Nederlands | English | Deutsch | Türkçe

Project Sports

Questions and answers about sports

How wide is a 12ft jon boat?

6 min read

Asked by: Mike Bornschein

How wide is a 12-foot Jon boat? Around 48 to 60 inches on average.

What are the dimensions of a 12 foot Jon boat?

Jon Boats are available in a range of sizes with typical common lengths around 12’2” (3.7 m), widths of 4’3” (1.3 m), depths of around 2′ (. 61 m). Jon Boats are flat-bottomed boats with two or three bench seats ideal for fishing, hunting, or civilian protection during floods.

How wide are most jon boats?

Jon boats sold commercially vary in width related to their length. 8-foot jon boats average 32 inches; 10-12 foot boats average 34-40 inches; 14-16 foot boats average 42-50 inches, and 18+ foot jon boats can be up to 60 inches wide.

How wide is a standard Jon boat?

Jon boats are available commercially between 8 and 24 feet (2.4 and 7.3 m) long and 32 to 60 inches (81 to 152 cm) wide, though custom sizes may be found. The simple design includes an open hull, without a bilge, leaving the ribs exposed.

How do you measure the width of a Jon boat?

Measure from the middle of the bow to the center of your transom down the length of your Jon. You can check it at two points along the top and bottom of your Jon boat to ensure your measurement is correct. Width. Width is measured at the bottom of the boat from one side of the boat to the other.

Where do you measure a boats width?

The beam refers to the width of your vessel. This should be measured at the widest point of the boat. The widest point is generally somewhere in the middle.

How wide is a 1448 jon boat?

Specifications

Length 4.27 m 14′
Bottom Width 1.22 m 4′
Max. Recommended HP 25 HP
Max. Person Capacity 3 persons
Max. Person Weight 192.78 kg 425 lbs.

Is a 12-foot jon boat big enough?

A 12-foot jon boat is perfect for teaching young anglers how to fish. You can access small unpressured waters, and because you’re sitting close to each other (unlike in a canoe), it’s easy to help them with gear problems — and take pics of a big fish before letting it go.

How much can a 12-foot jon boat hold?

An average 12 feet (3.65 m) long Jon boat weighs 120 pounds (54.5 kg), excluding an engine. It can hold about 400 to 450 pounds (181.5 – 204 kg) of extra load. Thanks to a maximum of 5 to 7 HP, this vessel has a top speed of 10 to 15 mph (16 – 24 km/h).

What is the most popular size jon boat?

Jon Boats are commercially produced between 8 and 20 feet in length (though sometimes longer), with the most common sizes being 10-16 feet long. Their flat bottom allows the boat to have a shallow draft (distance between the water line and bottom of the boat) and be able to access a broad range of bodies of water.

What are jon boats good for?

Jon boats are essentially flat-bottomed, utility boats. They are used for a variety of different tasks, from hunting to fishing to collecting lumber. Because of the flat shape of the hull, Jon boats tend to sit on top of the water as opposed to cruising through it.

How long do jon boats last?

But, how long will a Jon Boat last? Aluminum Jon Boats can last decades, if not a lifetime. Their aluminum hulls are inherently durable, not prone to rust, and is incredibly strong. If cared for appropriately, there’s no reason a Jon Boat shouldn’t last up to 30-50 years or more.

What’s the smallest jon boat?

8 feet (2.5 m) long Jon boat

This Jon boat has the smallest size with a minimal weight capacity. It is practical for one passenger but unstable, making it inadequate for deep waters. Crew – One adult with light gear; an adult and a kid.

How wide is a fishing boat?

On average, the best-selling bass boats are 95 inches wide. However, the width of the beam can differ between manufacturers and will typically be determined by the length of the bass boat, but that average width is very typical with the most popular models.

How heavy are Jon boats?

You can expect an average jon boat weight to be about 500 pounds (227 kg). Most jon boat trailers weigh about 400 pounds (181 kg). The average boat weight with trailer is approximately 900 pounds (408 kg).

What is a 1436 jon boat?

Overview. The TRACKER® TOPPER™ 1436 jon boat is our lightest 3-angler aluminum boat. It’s reinforced with aft foam boxes, corner braces at transom and aluminum ribs that extend up sidewalls for strength—so it’s tough enough for a ride in the back of the truck down an old dirt road to your secret fishin’ hole!

How wide are 14 ft jon boats?

How wide is a 14-foot Jon boat? Around 57 to 70 inches on average.

Who makes the deepest jon boat?

SeaArk is well known for creating the World’s Largest Jon Boat in 1994 at 24 feet long and 72” wide. It has since upped the ante by creating a 26-foot jon boat. In addition to toting the title of World’s Largest Jon Boat, SeaArk Boats can also claim the title of the #1 Catfishing Boat.

How much does a 1436 jon boat weight?

Smoker Craft 1436: weighs 182 pounds with 720 pounds of carrying capacity. G3 Boats 14 Foot (average of 14 foot models): weighs 190 pounds with 685 pounds of carrying capacity. Lost Creek 14 Foot: weighs 145 pounds with 552 pounds of carrying capacity.

What is the biggest motor you can put on a 12ft jon boat?

It can use up to a 9.5 HP motor, and 600 lbs.

How big of a motor can you put on a 12-foot jon boat?

12-foot jon boats have an average weight capacity of 420 pounds and an average maximum horsepower of about 5 to 7 HP, however, some models allow up to 10 HP. A 5 HP motor is expected to have a top speed of 10mph. 7 HP could have 15mph or more. This speed is great when riding in slower moving rivers and streams.

How much does a 12-foot boat weigh?

12-foot Jon boat

12-foot Jon boats have an average dry hull weight of 111 pounds or 50 kg.

How much does a 12ft aluminum boat and trailer weigh?

Whether it is a 12 foot aluminum boat or a 21 foot pontoon boat, the most common question I get asked is how much does a boat and trailer weigh.
Aluminum Fishing Boat and Trailer Weights.

Aluminum Boat Make and Model Dry Weight Package Weight (Boat, Trailer, Motor)
Tracker Targa V-18 WT 2060 lbs 3704 lbs

How do I make my jon boat hold more weight?

Add flotation pods

Because the stern houses the heaviest items on a jon boat like the gas tank, engine, and battery, you can add buoyancy to the boat by counteracting the weight on that side of the boat by adding flotation pods. The flotation pods should be added on the outside of the boat, one to each side of the aft.