What is the standard width of a farmhouse table?

Asked by: Elizabeth Green

36”- 42”36”- 42”.

What is a good width for a table?

Most rectangular tables are between 36″ and 40″ wide. A table that seats four should be about 48″ long. To seat four to six people, look for a table that is at least 60″ long. For six to eight guests, your table should be at least 78″ long.

Is 48 too wide for a table?

Table Width. Most dining tables are between 36″-48″ wide, depending on the length of the table, which leaves room for place settings and serving pieces. Keep in mind that dining tables wider than 48″ will be more difficult to reach across.

What is considered a farmhouse table?

What Is A Farmhouse Table? A farmhouse table should always bring a touch of nature and a rustic feel to any room. They usually come with a chunky wood top made of solid planks such as oak or pine and often have sturdy wooden spindle legs.

What makes a table a farmhouse table?

The secret to creating an authentic farmhouse-style table is giving it a sturdy and solid base. Something like this would definitely look nice. The design is a bit more complicated than that of a typical 4 legged table but at the same time it has more character.

Is 36 too narrow for dining table?

The minimum width of a table should be 36″ – any less width and you will have difficulty placing serving pieces in the middle of the table. If space allows, base your size table on the number of persons you usually have for dinner then add two. That should accommodate a normal number of guests.

Is 30 inches wide enough for a dining table?

Therefore, 30 inches is the minimum comfortable width for a dining table. A 30-inch-wide dining table accommodates plates and drinks for two people facing each other, but it does not leave a lot of room in the middle for condiments and other shared items or serving dishes.

How wide is average dining table?

36-40 inches

Most dining tables are made according to standard measurements. The standard width is 36-40 inches while standard height is 29-31 inches. The length varies depending on how many people the table sits. The seating number varies due to the differences in leg layout of the table and chair sizes.

What is the minimum width for a kitchen table?

The minimum width of a table for reaching across to pass a dish is 48 inches. Dining table height is 28 to 30 inches. This measurement is pretty standard across the industry since it’s a matter of function. Knees have to fit under the table, so there needs to be enough clearance for people to dine comfortably.

How wide should a 7 foot dining table be?

Circular Dining

How much does it cost to build a farmhouse table?

Building a farmhouse table is a relatively easy project that will take about one weekend and cost less than $200.

How do you make a farm style table?

And four by fours turn it into a table looking like this and finally after you seal it it will turn into a beautiful rustic farm style table and for your complete list of instructions.

What is the standard height of a farm table?

between 28 and 30 inches

Standard height dining tables, sometimes called regular height dining tables, sit between 28 and 30 inches and should be used with 18 to 23 inch chairs, stools or benches.

How much space do you need for a 6 person dining table?

A 6 person dining table should be at least 78″ long. That’s 6 feet 6 inches. The rule of thumb is to allow 24″ of space per seat at your dining table for casual seating. For more formal meals, you should allow 30″ per seat which still works with a 78″ table.

How much space do you need around a dining table?

The general rule of thumb is to allow 24 inches of space for every person gathered around your table. Most side chairs range between 16” wide and 24” wide, with arm chairs being as wide as 30”.

What is apron height on a table?

Entry Tables



Apron height of 2″-3″ is typical.

How much should a farmhouse table overhang?

Here’s the hard math: With a farmhouse table the top overhangs approx. 2″ on each end, the apron is approx. 1.5″ thick on each end, and each leg is approx. 3.5″ thick.

How much overhang should a table top have?

The overhang of a table is simply how much the table top projects out beyond the legs or base of the table. Too little of an overhang can make a table look stubby, while too much can make it look almost precarious! Table top overhangs of 2 to 4 inches are quite standard, and give a proportional look to the table.

Is a table apron necessary?

You can ignore the aesthetic function if you choose, but if you want your table to last you have to consider the structural functions. For example, without aprons to support the width of the table, the joints between the boards in the top would experience much more stress than they do in a regular table.

How deep should an apron be?

Assuming a chair seat is about 16 inches off the floor, a rule of thumb on the distance from the bottom of the apron to the floor is 24 inches, Rockler says.

Where should an apron sit?

How do they help the kitchen or dining room table do its job? Table aprons, (also called table skirts or skirting) are wood extensions that sit right below the surface of the table. Picture your table top and the part that hangs down from it. This is the table’s “apron” or “skirt.” Aprons can range from 1 ½” to 3”.

What does a table apron do?

Hardwood Aprons or Skirting on Tables & Chairs



An apron, also called the “skirt” or “skirting”, is simply the portion of the table or chair that is vertically positioned beneath the table top or seat. This hides any corner blocks, bracing, self-storing, or other mechanical pieces (on tables) from plain view.

What is the bottom of table legs called?

LEG CAP metal legs are also called sabots. They are a detail for the bottom of chairs or table legs and also protect the wood from damage.

What is the bottom of a table called?

foot – the bottom part of the leg which touches the floor. A table may have completely straight legs with no distinct knee or foot.

What is the piece of wood between chair legs called?

apron – the strips that run between the legs and connects to the surface (seat) arm or armrest – part that supports your elbow and forearm. arm support – generalized term for the upright piece which supports the arm. back rail – rails specific to the seat back. back upright – synonym for “stile”

What is the back of a dining room chair called?

Backrest: The backrest is the chair back, which supports the posture of the person seated in the chair.

What is a chair splat?

The splat refers to the vertical central element of the chair back, and can be very simple or extremely decorative. Often incorporating the themes of different furniture periods, there are a variety of splat back chairs with English, French, Gothic, and Chinese details.