What is code for handrail height?

Asked by: Young Meza

between 34″ and 38″between 34″ and 38″, the handrail and the top of the guard can be one and the same. In commercial applications, the IBC requires a minimum height of 42″.

What should be the height of handrail?

(6) The height of handrails shall be not more than 37 inches (94 cm) nor less than 30 inches (76 cm) from the upper surface of the handrail to the surface of the tread, in line with the face of the riser at the forward edge of the tread.

What is the proper height for a handrail and How Is It measured?

Handrails should be no less than 34 inches above the stair or ramp and no more than 38 inches above. If you are working with alternating tread devices or ship ladders, you should measure above the tread nosings. The handrail should be between 30-34 inches above.

What is OSHA standard for handrail?

The top rail must be at least 42 inches in height (§1910.29(f)(1)(ii)(B)) and the handrail must be 30 to 38 inches in height (§1910.29(f)(1)(i)) (as measured at the leading edge of the stair tread to the top surface of the rail).

Where should a handrail start and stop?

Handrail height on the stairs should be no less than 34 inches and no greater than 38 inches. The way this is measured is to begin at the leading edge of the stair nosing and run an imaginary vertical line upward until it reaches the top of the railing.

How far apart should handrail brackets be placed?

36 to 48 inches apart

We recommend spacing the Brackets 36 to 48 inches apart. In most cases, it is desirable to transition the Handrail past the last stair with a horizontal rail of 6 to 12 inches. Some local codes require this extension be 12 inches. Contact your local authorities to confirm requirements.

Is handrail a code?

7.5. 1 The height of handrails shall be not more than 85 cm measured vertically above pitch line; a handrail is required for all stairs, or ramp having rise of more than 60 cm. 7.5.

Is a handrail a legal requirement?

Handrails are mandatory. Stairs should have a handrail on at least one side if they are less than one metre wide, and on both sides if wider than this. Handrails should be placed between 900mm and 1000mm above the highest point on the staircase steps.

Does it matter what side a handrail is on?

Standard construction rules do not specify which side of a railing should be installed in a residential project. As long as the handrail extends the whole length of the steps, it can be on either side of the stairs.

How many steps can you take without a handrail?

Building Codes
The building code does not refer to the number of “steps” but it does require a handrail when there are two or more “risers”. For clarification, a “riser” is the vertical portion of a stair. The “tread” is the top of a step. A two riser minimum would translate to two steps.

Do handrails have to be on both sides?

Handrails are required on both sides of stairs and must be continuous within the full length of each stair flight.

What is code for steps on decks?

Requirements for Deck Stairs
Treads must be at least 10 inches deep, measuring from front to back. Stair treads must sustain a weight of at least 300 pounds in an area no more than four inches square. The rise, or the vertical distance from one tread to the next, can be no more than 7 1/4 inches high.