What is aircraft wire?

Asked by: Rob Nunnallee

Aircraft cable is one of the most useful types of wire rope available. This type of wire rope is thin, flexible, and exceedingly strong. It consists of steel wires that have been stranded together (usually between 8 and 28 strands), which gives the cable a perfect blend of flexibility and strength.

What is the difference between aircraft cable and wire rope?

in general. wire rope refers to diameters larger than 3/8″. The smaller sizes are designated as Aircraft cable, cables, or cords. Two or more wires concentrically laid around a center wire is called a strand.

How strong is aircraft cable?

Aircraft cable sizes range from 1/32″ to 3/8″, with breaking strengths (tensile strengths) ranging from 120 pounds to 14,400 pounds.

How do you use an aircraft cable?

It means to never apply the saddle of the clip to the dead end of the rope. Be sure to space it one saddle length from the end of the dead. End tighten and torque the nuts.

What is Airplane top wire?

It is an HF (High Frequency) antenna. It is used for aircraft to communicate on overseas flights.

Is wire rope the same as cable?

The term cable is often used interchangeably with wire rope. However, in general, wire rope refers to diameters larger than 3/8 inch. Sizes smaller than this are designated as cable or cords. Two or more wires concentrically laid around a center wire is called a strand.

How strong is wire?

6 strand x 19 wire (6×19) – minimum breaking strength, safe loads and weight.

Why is aircraft wire stranded?

Because of in-flight vibration and flexing, conductor round wire should be stranded to minimize fatigue breakage.

What does aircraft cable weigh?

Cable weighs 0.11 pounds per foot and adheres to federal specification. Standard Reel Size (Flange Diameter x Height): 9.84 x 5.12 inches. Steel cable is often referred to as Aircraft cable, but this cable is not rated for aircraft use.

Will aircraft cable rust?

Stainless steel aircraft cable has superior corrosion resistance to galvanized aircraft cable in most environments. If you are concerned with corrosion, you should not be using galvanized aircraft cable.

What material is used in aircraft construction?

The most common metals used in aircraft construction are aluminum, magnesium, titanium, steel, and their alloys. An alloy is composed of two or more metals. The metal present in the alloy in the largest amount is called the base metal. All other metals added to the base metal are called alloying elements.

What is aircraft HF antenna?

The long wire antenna is used when the HF coupler is located in the forward part of the aircraft. The long wire provides maximum signal radiation off the sides of the aircraft and exhibit good efficiency even at the lower frequencies. Nulls in signal strength may be experienced off the nose and tail of the aircraft.

What is bracing in aircraft?

The term brace position refers to the the body position assumed by aircraft passengers prior to an imminent crash or other impact. The arms are braced against the seat in front, or locked around the knees or ankles. In the brace position, pillows or other padding may be used to cushion the impact.

What are aircraft nits?

Other cabin crew – on stations. NITS BRIEFING. N – Nature of the incident (what the emergency is) I – Intention (action to take)

What does the pilot say before crashing?

THE phrase “Easy Victor” is one that you never want to hear your pilot say on a flight – because it means the plane is going to crash. It’s often used by pilots to warn crew to evacuate the plane without alarming passengers according to a flight attendant.

What is full cantilever?

Often wings are of full cantilever design. This means they are built so that no external bracing is needed. They are supported internally by structural members assisted by the skin of the aircraft.

What is aircraft rib?

By analogy with the anatomical definition of “rib”, the ribs attach to the main spar, and by being repeated at frequent intervals, form a skeletal shape for the wing. Usually ribs incorporate the airfoil shape of the wing, and the skin adopts this shape when stretched over the ribs.

What is aircraft spar?

Wing Spars can be thought of as the skeleton or the frame of an aviation wing. Fuselage is fastened to the Wing Spars to hold in place. Airframe and Fuselage inspections might also involve the inspection of the spars to determine the structural integrity of the wing.

What are the 4 major categories of aircraft?

Classifications also correspond closer to the airman certificate categories than they do the aircraft categories.

• Airplane – Single-engine land or sea or multi-engine land or sea.
• Rotorcraft – helicopter or gyroplane.
• Lighter-Than-Air – balloons or airships.
• Powered Parachutes – land or sea.

What is aircraft type?

Aircraft Types Definition:



As used concerning the certification, ratings, privileges, and limitations of airmen, it means a specific make and basic aircraft model, including modifications that do not change its handling or flight characteristics. Examples include: 737-700, G-IV, and 1900; and.

What are 3 types of airplanes?

19 Different Types of Airplanes that Dominate the Skies

• Turboprop Aircraft.
• Piston Aircraft.
• Jets. Light Jets. Mid-Size Jets. Jumbo Jets. Regional Jets.
• Narrow Body Aircraft.
• Wide Body Airliners.
• Regional, Short-Haul, Federline Aircraft.
• Commuter liners.
• Airbus.