically made for the application will work much better and last a lot longer.

Can I use 3 in 1 oil on my bike chain?

I don’t recommend using either motor oil or 3in1 oil to lubricate the chain. Motor oil is too heavy and won’t fully penetrate the rollers, and 3in1 oil is vegetable based and will gum up the chain.

How do I prepare my bike for winter?

Storing Your Bike

  1. Clean the frame and components–Thoroughly wash your bike with a cleaner.
  2. Check your tires–Bike tires have a manufacturer-recommended storage pressure. …
  3. Lubricate components–After washing, allow your bike and components to dry, then apply lubricant.

How often should you wash your bike in the winter?

Basic tips for care and maintenance of your bike in snowy, salty conditions. The more you clean your bike, the easier and quicker the job will be. Every week or two, clean the chain, gears, cranks and wheel rims to remove built-up grease and grime.

How often should I clean my bike in winter?

CLEAN TWICE AS OFTEN



Remove all your winter seal coverings and give the bike a thorough wash. Then wax the frame with car wax to protect paint and make cleaning easier after your next ride. Chain rule: If you clean your chain once a month during the rest of the year, clean it at least once a week during winter riding.

How often should you degrease your bike chain?

‘ You should clean your bike chain at least once a month if you cycle regularly on perfect roads or after every 100-200 miles of cycling. You should do it more often, however, probably after every use, if you ride on sandy, muddy, dirt, or salty surfaces and after a hard, long ride.

Can you use olive oil on bike chain?

Can I use olive oil on my bicycle chain? You can use olive oil on your bicycle chain because having oil in some amounts is better than having no oil at all. However, this can be effective only for a short time. If you are thinking big, using olive oil on your bike’s chain isn’t effective.

When should I lubricate my bike chain?


Quote from video: Похожие запросы

When should I use dry lube on my bike chain?

Dry lubes are best used in dry environmental conditions since it’s thin and waxy, which prevents dust, sand, and dirt from sticking to the chain. If you do most of your riding in sunny summertime conditions, and avoid trail riding during inclement weather, then dry lube is ideal.

Can I use dry lube on bike chain?

The short answer: probably. For mountain bikers and other off-road cyclists, it’s a great choice. Riding in dusty, gritty conditions is why it was created in the first place, and it can handle slightly wet conditions. Most cyclists would benefit from using dry bike chain lube as their go-to, according to Krause.

How often should you dry lube a bike chain?

If you are a regular bike commuter you should lube your bike chain at least every month or every 150-200 miles (240-320 kms). Depending on the conditions you ride your bike in and the type of chain lube you use, this period can vary from a few days to a month.

Does dry chain lube prevent rust?

Lubricate the Chain



Lubricant acts as a barrier between the bike’s chain and the exterior elements (including moisture). Therefore, you should get into the habit of applying a high-grade lubricant to your chain regularly. As long as there’s a layer of lubricant over the chain, it shouldn’t rust.

Is silicone spray good for bike chains?

Yes. It is not optimal for use on chains though. It washes away rather easily leaving your chain unprotected and un-lubricated. It would work in a pinch but a light oil or something specifically made for the application will work much better and last a lot longer.

Can I use 3 in 1 oil on my bike chain?

I don’t recommend using either motor oil or 3in1 oil to lubricate the chain. Motor oil is too heavy and won’t fully penetrate the rollers, and 3in1 oil is vegetable based and will gum up the chain.