Nederlands | English | Deutsch | Türkçe

Project Sports

Questions and answers about sports

What is the best pool vacuum for an above ground pool?

7 min read

Asked by: Amy Bryant

The Best Suction Side Above Ground Pool Vacuum The Pentair Kreepy Krauly suction cleaner will quickly and effectively clean any above ground swimming pool, even pools with dished out bottoms up to 72 inches with the help of the flapper.

What kind of vacuum can I use for an above ground pool?

6 Best Above-Ground Swim Pool Vacuums

  • Intex Auto Pool Cleaner. …
  • Hayward Poolvergnuegen PoolCleaner Suction Vacuum. …
  • PAXCESS Handheld Suction Above-Ground Pool Vacuum. …
  • AIPER Automatic Robotic Above-Ground Pool Vacuum. …
  • POOLWHALE Handheld Above Ground Pool Vacuum. …
  • Intex Handheld Above-Ground Swim Pool Vacuum.


Can you use a pool vacuum on an above ground pool?

Fortunately, both manual and automatic pool vacuums can work in an above ground pool. Lower the assembled vacuum into the water until the head is touching the bottom.

What is the easiest way to vacuum an above ground pool?


All we have to do is turn off the pump. And this will automatically. Come right out allowing us to remove the vacuum.

How do you vacuum a dirty above ground pool?

The first is you hook your pool vacuum up to your pump. And you pump it through that way that works if it's a light dirt or a light debris.

Can you use a robotic pool cleaner in an above ground pool?

Robotic pool vacuums take the maintenance tasks off your hands. These vacuums will clean the entire bottom of an above ground pool completely on their own, making them a great option for people who enjoy the set-it-and-forget-it lifestyle.

Can you use a kreepy krauly in an above ground pool?

The Kreepy Krauly E-Z Vac is designed for above ground pools, but its innovative design is based on the Kreepy Krauly in-ground cleaner.

How do I get dirt out of my pool without a vacuum?

A nylon or rubber brush is the correct choice for scrubbing the sides of a soft-sided above-ground pool. A large pool brush makes quick work of the job, but you may need a smaller brush to clean corners. Once the particles have been removed from the sides of the pool, turn your filter back on and agitate the water.

How do I clean my above ground pool that has been sitting for a month?

Recovering Pool Water



Adjust the pH levels as well as the water hardness. Use pool shock until the dark green water turns blue-grey. Make sure the filter is running throughout until the water becomes clear. Use a clarifier and flocculant to coagulate and drop particles to the bottom of the pool.

Can I use a shop vac to clean my pool?

Although you normally clean your pool with a manual pool vacuum or a vacuum device often called a “creepy crawler,” you can clean it with a standard wet/dry shop vac.

How do you remove sediment from bottom of pool?

Off it blows back in this stuff but I'm going to show you this device that works real well I didn't know how well it work when I got it but I have had to modify it it's called a pool vac here.

What is the fastest way to clean a dirty pool?

So you want to know how to clean a green pool two steps you need to take add bottle algaecide this is going to kill all the algae. It's going to turn it white make it real cloudy in the pool.

How do you make a homemade pool vacuum?

So what this pool vacuum is going to allow us to do is actually just leave the pool right where it is we don't have to pick it up and we can suck all the dirt off the bottom of the pool.

How do you vacuum a pool with a garden hose?

She then started to use it on the bottom of the pool. And it works off no effort at all if you use the pump to jumpstart your siphon. And just take it and clean up the debris.

How do you hook up a pool vacuum?

The end of the vacuum hose through the skimmer throat. And plug it into the suction port of the skimmer. And now you're ready to vacuum your pool.

How do I turn my shop vac into a pool vac?

  1. Insert the hose of a manual pool cleaner (or vacuum) into the opening on the side of your shop vac. …
  2. Insert the other end of your pool cleaner into the pool. …
  3. Suck up any dirt and debris along the bottom and walls of the pool.
  4. Empty the shop vac each time it fills up as you go along.
  5. How do you drain the last bit of water from an above ground pool?

    Since both draining methods will not drain pool water to the last bit, you need to remove the extra liquid left at the bottom.



    To do so, you can:

    1. Use a wet vacuum to suck the stagnant water.
    2. Sweep the liquid into the drain.
    3. Remove the pool liner and flip it over somewhere your property to get rid of extra water.


    Can you vacuum wet sand with a shop vac?

    And all that if you don't run a filter and how much sand is just flying all over the place. And if you do run the paper filter. Because it's sand so wet it's going to get saturated. Quick.

    Can you use a shop vac to pump out water?

    A shop vacuum’s ability to suck up water saves you from using towels to soak up water on the floor or trying to squeegee it away. A shop vacuum even acts as a pump to remove larger quantities of water standing in a tub, shower, pool, aquarium, or garden pond.

    Should I remove the filter before vacuuming water?

    You’ll need it—the filter prevents dust from blowing out of the top while you’re cleaning. For wet surfaces, however, you’ll need to remove the filter entirely. Liquids will damage filters, and you could even potentially ruin your vacuum if you suck up water before removing the filter.

    Do you need a wet filter for shop vac?

    you need a filter with a medium filtration level or better. For fine debris (drywall dust, cold ashes, etc) you need a filter with a fine filtration level. For wet pick up, the ideal filter is a foam sleeve. It is important to use the correct filter for your pickup needs.

    Is there a vacuum for water?

    Slurry Vacuum: This vacuum is best for commercial and industrial use. It is a vacuum that sits on top of a standard 55 gallon drum and sucks up water. It is a wet only vacuum, but if you primarily vacuum up wet things – this is the king of the water world.

    Can the Shark vacuum suck up water?

    No and never. It doesn’t operate like a wet vacuum, all water will go thru the motor.

    Are water vacuums better?

    Water vacuums clean better than a canister vacuum. This is primarily because using the power of water as a filtration system is a much more efficient way of cleaning than using an air suction vacuum with messy bags.

    How much does a water vacuum cost?

    While there are many factors that go into determining the final cost of a wet/dry vac, a vac suitable for everyday messes in the home, workshop or garage, you can expect to pay somewhere between $40 – $120.

    What vacuums can pick up water?

    Water Vacuums

    • Kalorik Blue Pure Air – Water Filtration Vacuum Cleaner. Add. …
    • 12V 100W Portable Car Vacuum Cleaner 3200Pa Rechargeable Cordless Handheld Vacuum Waterproof Wet Dry Duster For Auto Home Cleaning. …
    • Portable Car Vacuum Cleaner 3200Pa Waterproof Wet Dry Handheld Duster For Car Cleaning. …
    • MECO ELE wireless vacuum.


    What does a wet/dry vacuum do?

    A wet and dry vacuum cleaner is a versatile cleaning appliance that not only removes dry dust but is also ideal for removing wet spills. The vacuum cleaner doesn’t use bags but two devices to separate wet spills and dry dust.