How do I get rid of an empty above ground pool with algae?

Asked by: Jason Chaitanya

How To Clean A Green Above Ground Pool

1. Draining An Above Ground Pool. Start by draining the above ground pool with a sump pump, siphon, or other means. …
2. Cleaning Up The Mess. Once the pool is nearly empty you can scrub the walls and bottom of the liner to remove stubborn algae and debris. …
3. The Pool Is Now Open.

How do you clean algae out of an empty pool?

1. Scrub the pool walls with a long-handled scrub brush. …
2. Vacuum the dirt and algae out of the bottom of the pool.
3. Spray the pool walls down with a hose, wetting the entire area. …
4. Mix the acid wash. …
5. Pour the acid mixture down one section of the pool wall.

How do you clean an above ground pool that is empty?

1. Step one: Drain the pool. …
2. Step two: Remove the dirty pool liner. …
3. Step three: Prepare the pool liner. …
4. Step four: Make a cleaning solution. …
5. Step five: Scrub the pool liner. …
6. Step six: Wash the pool liner. …
7. Step seven: Dry the pool liner. …
8. Step eight, option A: Refill the pool.

Should I drain my above ground pool to get rid of algae?

Should I drain my pool to get rid of algae? Yes, you can because it saves time and money, but only if you do it properly. Use the main drain in your pool and drain water through the filter pump. Or rent or borrow the pump, place the hose down the street or storm drain, and drain.

How do I get rid of green algae in my above ground pool?

So if your pool is very green. Especially if you can't see the bottom you definitely want to use an algaecide it's going to really speed this process up.


How do you clean a pool that has been sitting?

1. You can use a leaf bagger and leaf nets to remove almost ninety-nine percent of the organic debris. …
2. Treat water to balance alkalinity, pH, and stabilizer.
3. Shock your pool until you find the water in blue-grey color. …
4. You can also run a filter for 24/7 to clean the water.

What happens if you leave a pool empty?

The Problem With An Empty Pool



When that amount of weight and pressure is removed from the structure, the pool can actually pop out of the ground due to ground pressure forcing it up. This can compromise its structural integrity, damaging the walls, floor, liners, and even the deck itself.

Can you vacuum algae out of a pool?

1. Vacuum green algae through the Waste Method (Easiest and Safest for Equipment) The easiest way to eliminate the algae that has settled on the bottom of your pool is to bypass the filter and vacuum from the pool to waste.

How do you clear up a green pool fast?

Follow the below steps to clear up your green pool in 24 hours:

1. Test the pool water.
2. Balance your chemicals and PH accordingly.
3. Remove any debris.
4. Shock the pool.
5. Brush the pool.
6. Vacuum the pool.
7. Run the pump for continually for 24 hours.




What naturally kills algae?

Grab a brush and some baking soda. Bicarbonate, the active ingredient in baking soda, is an effective spot treatment to help kill the algae and loosen it from the wall. Make sure you really get every last particle free; black algae has particularly long and stubborn roots which makes it a persistent strand.

Can I use baking soda to get rid of algae in pool?

You can use baking soda as an effective spot treatment for black or brown algae spots. You just broadcast some of it in the area of your swimming pool that has the algae spots. Then you simply take your pool brush and scrub the area with the algae until it comes off.

What will dissolve algae?

Household Bleach



Chlorine bleach will rapidly kill and dissolve algae.

Why is there so much algae in my pool?

Causes of Algae in Pools



In short, algae are always in the pool, and can bloom into a visible colony when conditions are right: Poor water circulation; low flow or dead spots in the pool. Poor water balance; pH, Alkalinity, Calcium and Cyanuric levels. Poor water sanitation; low or inconsistent chlorine levels.

How do you open a green above ground pool?

Make sure the pH is normal or a little low.

1. Add liquid chlorine. Don’t buy your chorine at Walmart or Home Depot. …
2. Run the pool pump for 12 hours a day. Running the pump/filter for 12 hours will allow the dead algae to settle on the bottom of the pool so you can then complete step five more effectively.




How long does it take to clear algae in pool?

A fiberglass pool in its worst condition can be algae-free in 24 hours. For a vinyl liner pool, the process can take 3-4 days. For a concrete pool, this can take a week or more.

How do you clean a green pool without a pump?

4 Ways to Keep the Pool Clear Without the Pump

1. 1) Remove Debris. It doesn’t take long for organic material and debris to begin collecting in the pool. …
2. 2) Sanitize. Chlorine keeps a pool clean, clear, sanitized and safe. …
3. 3) Prevent Algae. …
4. 4) Agitate and Circulate.




How do I clean the bottom of my pool without a pump?

A nylon or rubber brush is the correct choice for scrubbing the sides of a soft-sided above-ground pool. A large pool brush makes quick work of the job, but you may need a smaller brush to clean corners. Once the particles have been removed from the sides of the pool, turn your filter back on and agitate the water.

How long can pool water sit without chemicals?

Without Chemicals



This should occur within 24 hours. That means the parents must go through the hassle of filling the pool with fresh water each day. This is not a good use of water. The reason the water must be drained daily is that algae and bacteria are quick to grow in stagnant water.

How do you clean a green pool with bleach?

Add the bleach to the pool at night, because it quickly gets degraded by sunlight. Pour it into the water as you walk around the perimeter of the pool, and then circulate the water for six to eight hours. By morning, the algae should be dead — but instead of being green, the water may be cloudy.

Can I use Clorox bleach in my above ground pool?

For your pool. Water. Basically the Clorox bleach is about half the strength of your liquid chlorine that you would find in your local pool store I this hosta brand is actually 12.5.


Can I pour regular bleach in my pool?

Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine. Household bleaches often have unwanted fragrances and colors.

Can I use bleach to shock my above ground pool?

Bleach is safe and the only chemical you should be using in your pool unless cleaning pool tile with baking soda. So yes, you can use bleach to keep your pool water chemistry balanced.

What is the difference between pool shock and bleach?

Swimming pool shock contains 12.5% sodium hypochlorite (bleach) vs. 6-8.5% for Clorox (bleach). Some Clorox products go as high as 8.5%. At a 12.5% concentrate, liquid pool shock is approximately 2x’s stronger than Clorox bleach.

How many gallons of Clorox Do you need to shock a pool?

If you need to calculate how much bleach or Clorox you need to shock your pool, you will have to use 1/2 gallon of bleach per 10,000 gallons of water to raise the chlorine levels by 5 ppm.