How do you clean a Pebble Tec pool with chlorine?
3 min read
Asked by: Joseph Broad
The only way to rid your pool of green or mustard algae is to get a chlorine wash (also called a chlorine rinse). After draining your pool, fill a watering can with liquid chlorine and some water. Pour the mixture over the sides and bottom of your pool, then rinse the pool off. Pump the wastewater out when finished.
How do I clean my Pebble Tec pool surface?
Skim large debris out of your Pebble Tec pool regularly to keep the water clean. A buildup of debris can disrupt the chemical balance within the pool. Keep stains from forming on the pebble finish of your Pebble Tec pool by using a pool stain remover.
How do I remove stains from my Pebble Tec pool?
Pour 1/2 gallon of warm water into a bucket. Add 1/2 gallon of white vinegar. Soak a sponge in the vinegar solution. Wipe down the Pebble Sheen surface to remove stains left by mold or mineral deposits.
Does Pebble Tec need to be acid washed?
Because of the Valley’s hard water and high summer pool evaporation, we recommended you drain and acid wash your pool every two to four years to help remove excess calcium, algae and other contaminates that may lead to interior pool staining and that unsightly white ring on your pool tile and pebble-tec surface.
Can you shock a Pebble Tec pool?
Make sure you’re keeping the alkalinity and calcium hardness in balance, and use a shock that’s made of calcium hypochlorite. Liquid shock will work but it’ll throw your pH to the moon, requiring the use of acid to lower it, which will tank your alkalinity, which will hurt the pebbletec.
Can you use a wire brush on a PebbleTec pool?
Guest. The SS brush will not harm the PebbleTec. It is a great brush for the entire pool also, if you choose to use it.
What does acid wash do to PebbleTec?
Pebble Tec Pools
An Acid wash consists of a mixture of water and muriatic acid. The acid makes contact with the pools surface and gently removes a small layer, revealing a fresh layer of plaster underneath. This type of cleaning is intense and best-suited for removing tough surface stains from plaster and Pebble Tec.
How do I clean my Pebblecrete pool?
How To Clean A Pebblecrete Pool
- Drain The Pool Completely. …
- Break Out Your Pool Cleaner Or Liquid Chlorine And Start Scrubbing. …
- Use A Pressure Washer For Better Results. …
- Consider Acid Washing For Black Stains Or Significant Stains. …
- Avoid Future Stains By Keeping Your Pool And Water Clean.
How do you remove black algae from a Pebble Tec pool?
Step-by-Step Guide to getting rid of stubborn black algae
- Check the Water Chemistry In Your Pool.
- Brush the Pool Surface. We cannot stress brushing the pool surface enough. …
- Keep Your Chlorine Levels Nice and High. …
- Brush Your Pool Again and Again. …
- Vacuum Any Waste. …
- Clean Your Filter.
How long does a Pebble Tec finish last?
20 years
How Long Will Pebble Tec Last? Traditional pool resurfacing materials require a high level of maintenance and will only last 5-10 years before it needs to be replaced. We generally would expect a Pebble Tec surface to last upwards of 20 years with proper maintenance.
How often do you resurface PebbleTec pool?
Durability: A Pebble Tec surface should last 20+ years with the proper care and maintenance. A plaster pool should be re-plastered approximately every 5 years.
Is PebbleTec worth?
Overall. Pebble Tec pools are works of stunning beauty that can last for decades. They are an excellent choice for any pool. Once established, they’re easy to maintain.
