Nederlands | English | Deutsch | Türkçe | Tiếng Việt

Project Sports

Questions and answers about sports

Where is the saddle on a ukulele?

7 min read

Asked by: Dwight Senn

Saddle: The saddle sits on top of the bridge and hold the strings in place at the body of the ukulele (like the nut at the neck). The saddle holds the strings in place at the body and is raised to keep the strings the proper distance from the fretboard.

Does a ukulele need a saddle?

The vast majority of ukuleles will come with a removeable saddle at the bridge end of the strings, and that is removable for a reason. It’s the white strip, usually made of bone or plastic, sitting in the bridge mounting over which the tail end of the strings sits before being tied off.

How do you adjust a ukulele saddle?

Adjusting The Action On Your Ukulele

  1. Step 1 – Measure the action. …
  2. Step 2 – Remove the saddle. …
  3. Step 3 – Put a marker on the saddle. …
  4. Step 4 – Get sanding/filing. …
  5. Step 5 – Slide the saddle back into place and tighten strings. …
  6. 30 thoughts on “Adjusting The Action On Your Ukulele”


What are 5 parts of a ukulele?

Parts of the ukulele

  • Body. the body of the uke is the soundboard, which allows to amplify the strings vibration. …
  • Neck. The neck is usually glued to the body. …
  • Tuners. Tuners are a mechanical parts used to tighten the strings. …
  • The bridge. The bridge is a part that’s glued to the top soundboard.


What is the order of ukulele strings from top to bottom?

Ukulele String Numbers



The string that’s closest to the floor is string number one, The second string that’s one up from the floor is number two, The third string that’s three up from the floor is string number three, The fourth string that is fourth up from the floor (or nearest the ceiling) is string number four.

What do the dots on the side of A ukulele mean?


Hi everybody what are those little dots on the ukulele for. Well these little dots are used as kind of a quick reference to help you find where you're at on the ukulele. Now different makers of

How high should the action be on A ukulele?

2.5mm to 3.0mm

Depending on the ukulele, we like to set the action at 2.5mm to 3.0mm in height. This is the distance between the strings and the 12th fret. If the strings are too high, the instrument becomes uncomfortable to play, if the strings are too low, it can cause fret buzz.

How do I know if my ukulele action is too high?

Here required you would take the saddle down by two millimeters. And we're going to pause the video repoint. Again try and tear the saddle AB and show you what I'd do with it. Keep watching. And low

What is a compensated saddle on a ukulele?

A compensated saddle includes ‘grooves’ or ‘notches’ where the high E, B and G strings rest. This adjusts the length of the string ‘compensating’ for accurate ‘intonation’ so the guitar sounds in tune with notes played higher up the fretboard.

Does a ukulele need a truss rod?

Ukuleles typically don’t need truss rods, especially small soprano and concert ukuleles, which are the most popular sizes. The tension of the plastic strings and the size of these ukulele’s necks, simply don’t require the reinforcement and adjustability a truss rod provides.

Where does the thickest string go on A ukulele?

Generally speaking, the thickness of ukulele strings follow this order, from thickest to thinnest:

  • C string (2nd closest to the ceiling)
  • E string (3rd closest to the ceiling)
  • G string (1st closest to the ceiling)
  • A string (4th closest to the ceiling)


How do you remember the string order on A ukulele?

Placing your ukulele in your right hand, you need to start from the closest string to your chin. Move in the direction of your toes and the names of the strings in this order are G, C, E and A. A simple way to remember the order of ukulele strings is to use the acronym Good Charlie Eats a Lot.

How do you remember ukulele strings?

An easy way to remember the ukulele string names is to commit to memorize the acronym, “Good Charlie Eats A lot.” The first letter of each word stands for a ukulele string name, so as long as you remember the acronym, you will know the string names and their order forevermore!

What is a compensated saddle on a uke?

A compensated saddle includes ‘grooves’ or ‘notches’ where the high E, B and G strings rest. This adjusts the length of the string ‘compensating’ for accurate ‘intonation’ so the guitar sounds in tune with notes played higher up the fretboard.

How do you make a ukulele nut?

So I just ended up using some some hard wood that's that's a cherry wood I believe. That's made out of and you know I just just glued on there I just cut some slits for the strings.

What is a bone nut?

Bone nuts are much harder and denser than regular plastic nuts. This means they help transfer sound vibrations better – causing longer sustain and improved tone (vibrations are not absorbed). On the other hand, plastic nuts are softer and hollow. They absorb lots of sound vibrations – making your guitar sound dull.

How do you put a strap button on a ukulele?

You attach your strap on one end here now what you do with the other end. You can screw a strap button into here on the side of the hill.

How do you make a nut out of a blank?

I'm using calipers to measure the nut slot. And my nut at three different points and it's looking like my blank is just slightly too thick. So once again I'll use some sandpaper.

How do you make a bass nut?

Making a Nut, Step-by-Step

  1. Clean the nut slot. Scrape out old glue residue, and make the slot square and clean without removing wood. …
  2. Choose your nut material. …
  3. Roughly shape the nut. …
  4. Lay out the spacing. …
  5. Cut starter slots. …
  6. Remove the nut to protect the guitar. …
  7. Final slot height. …
  8. Mark the final size.

How do you radius a bone nut?

It's really easy to tip the file one way or another. And to make this ledge uneven and not a square. Here's another technique I see a lot of people use and they'll put a piece of adhesive.

How do you install a bone nut?

Press it in Center it up as you can see it's slightly long on either side we're gonna use the mechanical pencil to mark a line so we can make those adjustments for a perfect fit flip the guitar.

Are guitar nuts glued on?

Is it necessary to glue a guitar nut in place? Gluing the nut is not completely necessary, the pressure of the strings and the friction between the nut and neck will hold it in place. However, you can use a few drops of white wood glue to fix it in place to prevent it falling off when changing strings.

What is a guitar bridge?

A bridge is a device that supports the strings on a stringed musical instrument and transmits the vibration of those strings to another structural component of the instrument—typically a soundboard, such as the top of a guitar or violin—which transfers the sound to the surrounding air.

Where is the saddle on a guitar?

The saddle sits directly in front of the bridge pins on an acoustic guitar. The position of the saddle affects: Intonation (the guitar’s ability to play in tune) Action (string height above frets)

Which way does the saddle go?

The simple math of fret scales suggests that the saddle should be placed exactly twice as far from the nut as the 12th fret. However, because strings are not perfectly flexible, and because that imperfection varies from string to string, the saddle needs to be moved away from that theoretical point.

Which is the bridge and which is the saddle?

On the flat top guitar, the bridge is the big wooden (usually ebony or rosewood) part that holds the strings via holes in back side, or with bridge pins. The saddle is the small structure against which the strings bear, an through which they conduct their vibrating energy.

What is a saddle used for?

A saddle is a seat for the rider of an animal, usually a horse. A well-made saddle gives the horse rider the necessary support, security, and control over the animal. The saddle makes it possible for the rider to keep in balance with the horse by allowing him or her to sit over the horse’s point of balance.

What is saddle in guitar?

A guitar saddle is designed to transfer the vibrations through the bridge into the top wood of the guitar. This quick and simple upgrade will have an amazing affect on your instruments tone, harmonic content, and playability.

What is another word for saddle?

Saddle Synonyms – WordHippo Thesaurus.



What is another word for saddle?

howdah packsaddle
pillion seat