What size nut fits a 15mm socket? - Project Sports
Nederlands | English | Deutsch | Türkçe | Tiếng Việt

Project Sports

Questions and answers about sports

What size nut fits a 15mm socket?

4 min read

Asked by: Stephen Bonnet

The standard wrenches needed are: 11,13,15,17,19,22,24,27,30,32,36mm. I believe that the bold that goes with the 15mm wrench is normally an M8. M8s usually use 12 or 13mm heads.

What size is 15 mm socket?

SAE to Metric Conversion Chart

SAE Metric Inch
17/32″ 0.531
14mm 0.551
9/16″ 0.563
15mm 0.591

How do you size a socket to a nut?

The length you’ll need will be determined by your working environment. For screws in deep holes, a deep socket will be your best option. S indicates the target size of the nut, which determines which socket you’ll need. For example, you’ll require a 5mm socket for a 5mm nut.

Whats the same as 15mm?

Smaller items are usually measured in milimeters as it is a more accurate measurement.

MM Approximate Size In Inches Exact Size In Inches
14mm 9/16 Inch 0.55118 Inches
15mm Just short of 5/8 Inch 0.59055 Inches
16mm 5/8 Inch 0.62992 Inches
17mm Just short of 11/16 Inch 0.66929 Inches

What size socket fits an M10 bolt?

FLAT HEAD SOCKET CAP SCREW – METRIC

Size Head Diameter Hexagon Socket Size
M6-1.0 13.44 4.00
M8-1.25 17.92 5.00
M10-1.50 22.40 6.00
M12-1.75 26.88 8.00

What size bolt does a 15/16 nut fit?

Hex Bolt, Lag Bolt, Square Bolt and Heavy Hex Bolt.

US Bolts
Bolt Diameter (in) Head and Wrench Size (in)
1/2 3/4 7/8
9/16 13/16
5/8 15/16 1 1/16

What size metric bolt has a 14mm head?

Metric Bolt Head/Wrench Size

Bolt Diameter (mm) Head/Wrench Size (mm)
ANSI/ISO JIS
10 16 14
12 18 17
14 21 19

What size bolt has a 16mm head?

Metric Shoulder Bolt Dimensions

Shoulder Diameter (A) Thread (C) Head Diameter (E)
8mm 6mm x 1.0 13mm
10mm 8mm x 1.25 16mm
12mm 10mm x 1.5 18mm
16mm 12mm x 1.75 24mm

What size metric bolt has a 13mm head?

Confirm – Metric 13mm is an 8mm shank.

What is 16mm in standard?

Metric / Standard Wrench Conversion Chart

Bolt Diameter Metric Standard
7/16″ 16mm 5/8″
1/2″ 19mm 3/4″
9/16″ 21mm 13/16″
22mm 7/8″

Why is there no 16mm wrench?

1911, is there a reason they don’t use any 16MM nuts or bolts? 16mm and 18mm nuts / bolts are most commonly found on American vehicles that converted to metric hardware, and not import vehicles designed with metric hardware. So, you don’t find them in most basic wrench / socket sets.

What fraction is 16mm inches?

5/8 inch

16mm = 5/8 inch.

What’s equivalent to a 13 mm socket?

Standard / Metric Wrench Conversion Chart

Bolt Diameter Standard Metric
1/4″ 7/16″ 11mm
5/16″ 1/2″ 13mm
3/8″ 9/16″ 14mm
7/16″ 5/8″ 16mm

Is there a 13 mm socket?

Capri Tools 13 mm Universal Impact Socket, 3/8-Inch Drive, 6-Point, Metric.

What is a 15/16 socket in MM?

STANDARD / METRIC WRENCH CONVERSION CHART

BOLT DIAMETER STANDARD METRIC
1/2″ 3/4″ 19mm
9/16″ 13/16″ 21mm
7/8″ 22mm
5/8″ 15/16″ 24mm

Will a 9/16 fit a 14mm?

But thats no biggie ~ to answer your question, 9/16 SAE is actually 14.3 Metric, but it is the closest SAE size that will fit a 14mm metric head. Hope that helps!

Is 21mm the same as 13 16?

21 mm is . 826″, 13/16 is . 812″ . If you are getting a 13/16 socket on those, it’s a pretty sloppy socket.

Are Toyota lug nuts metric?

Every nut and bolt on the Toyota is metric

What size are 4runner lug nuts?

The lug nuts on a 2019 toyota 4runner have a thread size of 12mm x 1.50 And a hex size of 21 mm.

How do you measure lug nut size?

Check the thread size for a lug nut. Refer to the vehicle owner’s manual for thread dimensions; measure the width of threads on the lug bolt with measuring tape, or bring the nut to a hardware store and twist it around the thread pitch gauge or compare it to loose bolts with marked sizes.

Are lug nuts all the same size?

The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.

How do I know what lug nuts to use?

You can easily identify your thread size and pitch with a simple thread pitch gauge available at any hardware store, or you can simply take one of your lug nuts to your local hardware store and spin it onto the bolts they have on hand.