Nederlands | English | Deutsch

Project Sports

Questions and answers about sports

How do you close an above ground pool with a sand filter?

3 min read

Asked by: Shea Parson

How do you close a pool with a sand filter?


You have to blow out your return Jets and your skimmers. And you can usually do this using a shop vac or an air compressor.

How do you winterize an above ground sand filter?

Put it right into that pump strainer basket and the same with anything you remove elsewhere. In your system that's where you store it for the winter.

How do you winterize a sand pool filter pump?

The next step is to now properly winterize our sand system first thing we want to do is put our handle on the winterized position on top of our valve. Our next step is to release and unscrew both

Can you leave a sand filter out all winter?

If you store your filter in a shed or a detached Garage make sure you cover your filter and keep it away from chlorine or any corrosive chemicals that off gas. Sand filters should be left outside.

How do you close a pool with a Hayward sand filter?

Four sand filter winterizing every sand filter will have a cap or plug at the bottom and that will drain the water out of the whole tub of the filter. Sometimes you got to run the garden hose inside

How do you close an above ground pool without draining it?

If you have an above ground pool just make sure you remove the hose off the bottom of the skimmer. And make sure you install a winter cover plate. On your above ground pool.

How do you winterize an above ground pool with a sand filter and heater?

If you’re trying to winterize an above ground pool with a sand filter, then the first step is walking over to your multiport valve and set it to “Winterize”, or any equivalent setting that allows the filter to drain. After that, simply remove the plug at the bottom of the filter.

Do you drain pool filter for winter?

After a backwash and rinse, place the valve to the “winterize” setting on the top mount valve. This will allow water to drain from the valve. Next, you’re going to have to completely drain all the water from the filter tank. To do this simply unscrew and remove the drain cap on the bottom of the filter barrel.

Can I leave my pool pump out in the winter?

Pump motors can develop rust deep inside the motor which can keep the motor for working come springtime. Keeping pumps away from accumulating moisture (assuming you live in a place that gets considerable rain/snowfall) during the winter is a good way to protect the equipment.

How do I winterize my above ground pool pump?

And other filter equipment in a warm dry place all winter long if your pump and filter are too cumbersome or heavy to move just make sure that you remove all the drain plugs.

How do I winterize my Hayward sand filter?

How to winterize the Hayward sand filter

  1. Completely drain tank by unscrewing drain cap at base of filter tank. Leave cap off during winter.
  2. Depress Vari-Flo control valve handle and rotate so as to set pointer on valve top between any two positions. This will allow water to drain from the valve.


How do you close an above ground pool for the winter?

How to Close Your Above Ground Pool in 10 Steps

  1. Step 1: Deep Clean. …
  2. Step 2: Balance your Water. …
  3. Step 3: Add Winterizing Chemicals. …
  4. Step 4: Add Pump Protector. …
  5. Step 5: Protect Your Return and Skimmer. …
  6. Step 6: Prepare Your Filter for Hibernation. …
  7. Step 7: Clear the Pool. …
  8. Step 8: Set Up Ice Equalizer Pillow.

Do I need to shock pool before closing?

Shocking kills any bacteria that might linger in your pool during the winter. We recommend shocking a few days before you close the pool. If that is not possible, make sure to shock the pool the night before you close it for winter.

Can you leave an above-ground pool up in the winter?

It’s possible to leave your above-ground pool up all winter with the water in it, since draining it completely may cause it to collapse.