Nederlands | English | Deutsch | Türkçe

Project Sports

Questions and answers about sports

Is it possible to use a two or three chainring with an internal hub?

5 min read

Asked by: Denise Davis

What are the cons of three front gear rings?

In my experience (read, my opinion) a triple does offer a couple of “cons”:

  • Maintenance for a triple is a bit more complicated. Instead of adjusting a front derailleur for two positions you have to adjust for three positions. …
  • A triple creates more chances at cross chaining.

How does 3 speed internal hub work?

Three speed hubs use a planetary gear system to achieve a gear ratio between the sprocket and the wheel. In this gear system the sun gear is fixed in place while the planet carier is rotated. This causes the planet gears to rotate which in turn causes the ring gear to rotate. The rider selects a speed using a shifter.

What is a triple chain ring?

A triple chainset is essentially a double with a smaller chainring bolted on. Triple chainsets require special front derailleurs and shifters, along with a matching long cage rear derailleur to accommodate the long chain needed to cover the full range of sprocket options.

Can you mix and match chainrings?

Most likely yes, one thing to consider is that not all teeth are the same, they are very similar but different manufacturers use different tolerances and such. So between brands you may get some shifting issues, but often times they will work just fine.

How do I adjust my 3-speed internal hub?

Quote from video: This at that point we can take this barrel adjuster and twist counterclockwise. And that'll start to move the indicator.

Is a 3-speed bike good for hills?

Q: Is a 3-speed bike good for hills? Yes, a 3-speed bicycle is a great choice if you’re riding a route with hills. The different gear options will allow you to adjust for inclines, downhill rides, and regular flat terrain.

What is the best crankset for climbing?

11-34T cassette is the cassette with the highest sprocket from Shimano. It is used for very steep hills. A combination of a 52 36 crankset with an 11-34 cassette will help you climb hills that are difficult on an 11-28. The 34T will give you the easiest gear possible and help you spin faster while climbing.

What is the difference between double and triple front derailleur?

A “double” front derailer has an inner cage plate that extends down only slightly farther than the outer plate. A “triple” front derailer has an extended inner plate that goes down considerably lower than the outer plate.

What is a double chainset?

Different chainsets make a big difference to the character of your bike and the way it feels when you ride. Check out our Beginner’s Guide: Understanding Gears here. Most road bikes come with a double chainset, meaning that you have two chainrings.

How do you shift an internal gear hub?

Shifting will be much improved by letting off some pressure on the pedals at the time of shifting. On internally-geared bikes: The hub will shift when pedaling forward, coasting, at a stand still or back pedaling. Smooth shifting is dependant on letting off pedal pressure at the time of shifting.

How do you ride a 3 speed bike?

Quote from video: If you want to go from first to ninth shift here first then shift up once here. That's going to create less torque on the chain. It's going to be a smoother ride. Easy to easier to shift.

How do I fix my Sturmey Archer 3 speed?

Simple and quick

  1. Step 1: Select high gear. Select high gear.
  2. Step 2: Take up all the slack in the indicator chain. Back off the locknut. …
  3. Step 3: Loosen the chain slightly. Back off the adjuster so the chain is slightly loose, so you can move it from side to side a wee bit without feeling any tension. …
  4. Step 4: Check.

How does a Schwinn 3 speed hub work?

Quote from video: Move out of engagement with the ratchet ring in the hub shell so these poles are not driving the hub shell. So as we rotate the cog. We see that the planetary gears are giving us a gear reduction.

What is 3 speed internal bike?

The three-speed bicycle is a bicycle that uses internal hub gears at the rear wheel hub to provide three gear ratios. Three-speed hubs have been in use since the early 1900s. Though they are heavier than comparable derailleur systems, internal-gear hub systems generally last longer and require less maintenance.

How does a Sturmey-Archer 3 speed hub work?

Quote from video: And an output and a reactionary or fixed in the Sturmey Archer hub the reactionary gear is always the Sun gear as it is affixed to the axle it is the only non moving part in the hub.

How do you ride a 3 speed bike?

Quote from video: If you want to go from first to ninth shift here first then shift up once here. That's going to create less torque on the chain. It's going to be a smoother ride. Easy to easier to shift.

What is the fastest gear on a bike?

High Gear = Hard = Good for Descending: The “highest” gear on your bike is the largest chain ring in the front and the smallest cog on your cassette (rear gears). In this position, the pedaling will be the hardest and you’ll be able to accelerate while traveling downhill.

What is gear 7 on a bike?

These gears will range from 1, which is the easiest gear, to 7, which may be referred to as a ‘high gear‘ and is most suitable for riding fast downhill, or on the flat. A 7 speed cassette is often found on city bikes, hybrid bikes, and children’s bikes.