Nederlands | English | Deutsch | Türkçe

Project Sports

Questions and answers about sports

How can I add full fenders to a frame with no braze-ons?

5 min read

Asked by: Andrea Martin

How do you mount fenders without eyelets?

Coach Fred Matheny Replies: Use zip ties! Simply zip tie the fender struts to the dropout. Use some tape to avoid scratching the paint. You also can use zip ties to attach the fender to the rear brake bridge and chainstay bridge, dispensing with the metal clips that come standard on most fender sets.

Can fenders be added to any bike?

Because bikes differ in design, size, and frame, bolt-on bike fenders don’t fit all kinds of bikes. Before choosing a set of fenders, you need to take some measurements of your bike, specifically the tire radius and width, and frame clearance. You can check the tire radius and width on the side of the tires.

Can you add braze ons to bike frame?

Quote from video: So all these little pieces go on the frame. And you can raise them on so brazing. Happens where you use an oxy acetylene torch. And you heat up the frame.

Why are there no fenders on bikes?

Even in dry climates, fenders will block spray from run-off or spills, and stop pebbles from damaging your frame. Avoid fenders off-road because of the risk of trapping debris against the wheel. Most also lack clearance for mud or snow.

How do you fit mudguards to a bike without eyelets?

Quote from video: Here's a quick tip if you want to fit full mudguards onto a bike it doesn't have my guide eyelets. You can use one of these it's basically just a P clip. The dead cheap you can pick them up.

Are bike fenders worth it?

You should probably consider adding fenders to your bike if:

You ride in the rain. You ride in the winter (fenders help keep road sand and salt off your clothing). You’re a weatherizing enthusiast. You’re not planning on carrying a change of shoes, socks, and pants with you.

How do you make a bike fender at home?

Quote from video: Just run to the recycle bin and you don't have any money or time tear a piece of cardboard off of an old 18 pack or a 12 pack choo-choo choo-choo choo-choo run back to your bike.

How do you install dry tech fenders?

Quote from video: Using the leather washers mount the strut to the front fender. Now place the over fender mount plate over the strut. Place the silver plate on the underside of the fender.

What are Brazons on a bike?

A braze-on is the name for any number of parts of a bicycle that have been permanently attached to the frame. The term “braze-on” comes from when these parts would have been brazed on to steel frame bicycles.

How do I put a water bottle cage on my bike without holes?

Installing Water Bottle Cage on Bike without Holes

  1. By Using Zip Tie. Using the zip ties is probably the easiest and the cheapest way to attached the water bottle cage to your bike. …
  2. By Using Hose Clamps. …
  3. By Using Straps. …
  4. By Using Electrical Tape.

Where should I put my bottle cage on my bike?

Quote from video: And then attaching your allen key just like that to the top bolt. And then simply and gently.

How do you fit mudguards on a road bike?

Quote from video: Next fit the short bracket to the rear guard extension. Like this thread this part around the seat stay and up over the rear wheel lining the two prongs up with the rear guard.

How do you fit mudguards on a mountain bike?

Quote from video: And also straight otherwise your mud guard will end up lopsided. Once it's in position start tightening the bolt until it has expanded and grips inside the steerer.

Can you put fenders on a mountain bike?

Mountain bike fenders are often called mudguards; they provide more tire clearance and are designed to be compatible with suspension mountain bikes. Front mudguards are typically easy to install with zip ties and attached to your front fork.

What size fenders do I need for my bike?

The basic rule in fender fitting is that the fender should be at least 8mm wider than the tire; 10-12 mm is better. So if you’re running 32mm or 1 1/4″ (for 27″) tires, get 45mm fenders. If you’re running 42mm tires, get 50 or 52mm Fenders.

How do you install fenders on a disc brake bike?

Quote from video: If installing on domani disc models install the seat Staybridge adapter install the top of the fender to the brake arch or sea state bridge adapter.

Do you need fenders on a motorcycle?

A motorcycle only needs a front fender if your state’s laws require it (which is rare) or if the front fender is used as a brace to stop your front forks from twisting. If it’s used as a brace and you still want to remove it then aftermarket low profile front fenders are sold online that are hardly visible.

Is it illegal to have no front fender on motorcycle?

It is legal to remove it.

Do motorcycles need rear fenders?

They safeguard you and your motorcycle, especially on the long and rough routes. As someone with an inherent love for motorcycles, fenders are a must-have for their safety and efficiency!