How much does pool acid cost?

Asked by: Jennifer Lowe

Average pool acid wash cost is $202, cost ranges between $178 to $225 for a pool measuring 500 square feet, according to Improvenet.com in the US in 2020.

Is it worth it to acid wash pool?

Lack of pool cleaning, improper pool pH balance, and low pool circulation are all causes of algae growth. The algae growth can cause health issues along with clogged pool filters. Pool acid washing can help remove algae growth and prevent any further damage from occurring to you or your oasis.

How long does it take to acid wash a pool?

On average, the first time performing an acid wash can take two to three full days between draining, cleaning, and refilling the pool. As mentioned earlier, acid washing is an extremely labor intensive project, and it removes a thin layer of your pool surface each time it’s done.

Can you acid wash a pool without draining?

In a nutshell, a no-drain acid wash is lowering the pH level of your pool so that your pool water becomes acidic and alkalinity close to zero. When this level is hit, some vigorous scrubbing will be required to peel off a bit of the pool surface, essentially giving you an acid wash without draining the pool.

Can you put too much muriatic acid in pool?

If you do add too much muriatic acid, your pH levels can dip dangerously low, and your pool water can cause rashes and eye irritation. Low levels of pH can also damage metals in your pool like ladders, railings, screws, bolts, and other important equipment.

Can you acid wash your own pool?

I'll show you how I will use soda ash basically you want to use two pounds of soda ash for every one gallon acid for the acid wash. Clean about a case of acid.

Can you swim in pool after acid wash?

According to Clean Pool and Spa, you should wait no less than two hours before swimming in a pool which has been treated with muriatic acid. According to the website, “If you pour muriatic acid in the pool and swim within 10 to 15 minutes you might get a ‘hot spot’ of acid that can burn you.”

How much does it cost to acid wash a gunite pool?

The national average materials cost to acid wash a pool is $0.06 per square foot, with a range between $0.06 to $0.06. The total price for labor and materials per square foot is $0.44, coming in between $0.40 to $0.48. A typical 300 square foot project costs $131.79, with a range of $119.76 to $143.82.

Will muriatic acid clear a green pool?

Your pool is probably a green cloudy mess, so you’ll want to add two chemicals to begin the clearing process: Pool Acid – also known as Muriatic Acid. Pool Bleach (bought in the big yellow jugs) also known as Sodium Hypochlorite.

Does acid wash remove black algae?

Don’t drain and acid wash your pool to remove black spot algae because it will just come back again. Draining the pool is not effective because the algae also lives in the pipework, solar heaters, filter and pump.

How long do you have to wait to get in pool after muriatic acid?

After Adding Muriatic Acid



Muriatic acid can create a hot spot of acid in the water that could potentially burn or irritate your skin. It is best to wait 30 minutes after adding it to your pool.

How long should you run pool pump after adding acid?

You want to make sure the pump is running for at least 1/2 hour, preferably even an hour, during and right after after adding most chemicals. Running the pump longer than 1/2 hour is just fine, particularly if you would normally have it running anyway.

Can I add acid and shock at the same time?

Despite being chlorinating agents, they are incompatible. Do not add at the same time or mix muriatic acid and chlorine. Such interaction produces a toxic gas that is dangerous to health even in small amounts. A good rule of thumb is to never mix pool chemicals with each other.

Why does my pool need so much acid?

Why do Swimming Pools need acid? The reason we add acid to swimming pools is reduce the pH (Potential Hydrogen) of the water. The pH is always slowly rising due to either chlorine being added manually or produced through salt chlorination.

How do I add acid to my pool?

You can only add the equivalent of a quart or 4 cups of muriatic acid at a time you won't need to stir the bucket. So pour around the perimeter of the pool. Depending. On the size of your bucket.