Nederlands | English | Deutsch | Türkçe

Project Sports

Questions and answers about sports

Disassembling Shimano integrated gear shifters (brifters)

5 min read

Asked by: Brandon Randolph

2 Answers

  • Release the brake cable.
  • Release the gear cable.
  • Stick a 5mm allen wrench under the rubber cover on the outside of the shifter. …
  • Remove the brake cable pivot pin inside the shifter.
  • Pulling the brake will reveal the screws inside the shifter. …
  • At this point you should be able to remove the plastic housing.

How do you take apart a Shimano gear shifter?

Quote from video: Out. Like that and we might need to compress the brake lever a little bit. And there's the pin there put it aside and so now this will come apart. And there's no parts in here to really loose.

How do you remove Shimano Brifters?

Quote from video: So to remove a set of shifters. You're going to need to loosen the shifter up itself. And that's where you're going to need the five millimeter allen wrench.

How do you take apart a Shimano 105 shifter?

Quote from video: Head just need to go straight in and unscrew. And there it goes that goes over there. But one last piece is remove this set screw in here and sit still two millimeter.

How do you open Shimano ST ef41?

Quote from video: Okay so of course we want to just remove this there's this little plastic cap here on the easiest way I found to do is just to take a little screwdriver.

How do you take apart a gear shift?

Quote from video: So basically in most cases all that you have to do is take the manual shift knob which is right here and simply turn it counterclockwise. Just like that and continue turning in counterclockwise.

How do I fix my Shimano shifter?

Quote from video: So we can usually hit it with wd-40. Break it down let it dry up a little bit and then squirt some maybe some lithium grease back inside. There.

What are Brifters?

Brifters – Brifters a.k.a. brake-shifters combine a brake lever and a shifter designed exclusively for drop bars. Nonetheless, they can also be used on some alternative bars. E.g., mustache handlebars.

How do you remove grip shifters?

Quote from video: Key into the grub screw on the grip shift. And loosen it so it comes off very easily the new grip shift comes with cable slip off your cable cap to make it easy to remove.

What is a downtube shifter?

Downtube shifters are shift levers mounted on the downtube of the bicycle. Not everybody will feel comfortable taking their hand completely off the handlebar in order to shift but for those of us who don’t mind doing so, downtube shifters offer the most minimalistic of gear shifting solutions.

How do I service my Ultegra shifters?

Quote from video: It's clean as a whistle then just dry it off mop up any excess. And then. Simply put some lube on it. So some really lightweight aerosol lube with a bit of PTFE.

How does Shimano STI work?

Shimano Total Integration (STI) shifters use a split-lever design to change gears. A small lever just behind the brake lever shifts the chain onto a smaller cog, while the whole brake lever can be pushed to the side to shift to a larger cog.

How do you adjust a Shimano 105 front derailleur?

Quote from video: What we want to go for this one set up a little too high. So Shimano recommends that you have it at between one and three millimeters off the top of this tooth to the bottom of the derailleur cage.

How do you fix a stuck gear shifter?

Quote from video: And I'm gonna go ahead and stick this down into that shifter release there push down on it and. Now. I can shift into any gear I want to very simple and very straightforward.

How do I remove a shifter knob adapter?

If the adapter in the ball is threaded in, you could screw in a bolt with a jam nut and try to unscrew it. Or with the bolt/jam nut in place, try heating the ball and pulling it off. Of course be careful that you don’t use too much heat to hurt the ball itself.

How do you change an automatic shifter?

Quote from video: So you just need to pop it out it might take a little bit of force just pop it out. You don't need this with the new shift knob I got this shift knob on eBay.

How do you get a broken cable out of a Shimano shifter?

Quote from video: Take your velcro strip wrap it around and pull back on the shifter. So as to expose. The hole in which the tiny fragment of cable appears. And go ahead and try to insert into that hole.

How do you remove Shimano shifter cables?

Quote from video: So remove a little bit of the housing. So you can move it around and then use a knife or something skinny to pop the head out and then go ahead and pull the cable out all the way.

How do you remove a broken cable from a shifter?

Quote from video: Until the head of the cable is lined up with the hole there and then I could use like a small pointy tool like a dental pick push.

How do I take the cable off my gear shifter?

Quote from video: Up at the shifter you'll need to find an access port which is sometimes shielded with a cap. The cable should come out with a metal stop on the end.

How do you change an inner gear cable?

Quote from video: So just knock it down to your highest gear. And then give that cable bit of a push. And a tip pop. So just slide the old one if–. And it's just reverse that procedure to put the new one in.

How do you change a twist shift cable?

Quote from video: Once the shifter turns freely on the handlebar jiggle. And pull the grip apart until it separates into two parts sometimes it helps to very gently pry it open with a flat screwdriver.