What is the average cost to fill in a pool?
5 min read
Asked by: Katie Lynn
$4,000 – $16,000 Inground Pool. The average cost to fill in an inground pool is $4,000 to $16,000 for full demolition or $2,000 to $10,000 to fill in with dirt. An above ground pool removal costs $300 to $800, or $2,500 with a deck.
How much does it cost to fill a 30 000 gallon pool?
Depending on the size of your pool, you may need three to six truckloads to fill it, which means you could pay anywhere from $525 to $2000 total to have pool water delivered. The average pool in the United States holds 15,000 to 30,000 gallons of water.
How much does it cost to fill a 20000 gallon pool?
If you don’t trust your well, it will cost about $400 to fill a 20,000 gallon pool using a good water company that will deliver drinking water. Be careful, some water delivery people will back up to a local pond to fill up.
How much does it cost to fill a 10000 gallon pool?
Filling’s easy. If you have any form of town water, use that. To get the exact cost, call the water company, give them the amount of gallons, and they’ll tell you. Generally, a 10,000 gallon pool holds about $25 worth of water.
How often is normal to fill a pool?
Pool industry experts recommend you drain your pool and refill it every five to seven years. No two pools are alike, so there is no set number at which you must drain your pool.
How do you fill an unwanted inground pool?
How to fill in an inground swimming pool:
- Power off the pool by disconnecting the breaker box.
- Drain the pool.
- Drill holes at the bottom of the pool to prevent water collection.
- Demolish side walls. …
- Backfill and compact. …
- Finish with soil & sod.
How do you decommission a swimming pool?
How it’s done: Filling in a pool involves draining the pool, punching holes in the bottom, demolishing the top layer of the pool (18″ – 36″), placing the rubble in the bottom, filling in the pool with additional dirt and topsoil, and compacting the soil.
Will filling a pool drain my well?
Filling a pool with well water will not hurt the well’s pump as long as you don’t fill the pool in one go. Attempting to fill a pool in one go will put too much pressure on the well’s pump and cause it to burn out.
Should I drain and refill my pool?
Most in-ground pools will have to be drained and refilled at some point. But cleaning should not be the reason to do it. Pools will need to be drained and refilled every 5-7 years on average, or if there is a major necessary repair. Otherwise, avoid draining your pool if at all possible.
Can you use fire hydrant to fill pool?
Can I Use A Fire Hydrant To Fill My Pool? In terms of the question as it stands, yes, you could technically use a fire hydrant to fill a pool. That’s because technically it is possible to use a fire hydrant to pump large volumes of water quickly into a swimming pool.
How long does it take to fill a pool?
The average pool can take 12-24 hours to fill and that is only if you have a few hoses chugging away. When your family is chomping at the bit to dive in, that may as well be an eternity. Forget this plan if you are using well water, you will burn up your pump or leave your home without water for days.
What is the cheapest way to fill a pool with water?
What is the cheapest way to fill my pool? While it may not be the fastest way, using a garden hose and city tap water is the cheapest way to fill your swimming pool. The average American family uses 12,000 gallons of water per month. And the average-sized swimming pool is around 15,000 gallons.
Will the local fire department fill my pool?
Generally, fire departments will not fill a residential swimming pool. Filling the pool could be a potential liability, plus, the water the fire department uses for your pool isn’t putting out fires and saving lives.
How many gallons is my pool?
Length x width x depth x 7.5 = volume (in gallons)
Length times width gives the surface area of the pool. Multiplying that by the depth gives the volume in cubic feet. Since there are 7.5 gallons in each cubic foot, multiply the cubic feet of the pool by 7.5 to arrive at the volume of the pool, expressed in gallons.
How many gallons is 16×32 pool?
16×32, with the Intex advertized water depth of 46″, is 1963 cubic feet, which is 14,680 gallons.
How long does it take to fill a 15000 gallon pool with a hose?
It would take 31.25 hours to fill a 15,000 gallon swimming pool if your water pressure is 8 gallons per minute and your outside water hose is 480 gallons per hour.
What size is a 10000 gallon pool?
Common Pool Sizes and Its Capacity In Gallons
| Pool Size | US Gallons |
|---|---|
| 30 ft. Rnd | 21,240 |
| 12 ft x24 ft Oval | 6,400 |
| 15 ft x24 ft Oval | 8,000 |
| 15 ft x 30 ft Oval | 10,000 |
What’s considered a large pool?
The Pool’s Size and Purpose
For a lap pool, the average size is about 10 feet wide and 50 feet long, which is pretty large. However, the average size for a smaller in-ground pool can range from 10 feet by 20 feet, and a larger pool is about 20 feet by 40 feet.
What is the most common pool size?
The most common choice for swimming pool sizes is a pool that’s 18 feet by 36 feet.
How long will it take to fill a pool with a garden hose?
With a standard size 1/2 inch garden hose, it takes about 9 hours to fill a 5000-gallon pool. To figure the time needed yourself, multiple the number of gallons your pool holds by . 0018. The volume of water a standard hose can deliver per minute is approximately 9 gallons or 540 gallons in an hour.
How many square feet is an average pool?
600 square feet
Most average/mid-size pools are more than 600 square feet. Therefore, when we say “small,” we’re referring to pools that are 600 square feet or less.
