Nederlands | English | Deutsch

Project Sports

Questions and answers about sports

Upgrade Peugeot 5-speed to indexed flat bar shifters

5 min read

Asked by: Michael Hernandez

Are bar end shifters indexed?

What are bar end shifters? These are gear shifters that sit at the end of your bars, whether that’s drop or straight bars. They have levers that you click one way to shift up and one way to shift down, so are also indexed.

What is an indexed shifter?

In indexed shifting, there are notches in the shift lever that regulate the movement, and when everything is in harmony, a skill-less person shifts perfectly. Friction shifting is shifting without the notches.

What is a downtube shifter?

Downtube shifters are shift levers mounted on the downtube of the bicycle. Not everybody will feel comfortable taking their hand completely off the handlebar in order to shift but for those of us who don’t mind doing so, downtube shifters offer the most minimalistic of gear shifting solutions.

Are friction shifters good?

Conclusion: – Using friction shifters will dramatically reduce the chance of shifter failure on a bike tour. It is simple and easy to change gears and also just as simple and easy to tune.

How do you install bar end shifters?


Quote from video: To attach the right lever find the square mounting surface on the plug mount then match the half circle indent on the lever assembly to the side of the square facing the bottom of the shifter.

What is the point of bar end shifters?

Bar end shifters on the end of the aero bars means the rider can stay in the most aerodynamic position and also change gear. This makes the rider much more efficient, saves energy moving around, and keeps them in the low down fast position.

What are the two types of shifters?

There are two main types of MTB derailleur shifter: trigger shifters and the less common twist shifters. Trigger shifters: Also known as ‘rapidfire’ shifters, these are located below the handlebar. Riders use a thumb button to shift to larger sprockets and a small index-finger operated ‘trigger’ to downshift.

Will friction shifters work with any derailleur?

Any derailleur will work with a friction shifter.

How many types of gear shifters are there?

In general bicycles gear shifters are classified into 3 categories. They are: Thumb Shifters. Twist Grip Shifters.

Are downtube shifters good?

In addition, downtube shifters are excellent for travel. Packing up your bike for a tour is significantly easier than brifters and bar-ends since there are fewer cables and housing lengths to worry about while positioning the handlebars.

How do you shift with downtube shifters?

Lever or Downtube Shifters



The right one shifts the rear derailleur and the left, the front. Pulling the left, or front, lever backwards tightens the cable and pushes the chain up to a bigger front chainring. To shift down, simply push the lever in the opposite direction.

How do you install friction thumb shifters?

Quote from video: And the lever assembly and finger tighten the torque bolt until it's flush with the lever. You for the left shifter the process is mostly the same align.

What are STI levers?

Shimano Total Integration (STI) is a gearshift system designed by Shimano for racing bicycles. It combines the braking and gear shifting controls into the same component. This allows shifting gears without having to remove a hand from the bars, unlike previous down tube shifting systems.

How do you install a Microshift shifter?

Quote from video: Next remove the brake lever from the handlebar. Then slide the shifter onto the bar with the barrel adjuster facing into the bike and the numbers of the indicator facing the rider.

How do you use a Microshift shifter?

Quote from video: Proper setup along the horizontal plane depends on hand size and preference. With all fingers wrapped firmly around the grips. You should be able to reach both thumb triggers.

What is the downtube on a bike?

Down tube. The down tube connects the head tube to the bottom bracket shell. On racing bicycles and some mountain and hybrid bikes, the derailleur cables run along the down tube, or inside the down tube. On older racing bicycles, the shift levers were mounted on the down tube.

How do you use a stem shift on a bike?

Quote from video: So with the big lever you will be changing into a larger sprocket or a larger chain ring depending on whether you using your right hand shifter we were left-hand shifter then the smaller lever.

How does a twist shifter work?

Twist shifters are used by twisting the shifter — placed over the handlebar and serving as the rider’s handgrip — forward or backward to make the gears move up or down. Mountain bikers prefer twist shifters so they can change gears without taking a hand off the handlebars and potentially losing control of the bike.

How do you shift a vintage road bike?

Quote from video: Move the chain away from you when you move the chain away from you it becomes harder to pedal. But you go faster. The easiest way to remember with all these multiple gear.

What gear should I bike in on flat road?

For riding on flat roads, it is recommended to use the middle gear. It is a common choice among bikers as it helps you reduce pressure from your feet onto the pedals.

What gear should you be in going uphill bike?

Low Gear = Easy = Good for Climbing: The “low” gear on your bike is the smallest chain ring in the front and the largest cog on your cassette (rear gears). In this position, the pedaling will be the easiest and you’ll be able to pedal uphill with the smallest amount of resistance.