Can toggle bolts hold a TV?

Asked by: Shawna Downey

A toggle anchor or a toggle bolt is a great way to hang a TV without studs. You’ll need to use a hollow wall anchor that looks similar to a regular screw, with a butterfly toggle at the end. Once you’ve placed them in the wall, they’ll attach to the back.

Can you mount a TV on drywall with toggle bolts?

Toggle bolts, especially snap toggle bolts, are effective when mounting a TV to drywall. Make sure you check the load capacity for each bolt, and use the correct number. If your wall seems flimsy, it’s safer to drill directly into the studs and secure the mount with lag bolts.

How much weight can toggle bolts hold?

Toggle bolts are the types of drywall anchors that can support up to 50 pounds, while steel hollow-wall anchors have a drywall anchors weight limit of up to 100 pounds.

What size toggle bolt do I need for TV mount?

A traditional toggle bolt with a 1/8-inch-diameter screw will support approximately 50 pounds in 1/2-inch drywall, a Snaptoggle with a 1/4-inch-diameter screw can support an impressive 265 pounds in 1/2-inch drywall.

How do you mount a TV to toggle bolts?

Drill a one-half inch hole and insert the toggle. Pull it tight to the back of the drywall. Push the flange flush with the front of the wall. Then put up the bracket. Put the bolt with the washer.

How much weight can 3 toggle bolts hold?

Mounted onto 3/8-inch wallboard, it can support up to 30 pounds. On 3/4-inch wallboard, it can support up to 55 pounds.

Can you over tighten toggle bolts?

Use your fingers to tighten the bolt, then finish with a screwdriver. Be careful not to over-tighten the bolt, or you could crack the plaster.

Can you hang a 65 inch TV on drywall?

For 65 inch televisions mounted on drywall, we recommend only mounting the bracket to the studs inside the wall.

Can I put a 50 inch TV on a plasterboard wall?

Many people ask the question “Can I put TV on a plasterboard wall?” The answer is yes you can fix a TV to a plasterboard wall. Hanging a TV on a plasterboard wall is possible even if the TV is very large and heavy.

Can you mount a 70 inch TV on drywall?

That includes almost any size TV under 100lbs. So bring on your 55″, 70″, or even 77″ TV. You’ll be able to safely and securely mount them to the wall with the Echogear Drywall TV Mount.

Is drywall strong enough to hold a TV?

Even though a drywall can support a TV up to 100 lbs, the device is still brittle and the mount can require additional support, or else the TV will land on the floor. Wall studs make up the frame for the TV that supports your walls. They provide a sturdy anchor point, ensuring that both the mount and TV stay in place.

Can you hang a 75 inch TV on drywall?

Is it safe to mount your 65 inch, 75 inch or larger TV on the wall? The answer to this is yes, you can mount your XL TV on the wall. Safety is paramount, of course.

How much weight can a drywall anchor hold?

An anchor provides extra support to hold weight in drywall. It is laid against the wall and the screw is driven in to hold it in place. Each anchor package will state the weight limit so choose the one that fits what you need. A lighter picture, 5 to 20 pounds can use an anchor, as well as one that is over 20 pounds.

Can I use wall anchors to mount a TV?

You must screw into studs when mounting a TV on the wall. Do not use hollow-wall anchors, as they cannot support the weight of TV wall mount brackets and the television.

How much weight can toggle bolts hold on drywall?

Toggle bolts (butterfly anchors) – For serious holding power, these are your best bet. While the holding power of plastic toggles stops at around 20 pounds, metal toggles can hold up to 100 pounds on walls.

What is the strongest drywall anchor?

And it's set out like the metal drywall anchor that we tested first you press the tip of the snap screw anchor into the drywall.

Are drywall anchors worth it?

“Because drywall is too weak to hang things from, a drywall anchor is necessary,” explains Matt Michaels, a spokesman for Lowe’s Home Improvement in Charlotte, NC. The anchor essentially allows you to insert screws into the wall without causing the soft drywall to crumble around it.

Can I use concrete anchors in drywall?

It’s because those plastic anchors aren’t really meant for drywall. They’re actually meant for solid walls like concrete. They *can* in certain circumstances be used for drywall but even the must robust plastic anchor can only hold around 10 pounds.

How much weight can a molly bolt hold in drywall?

25 pounds to 50 pounds

Molly Bolts



These are not as easy to use as other drywall anchors, but they’re still good to have on hand for medium (10 pounds to 25 pounds) to heavy loads (25 pounds to 50 pounds).

How much weight can a stud hold for TV?

Zach Eyman: “A good rule of thumb is 80 pounds for a single stud, but a specific mount’s specifications should always be followed.” Eighty pounds, as we’ll see later, is pretty much everything below 60 inches.

How much weight can drywall hold without stud?

How much weight can drywall hold without a stud? Typically around 20 pounds. For heavy items, you may need to double up or hang from a stud. With a cheap plastic wall anchor, like the ones most products include in the box, drywall can hold about 20 pounds.

How much weight can a 3/16 Molly Bolt hold?

OVERVIEW. Strongest and most secure of all hollow-wall anchors. Holds up to two times more than wing toggles of the same bolt diameter: up to 802 Lbs. in concrete block and up to 238 Lbs.

What is the strongest toggle bolt?

Traditional metal toggle bolts are the strongest of the bunch, but they’re not the simplest to install because they require drilling a hole that’s approximately three times wider than the diameter of the bolt (necessary to insert the anchor).

How tight should toggle bolts be?

You can get it exactly the way you want it. And then snug it up just to touch.