Nederlands | English | Deutsch | Türkçe

Project Sports

Questions and answers about sports

What’s this part from inside the steering tube?

5 min read

Asked by: Miranda Brown

What is a steering tube?

The steering tube or steerer, connects the handlebars to the fork blades. The steering tubes of a modern mass-produced fork are of a fixed length. Each is cut to fit a particular bike during assembly.

How do you remove a steerer tube?

Quote from video: Pop it in and then pop it out like that and you fish it out like that. Take your time have some carbs. Don't work on bikes angry or hangry. And there you go and that's you can reuse that.

What is in the motorcycle head tube?

The head tube holds the bearings which allow the front fork steerer tube to pivot freely.

How do you cut a steel steerer tube?

Quote from video: Place the saw guide onto the steerer tube with the campsite closest to the fork leg. Using a loose spacer as a guide carefully score a second line into the steerer.

Do I need to cut my steerer tube?

This helps prevent a cracked steerer tube since the expander provides internal support. If you don’t cut your steerer ensure you have a long enough expander bolt that extends deep enough in line with the bottom of your stem. Leave .
Aug 31, 2008

How do I install star nut?

Quote from video: In today's maintenance. Video we're going to look at how to install. I start up into your four star nut so basically hammer down into your steerer tube.

Can a steerer tube be replaced?

If you have cut your fork steerer too short, got a new frame or bought a second hand fork we can fit a new steerer tube rather than buy a new CSU or fork.

Can you remove a star nut?

The star-nut is basically designed not to be removable. If it is necessary to install another nut, simply use a punch and drive the first nut down until deeper than the new nut will sit.
Aug 22, 2015

Can you reuse a star nut?

Use the old one only until you get your hands on a new one. Those prongs are brittle and can break easily when used too much.
Aug 23, 2004

What is top tube on bike?

The top-tube governs the length between the seat-tube and head tube and so has a significant impact, in tandem with seat angle, saddle position, and stem length, on the ‘reach’ of a bicycle (more of which later).
Jan 27, 2014

What is tapered head tube?

A head tube, tapered or not, is defined by the angle forming the steering axis which creates the trail allowing a bike to work. That angle is defined by the degree of forward offset of the center lower diameter’s center point in relation to the center of the upper diameter.

How does a bike steering work?

As the bike leans this provides a torque on the steering mechanism (front to back torque) that provides a force that steers the tire into the turn. Changing the steering angle or offsetting the axle forward or back changes the effect, resulting in what is called oversteer or understeer.
Oct 1, 2011

Can I cut steerer tube with pipe cutter?

As long as it cuts steel should be able to use basic pipe cutter to trim my steerer tube down right? Yes. And it makes a cleaner, rounder, cut than using a potentially more expensive Park Tool saw guide and hack saw.
Jun 18, 2020

Should I cut my fork steerer?

You’ll need to trim your fork steerer if you’re fitting a new fork, building up a bike from a frame, or have just decided you really don’t need that spare inch that’s above the stem. Here’s how. Carbon is the go-to material when you’re looking for strength, rigidity and light weight.
Mar 6, 2020

Where can I cut carbon steerer tube?

Quote from video: You should really have a carbon specific blade so that's got much finer teeth by the 32 teeth per inch or this which actually doesn't really have any teeth at all and don't know how to describe.

What is the most common steering problem?

Low power steering fluid is one of the most common issues that you’ll have as a driver. Your car will need its power steering fluid topped-up every once in a while, to ensure that the hydraulic power steering system continues to function smoothly.
May 21, 2018

What are the 3 types of steering?

Following are the three types of steering systems:

Bicycle steering. Turntable steering or centre pivot steering. Ackarman steering or side pivot steering.
Nov 9, 2021

What is a steerer tube on a bicycle?

Above the crown, a steerer tube attaches the fork to the bicycle and the handlebars (via a stem) allowing the rider to steer the bicycle. The steerer tube of the fork interfaces with the frame via bearings called a headset mounted in the head tube.

What does steering mean in business?

In business, the steering is in the tracking, review and corrections of people, tasks, metrics and expected results. And it’s often less obvious, and less dramatic, than the big picture. It often takes the discipline of details and consistency over time.
Feb 15, 2016

What is the role of a steering group?

A steering group is similar in its makeup and the sharing of decision making. However, the role of this group is to steer work undertaken by others. Members of steering groups use their experiences, skills and knowledge of specific topics of sectors to help make strategic decisions.

What are five functions of a steering committee?

What’s the role of a steering committee?

  • Responsibility #1: Support the project. …
  • Responsibility #2: Make decisions. …
  • Responsibility #3: Resolve issues. …
  • Responsibility #4: Approving the project budget. …
  • Responsibility #5: Receive status updates. …
  • Responsibility #6: Encourage the project manager.