What size bolt is 8mm?
3 min read
Asked by: Gerardo Bullets
The defined diameter of metric bolts is actually slightly larger than the actual diameter of the bolt shaft. So an M8 bolt would have a shaft diameter that’s slightly under 8mm which means that the bolt should fit through an 8mm hole.
Is 5/16 The same as M8?
To sum up: M8 and 5/16 are different bolts. M8 and 5/16 are not compatible. It is not recommended to use a M8 bolt into a 5/16 thread (and vice-versa), otherwise you run the risk of forcing and damaging the thread.
What size is an M8 bolt in MM?
Dimensions for DIN931 Hex Head Bolt
| Diameter (d) | Pitch | Across Flats (s) |
|---|---|---|
| M5 | 0.8mm | 8mm |
| M6 | 1.0mm | 10mm |
| M7 | 1.0mm | 11mm |
| M8 | 1.25mm | 13mm |
What size is an M8 bolt in inches?
Table 3.
| Metric | Closest Inch |
|---|---|
| M8-1.25 | 5/16-18 (Smaller) |
| M10-1.5 | 3/8-16 (Smaller) |
| M12-1.75 | 1/2-13 (Larger) |
| M14-2.0 | 9/16-12 (Larger) |
What size wrench fits a 8mm bolt?
Metric Bolt Head/Wrench Size
| Bolt Diameter (mm) | Head/Wrench Size (mm) | |
|---|---|---|
| ANSI/ISO | DIN | |
| 7 | – | 11 |
| 8 | 13 | 13 |
| 10 | 16 | 17 |
Is an M8 bolt 8mm?
The defined diameter of metric bolts is actually slightly larger than the actual diameter of the bolt shaft. So an M8 bolt would have a shaft diameter that’s slightly under 8mm which means that the bolt should fit through an 8mm hole.
What size is a #8 bolt?
American Screw Sizes
| THREAD DIAMETER | ||
|---|---|---|
| Size | Nearest Fraction | Millimeter |
| #5 | 1/8 | 3.1 |
| #6 | 9/64 | 3.3 |
| #8 | 5/32 | 4.2 |
What socket is M8 bolt?
FLAT HEAD SOCKET CAP SCREW – METRIC
| Size | Head Diameter | Hexagon Socket Size |
|---|---|---|
| M4-0.7 | 8.96 | 2.50 |
| M5-0.8 | 11.20 | 3.00 |
| M6-1.0 | 13.44 | 4.00 |
| M8-1.25 | 17.92 | 5.00 |
How do you measure a M8 bolt?
You have a full head like this it's always measured a bolt from under the head to the end of the bolt.
What size is a M10 bolt?
Metric Hex Bolt Dimensions
| NOMINAL SIZE (D) | BODY DIAMETER | ACROSS THE FLATS |
|---|---|---|
| m10 | 10.00 | 15.73 |
| m12 | 12.00 | 17.73 |
| m14 | 14.00 | 20.67 |
| m16 | 16.00 | 23.67 |
What size is M8 nut?
M8 (8mm) Thread Size.
What is M10 in MM?
Spanner and Allen Key Sizes
| Size | Spanner | Allen Key |
|---|---|---|
| M8 | 13 mm | 6 mm |
| M10 | 17 mm | 8 mm |
| M12 | 19 mm | 10 mm |
| M16 | 24 mm | 14 mm |
Does M10 mean 10mm?
If the size is M10 x 25, that would mean that the diameter is 10 mm.
What does M8 mean?
M8 means “Mate.” The abbreviation M8 is an informal term of endearment for a friend. Most often used between men, M8 can also be a term of general acknowledgement.
What size is M6 bolt in mm?
6 mm
M6 Threads
M6 refers to a metric 6 mm screw. The outside diameter of the threads is 6 mm. The standard metric rack screw is actually an M6 x 0.1 mm.
How do you read metric bolt sizes?
Determine the length of the metric bolt by looking at the third number. For example, if the metric bolt was M14x1. 5×25, it would have a length of 25 millimeters. Look on the bolt head for the number denoting the strength of the bolt.
What does M8 1.25 mean?
For metric fasteners, you will see a M8 x 1.25 or an M8 x 1. For thread pitch, the distance between two points is the second number meaning the higher the number the fewer threads there are. This means the M8 x 1.25 is the coarse threading and the M8 x 1 is the fine thread.
What does 8.8 mean on a bolt?
So, in English, a Property Class 8.8 bolt is a bolt with a nominal tensile strength of 800 MPa and a nominal yield strength that is 80% of that nominal tensile strength, so 640 MPa.
