What is causing this chain clicking noise? - Project Sports
Nederlands | English | Deutsch | Türkçe | Tiếng Việt

Project Sports

Questions and answers about sports

What is causing this chain clicking noise?

6 min read

Asked by: Anthony Soto

The clicking most likely means that your chain needs lubrication or your front derailleur requires a simple adjustment. Whether it is making noise or not, you should always check your drivetrain to ensure that it’s shifting quietly and efficiently before you ride. Check your chain.

Why is my chain making a clicking noise?

How to Fix a Clicking Chain. A clicking noise often comes from your chain wanting to jump up or down a gear on the rear cassette. This can typically be fixed by adjusting the tension of the cable that runs from your shifter to your rear derailleur.

How do you stop chains from making noise?

Keep your Chain Lubed and Clean and Re-grease Derailleur or Chain Guide Pulleys/Jockey Wheels. Consistent squeaking coming from your drivetrain could be a couple of different issues, but each involves making sure moving parts are well lubricated or greased.

Why does my bike chain click when I pedal hard?

The chain will rub against the derailleur only in some gears since it changes its angle as you shift gears. That’s why your bike makes a clicking noise when pedaling hard. So, you need to shift your bike into the gear where you hear the clicking.

How do I stop my gears from clicking?


Quote from video: Turn the outer limiting screw that's the one closest to you in maybe an eighth of a turn. Now we'll see if we can still shift. You can and that should eliminate the clicking clicking.

Can I use wd40 on my bike chain?

WD-40 is a great bike chain lube water based lubricant and will not only lubricate the chain well, but will also keep it rust and corrosion free. It also minimizes the accumulation of dirt which reduces the wear and tear of the chain.

Why does my bike make a clunking sound when I pedal?

Wheel Noises Only When Pedaling



Noises once-per-wheel-revolution that only occur when you are pedaling are most often related to the freewheel or Freehub. The freewheel or Freehub bearings may be loose, or the cassette may be loose on the Freehub body. See if you can wiggle the sprockets back and forth.

How do I know if my chain needs lube?

Your chain will tell you when it needs to be lubed. If it’s dry and squeaky when you’re riding, it’s time to lubricate. This is likely going to be after riding in heavy rain or if you’ve never ever oiled your chain.

What noise does a chain make?

a sharp, hard, nonresonant sound, like that produced by two pieces of metal striking, one against the other: the clank of chains; the clank of an iron gate slamming shut.

Should you oil a bike chain?

At a minimum, a rider should re-lube the chain prior to every ride, even if they are re-lubing over a dirty chain. For efficiency, it’s better to re-lube over a dirty chain than do nothing at all,” suggests Smith.

Why is my bike chain popping?

If it is popping OFF, theres a multitude of things that could be causing it, but the most common is a bent cog spike (the little teeth on the gear.) The latter can be a LITTLE expensive, but much cheaper than buying a new bike. Either way, one should always practice proper chain maintenance.

How often should a bike chain be replaced?

about every 2,000 to 3,000 miles

Most mechanics agree that you should replace your chain about every 2,000 to 3,000 miles, depending on your riding style. Many Tour De France riders wear out two or even three chains on their primary bike over the course of the three-week race.

How often should I lube my bike chain?

once every month

If you are a frequent rider, using your bike several times throughout the week, your bicycle will benefit from a regular cleaning and lubrication of the drive chain. Bicycle Tutor recommends cleaning and lubricating your bike’s drive chain at least once every month to maintain optimal performance and protection.

What is the best lubricant for a bike chain?

Best bike chain lubes

  • Squirt chain lube. …
  • Purple Harry’s Purple Extreme. …
  • Fenwicks Wet Weather. …
  • Muc-Off Hydrodynamic. …
  • Finish Line Wet. …
  • Morgan Blue Syn Lube Course. …
  • Rock ‘N’ Roll Gold. Impressively fast running and super clean membrane lube. …
  • Smoove chain lube. Very durable high-performance wax lube for extended clean efficiency.

Is silicone spray good for bike chains?

Yes. It is not optimal for use on chains though. It washes away rather easily leaving your chain unprotected and un-lubricated. It would work in a pinch but a light oil or something specifically made for the application will work much better and last a lot longer.

What is the best way to lubricate a bike chain?

Bike Clicking When Pedaling

Is it normal for a bike chain to make noise?

Component: Chain



That creaky squeaking you hear as you pedal “could mean that [your bike] has a dry chain or bearings,” Yozell says. Cleaning and lubing your chain is usually a good place to start with any weird noise, but if it doesn’t solve the squeak, you may need to maintain or replace some bearings (see below).

How do I stop my bike chain from popping?

Quote from video: But you just tighten up the bolts. While you pull on the back wheel and force it backwards. That's that side.

How do I stop my bike chain from rattling?

Quote from video: So it's a bargain hold the velcro on the chain stays. Still with the backing on and you can get a rough idea of where you need to cut it to shape it to get it right around the chain stays.

How do I know if my chain is worn?

Quote from video: If it lifts off the chain ring to where you can see a lot of daylight between your chain and chain rings.

How do you check a chain without a tool?

Another ballpark method for checking chain wear is by measuring it with a ruler. Pick a rivet and line it up at the zero mark. Count 24 more rivets and your last rivet should be at the 12″ mark of your ruler. If it is off by more than 1/16″ your chain is stretched to the point of replacement.

How often should you change your chain?

about every 2,000 to 3,000 miles

Replacing your chain regularly can prolong the life of your drivetrain. Most mechanics agree that you should replace your chain about every 2,000 to 3,000 miles, depending on your riding style.