July 3, 2022

Project Sports

Vragen en antwoorden over voetbal en sport

How does a hay press work?

5 min read

Asked by: Grey Loftis

The hay is loaded into the hopper, the horse walks in a circle to operate the plunger that compresses the hay, and the finished bales come out the back. This one-horse press could bale about 1000 pounds of hay an hour. Widely used by 1880, it was powered by gasoline engines in around 1910.

How does a hay roller work?


Up hay is fed through the machine into a series of belts. And rollers which form it into a bale as the bale grows the belts maintain.

How does a baler machine work?

How Do Balers Work? Balers have a steel frame that supports a hydraulic ram powered by an electric motor-driven pump. Hydraulic oil is then pumped under pressure to the cylinder and moves the plunger (ram) against the material that is being baled. The material is packed into a dense block (bale) in the bale chamber.

How does a hay stacker work?

The stacker would lift a bunch of hay and place it in a hayrack on top of a rope sling, then another and another. The hayrack would be pulled home, placed in front of the barn and, with a small tractor hooked to the end of the hay rope, the slings full of hay would be pulled up and into the haymow.

How does a baler pick up straw?

The straw windrow is lifted from the ground by a pick-up reel having spring teeth (14) and transferred continuously to a conveying and feeding mechanism (3) as the baler moves forward along the windrow.

How does a hay baler knotter work?

The needles are brought up and deliver the twine to this notch in the disc. The disc rotates. And the needle goes back down to its home position as the rest of the operations.

What is hay baler machine?

A hay baler is a device used to make bales of hay from rows of cut hay. There are several different hay baler types, with each producing a tightly compressed bundle of twine-tied hay. Some balers produce small, square bales of hay, while others produce large, square bales.

What is the difference between a baler and compactor?

Balers are used to manage recyclable commodities that are bound for storage and shipping by using baling wire or twine. Compactors are used to reduce the size of the trash, allowing for more waste to be hauled away at a time.

How much does a baling machine cost?

Balers costing below $100,000 can be generally classified as low production balers. A mainstream high-production baler can cost between $100,000 and $750,000 or more depending on options. Ferrous balers can cost between $180,000 to $1 million.

What are the parts of balers?

Below are the common parts of a baling machine.

  • Hydraulic Cylinder: This part exerts the required force to compress the material. …
  • Ram: …
  • Hydraulic System: …
  • Oil Filter: …
  • Motors and Other Electrical Components: …
  • Proximity Switches and Other Types of Sensors: …
  • Control System: …
  • Bale Chamber:

Why are hay bales round?

Farmers often bale hay in large round bales instead of small square bales because they require less labor to bale and move than small square bales. The shape of round bales enables them to be stored outside, something you would never do with square bales. Rain and snow naturally run off their curved sides, like a roof.

What are round hay bales called?

The two most common options are large round bales, also called rolls, and small square bales.

How does a grass baler work?

The round baler picks the hay from the ground and feeds it into the bale chamber. The hay is then wrapped onto itself by means of six to eight long rubber belts which are around 7 inches wide. As extra hay is picked up and drawn into the baling system, the bale becomes spherical and fills the bale chamber.

How do you round bale hay?

It's got the tines in the front that rotate backwards in this case clockwise. Into the chamber it's a long rope. Goes in there he has to swerve left to right and actually the monitor.

What time of day should you bale hay?

With all of these factors in mind, it is best to cut hay when there is the greatest opportunity for successful drying, or early in the morning after the dew has dried off. As the old saying goes, “make hay while the sun shines!”

How fast should you bale hay?

5-10 depending on windrow size and horsepower. Going faster makes heavier bales.

How do you feed round bales without a tractor?

So if you guys got some rail bells like I do back here behind me I'm going to show you all how to move that without using a tractor.

How can I load hay without a tractor?

How I move a large round bale of hay or alfalfa. Let's say or straw. But no straw I get small bales but that is by using this contraption called a bale dolly. And it attaches to the back of my pickup.

How do you bale hay without equipment?

Now we're gonna take this really good straw. And I'm gonna show you guys how to Bale this using no equipment today here on the farm vlog.

How much does a round bale of hay weigh?

Round Bales

Size Dimension(Width x Height) Weight
Small 4 ft x 4 ft 400 to 600 lbs.
Medium 5 ft x 4.5 ft 720 to 950 lbs.
Large 5 ft x 6 ft 1270 to 1700 lbs.


How many square bales are in a 4×5 round bale of hay?

If the large round-bale weighs 1,200 pounds and the small square bales weigh 40 pounds, then one large round hay bale would be equal to 30 small square bales. It important to know the weight of hay bales both for feeding and economic purposes.

How much should a bale of hay cost?

On average, a bale of hay costs around $15. For example, two wired Alfalfa Hay bales typically run high, costing $19.95 apiece, whereas bermudagrass is only $8.75. Timothy Hay is the most expensive, typically costing at least $20 a bale.

Copyright © All rights reserved. ProjectSports.nl