Why does Shimano Nexus 3 internal gear feel differnt on 2nd gear with and without the pin and gear set up

Asked by: Mike Pomeroy

How do you adjust Shimano hub gears?

Quote from video: As you twist this knob to tighten or to loosen the cable you can move the alignment of the two yellow lines. So as you do this you'll have to look at the two yellow lines.

How does a Shimano 3 speed hub work?

Quote from video: We pull on the indicator. Until the end of the rod is even with the end of the axle. And now the ratchets are engaging. Okay so we're driving the hub shell at a one-to-one with the cog.

How do I adjust my internal hubs?

Quote from video: If i wanted to move away from the hub i turn this clockwise in this case i want it to move in towards the hub. So i'm going to turn this counterclockwise.

How does Shimano Alfine hub work?

Quote from video: The sleeves rotation raises the control palm. The front gear remains fixed while the planetary gear is routed around it driving the ring gear. Here you can see how force is transmitted to the hub.

Is a 3-speed bike good for hills?

Q: Is a 3-speed bike good for hills? Yes, a 3-speed bicycle is a great choice if you’re riding a route with hills. The different gear options will allow you to adjust for inclines, downhill rides, and regular flat terrain.

How do you fix 3-speed bike gears?

Quote from video: So just go back to third gear. And what you want to do is tighten this cable up. So very simple to do just use your fingers. And just tighten this bounder juster here.

How do internal gear hubs work?

An interlocking set of gears, called a planetary system, helps you ride up a hill—or go faster on a flat. Depending on the gear, the driver unit either first spins outer ring gears, or the planetary gears deeper in the hub, rotating around sun gears near the center.

How do I remove the internal Shimano Nexus 3 speed shifter?

Quote from video: It has a little screw back here that you just need to remove and then the system will pop right off to remove that just take any kind of wrench. And. Once it's locked on twist it towards the bicycle.

How do I adjust Shimano speed hub on Nexus 8?

Quote from video: You'll see an inline barrel adjuster adjust that usually you simply need to turn it anti-clockwise eternal sights this shortens the inner cable.

Is 3 speed internal hub enough?

A 3-speed with an internal hub is a good option. You don’t consider yourself a pro. Because a 3-speed can shift even at a stop, and the shifting requires less cable pull, the cables will not only last longer but are less likely to give you trouble when shifting.

How do you ride a 3-speed bike?

Quote from video: If you want to go from first to ninth shift here first then shift up once here. That's going to create less torque on the chain. It's going to be a smoother ride. Easy to easier to shift.

What gear should I use on a flat road?

Quote from video: Похожие запросы

How do I install a 3 speed hub?

Quote from video: You just loosen it up a little bit over here and over here and eventually over time you can find all your high and low spots and the wheel is round once again then after you get the real round.

How does Shimano Nexus work?

Quote from video: And meshes with the planetary gears in order to function one of these units must be the input or the means by which the power is delivered into the assembly an output.

How does a bicycle hub work?

Firstly, the hub provides an anchor point for the spokes and holds the bearings in place so the wheel can spin. Secondly, the rear hub holds the cassette or sprocket which transmits the forces from pedalling via the hub body to the spokes ultimately propelling the rider forward.

How does a hub gear work?

While derailleurs need regular chain care and occasional adjustment, hub gears tend to run and run without any cossetting. Gear shifting goes on inside the hub shell, where small pinions mesh together to rotate the rear wheel at a different speed from the sprocket.

How long do hub gears last?

People routinely get over 100,000 km out of Rohloff Speedhubs. I have heard of Sturmey Archer hubs from the 50s still in use. Even lower cost Shimano Nexus or Alfine hubs can go 15,000 km before they need to be replaced. For the average cyclist, a quality internal gear hub lasts a lifetime if properly maintained.

Are hub gears good?

Generally, hub gears have a long-life span and are usually maintenance free. The advantage of a hub gear is that you can shift gears when stationary. Hub gears allow you to change the gears from top to bottom whilst motionless, which is useful for urban riders who want to change gears at traffic lights.