Nederlands | English | Deutsch | Türkçe

Project Sports

Questions and answers about sports

How does a pressure washer turbo nozzle work?

6 min read

Asked by: Michael Schobinger

How Does a Turbo Nozzle Work? A rotary turbo nozzle automatically spins a zero-degree spray tip in a 4-8 inch circle at 3000 rotations per minute. The spinning water jet hits the surface area from multiple angles, quickly breaking down caked-on dirt and grime. As a result, rotary nozzles can cut cleaning time in half.

Is a pressure washer turbo nozzle worth it?

Turbo nozzles have been one of the most important accessories developed. These efficient tools provide the power of a zero-degree pattern. The circular motion also adds extra agitation to cleaning tough jobs like caked-on mud. They are designed to provide a 200% cleaning efficiency over a 25-degree flat fan nozzle.

Does turbo nozzle increase pressure?

A turbo nozzle temporarily replaces the fan nozzle on your water blaster to increase cleaning pressure by about 60%. For example, it would increase this Washmate-10’s pressure from 2,200 psi to around 3520 psi.

Will a turbo nozzle remove paint?

You may also be able to use a turbo nozzle when pressure washing to remove exterior paint. The turbo nozzle combines the force of a 0-degree nozzle with the spray area of a 25-degree area along with a rotating head that pulses water at speeds between 1800 rpm to 3000 rpm.

What is inside a turbo nozzle?

Basic. Inside you have a nozzle. It's got a ceramic tip on the end. And this is made of a plastic composite.

What is the strongest nozzle for a pressure washer?

Red Spray Tip

Red Spray Tip (0-Degrees)

The red spray tip creates a 0-degree spray pattern and is the most powerful nozzle of them all. You need to be very careful using this tip to make sure you don’t cause any damage to the surface you are cleaning.

How do you fix a turbo nozzle?

If there's already a nozzle in the wand. Go ahead and remove it to do that you pull back the release collar. And pull the nozzle away from the wand.

What tip to use to pressure wash a deck?

Typically decks will need anywhere from a 25-degree nozzle (for more stubborn build-up) to 40-degree (for newer decks with less damage or synthetic wood). The higher the degree the less pressure at point of contact.

How do I choose a pressure washer nozzle?

The Best Nozzle Size & Angle

Avoid narrow-angle nozzles when you’re new to power washing. In case the nozzle you choose has damaging effects, always test on a small area. Sticking to a 25-degree or 40-degree tip should eliminate the risk of surface damage, but this extra precaution is still important.

What tip to use to pressure wash a car?

For your paintwork and glass exterior, we recommend a 40-degree nozzle. For your wheels and tires, we recommend a 25-degree nozzle to wash away all that brake dust and any embedded soils stuck to your rims and sidewalls.

What PSI is turbo jet power washer?


80psi Turbo Jet Power Washer 29.5″ – Steel – As Seen on TV.

Are rotating pressure washer nozzles better?

Rotary Nozzles (sometimes referred to as Turbo Nozzles) can have up to ten times the cleaning power of a normal pressure washer nozzle. They offer a powerful, circular motion wash, by rotating a zero-degree at high speed. Because it spins around in a small diameter, it gives superior blasting power.

How do you size a turbo nozzle?

Determine the nozzle size by the pressure washer’s GPM @ PSI (gallons per minute @ a specific pounds per square inch) . If the nozzle size is too small, your equipment can be damaged . If the nozzle size is too large, cleaning ability is compromised .

What do the numbers on a pressure washer nozzle mean?

Pressure Washer Spray Nozzle can be identified by the nozzle “number”, a four or five digit number that is stamped on the nozzle, which indicates the spray angle and orifice size. In all cases the first two digits of the nozzle number indicate the spray angle (disperse) in degrees.

What do the colors mean on pressure washer nozzles?

The color of the nozzle identifies the angle of the spray fan pattern measured in degrees and is generally the same across all sizes. Red is 0, Yellow 15, Green 25, and White 40. The black nozzle is used for applying soap at low pressure and is sometimes used for low pressure rinsing.

How do you read a nozzle chart?

On a standard nozzle chart, the top column that runs left to right is the pressure that you want to obtain. The left column top to bottom is the nozzle orifice size designation. The top to bottom column next to the orifice size column indicates the actual orifice measurement.

What do nozzle numbers mean?

Most companies identify their flat-fan nozzles with a four or five digit number (Figure 2). The first numbers are the spray angle and the other numbers signify the discharge rate at rated pressure. For example, an 8005 has an 80 degree spray angle and will apply 0.5 gallons per minute (GPM) at rated pressure of 40 psi.

How does a spray nozzle work?

Single-fluid or hydraulic spray nozzles utilize the kinetic energy imparted to the liquid to break it up into droplets. This most widely used type of spray nozzle is more energy efficient at producing surface area than most other types.

What are the different types of nozzles?


  • Nozzle.
  • The Nozzle Tip is one of the most important and least expensive part of a spraying system. Adjustable nozzle.
  • Double swirl spray nozzle.
  • Selecting a spray nozzle.
  • Hollow cone nozzles-Disc and core type.
  • Flat fan nozzles.
  • Floodjet nozzles.
  • Adjustable nozzles.

How do I choose a spray nozzle?

The best method for choosing the correct nozzle tip size is to determine the gallons per minute (GPM) of nozzle output required and then select a nozzle tip size that, when operated within the recommended pressure range, will provide this flow rate.

Which spray nozzle do I need?

Selecting Your Nozzle Size

You’ll want to determine the nozzle flow rate at gallons per minute (gpm). To find that, start with your application rate in gallons per acre (gpa). Next, find an efficient and safe ground speed in miles per hour (mph). Then, determine the spray width per nozzle (W).

What is a flow nozzle?

A flow nozzle is a device used for determining fluid flow rates when the fluid enters or exits a pipe via an orifice at high pressure and high temperature. It offers certain clear benefits over thin orifice plate.

Does a nozzle increase flow rate?

The purpose of using a nozzle is to accelerate the flow to achieve critical or sonic conditions (i.e., choked flow) at its throat. This happens as the pressure differential upstream and downstream the nozzle increases.

What is Venturi nozzle?

Venturi Nozzles combine the best features of a Venturi Tube and a Flow Nozzle into one single unit. These accurate devices are ideal for measuring the flow of high velocity, non-viscous fluids (e.g. Steam and other high velocity gases).