How much does it cost to convert a vinyl pool to concrete?
3 min read
Asked by: Tamara Brown
Depending on where you live this usually amounts to somewhere between $3000 to $5000. So if you already have a vinyl liner pool and it would cost so much to upgrade to a concrete pool installation, why would anyone want to convert their pool? The main reason is property development.
Can I convert my vinyl pool to concrete?
It is very easy to change your existing pool into a Concrete/Gunite Pool. With this option you can shallow or deepen the pool. From there you can retain the shape that you currently have using the existing walls to shoot up against.
Can a vinyl pool be converted?
Yes you can do this however it's not as much of a conversion. As you might think essentially. All you would be left with from a vinyl liner pool is a hole in the ground and that hole technically.
How do I upgrade my vinyl pool?
Challenge with replacing it is you have to break out the concrete. Around it dig it all out break it out because it's footed under there with tons and tons of concrete.
What is behind a vinyl pool liner?
Over here that's the main drain where the water gets sucked up from the bottom. And over here is the pool skimmer that skims the top of the water.
How long does a cement pool last?
How Long Will a Concrete Pool Last? A concrete pool should last decades (we’re talking 50 years or more) if it is properly maintained. While the shell of the pool can become damaged if the building was not done correctly, a well-constructed concrete swimming pool should last a lifetime.
Can you tile a vinyl pool?
Can a Vinyl Pool Have Stone and Tile? Yes, you can use stone, brick, or any natural material as the coping around a vinyl pool, as shown in the picture on top of the page. You can even install real tile around the border perimeter, which hangs over the top of the wall.
How much does it cost to convert a vinyl pool to fiberglass?
On average, it costs $50,000–$65,000 to replace a vinyl liner pool with a fiberglass unit. For reference: that’s $3,000–$7,000 more than installing a fiberglass pool normally.
What is the difference between a vinyl pool and a concrete pool?
Concrete pools cost $50,000 or more and require expensive long-term maintenance. They can be any shape but take 3–6 months to install. Vinyl liner pools cost $25,000 or more and need the liner replaced every 5–9 years. They take 3–6 weeks to install but tend to look cheap.
How long should a inground pool liner last?
The typical lifespan of a vinyl liner is anywhere from 15-20 years and where your liner falls in that range depends, most crucially, upon your proper maintenance of the pool’s chemistry.
Can vinyl liner pools be salt water?
If you have a vinyl liner, you’ll be happy to know you can use a salt chlorinator system in your pool without taking any extra precautions. The liner will be exposed to lower levels of chlorine, so it may even extend your liner’s lifespan. However, many inground pools have galvanized walls behind the liner.
What happens if water gets behind pool liner?
If water does get behind the pool liner, it can lose its seal – this allows wrinkles to form and the liner to develop soft spots. Should this occur, the liner can lift and float, but DON’T PANIC, and don’t start swearing at your pool company- as they have done nothing wrong!
