What is a u16 gas meter?
2 min read
Asked by: Brad Buckenmeyer
A U16 is a small diaphragm meter generally used for commercial applications and occasionally for domestic properties. The U number is used to define all Diaphragm Gas Meters and relates to the meter capacity in Standard Cubic Metres per Hour (SCMH). Therefore, a U16 meter has a capacity of 16 cubic metres per hour.
How do I know if I have a U16 gas meter?
Using the above principles, it should be easy to identify your meter size and model. A meter displaying Qmax = 16 m3/h will identify the meter as a U16 with a peak flow of 16 m3/h.
What is the difference between a U6 and U16 gas meter?
The U6 and SC6 meters incorporate a measuring unit with a two litre cyclic volume designed to accurately meter volumes in all natural gas and LPG applications. The U16 uses two of the same measuring unit to cope with larger flows of the same second and third family gases.
Can I work on a U16 meter?
If you have domestic qualifications, you can work on up to a U16 meter, 35mm copper or 1¼” steel, and an installation volume of 0.035m3. Anything over this requires non-domestic qualifications.
What is a G16 gas meter?
Product Description. Accurate and safe, this Elster BK-G16 405mm diaphragm gas meter measures the volume of gas used and sends a pulsed signal directly to your BMS system. Supplied in folded form as co-axial and two-pipe versions, BK-G16 ensures low bearing loads and quiet operation via a pneumatically stopped stroke.
How many kW can a U16 gas meter?
173 kW
| Meter Type: Low Pressure (Diaphragm Meters) | Flow Rate kW (kilowatts | Capacity (SCMH) Standard cubic metres per |
| U6 | 0 – 65 kW | 6 m³/hr |
| U16 | 66 – 173 kW | 16 m³/hr |
| U25 | 174 – 271 kW | 25 m³/hr |
| U40 | 272 – 430 kW | 40 m³/hr |
How can I tell what size gas meter I have?
Sizing Gas Meters
When a gas utility provider installs a gas meter at a residence, technicians will determine its size based on the total capacity of the home’s gas appliances. The gas meter’s label will indicate its capacity in cubic feet per hour (cf/h). Common meter sizes range from 175 cf/h to 275 cf/h.
What is the purge volume of a U16 meter?
Direct purging
| Table 4 – Purge Volumes | ||
|---|---|---|
| Meter | Pipework diameter | PV |
| U6, G4, E6 | <28mm | 0.01m3 |
| U6, G4, E6, U16 and G10 | > 28mm <35mm | 1.5 3 IV |
What are the different sizes of gas meters?
What size gas meter do I need?
| Meter Type | Flow Rate kW | Capacity (SCFH) Standard cf |
|---|---|---|
| U6 | 0-65 | 212 |
| U16 | 66 – 173 | 565 |
| U25 | 174 – 271 | 883 |
| U40 | 272 – 430 | 1412 |
How many kW can a domestic gas meter supply?
The standard gas meters (also known as G4/U6 meters) have a maximum output of 64.6 kWh, in order to confirm that your current supply will need an upgrade you’ll need a gas safe engineer to calculate your ‘Service Pipe Energy Value’ (SPEV) in kWh which covers the total amount of gas used by all appliances (or planned
Is a G16 gas meter commercial?
Our range of ACD G10-G16 meters are designed for commercial use for gas suppliers and gas utilities worldwide. The ACD diaphragm meters are used for applications requiring high precision and large rangeability at low pressure (below 1 bar gauge).
What is a G10 meter?
The Metrix G10L Diaphragm Gas Meter is designed for measurement of gas supplied to domestic and commercial premises, where the maximum consumption of gas is equivalent to 16m3/h of air of density of 1,2 kg/m3. Fitted with a test point.
What size pipe is gas meter?
4) Normal gas service piping from the main to the residential customer meter set is typically 1/2 inch or 3/4 inch Polyethylene (see 1a. above). A #12 coated copper wire is buried along with the plastic service terminating at the riser allowing electrical locating of the service line.
What size is residential gas line?
Some homes are only equipped with gas lines that are 3/4 inch (“) in diameter, as this is a standard size for supporting major appliances. Other homes may have a combination of 1-inch, 1/2-inch, and 3/4-inch gas lines.
What size gas line is needed for a gas range?
Usually the gas line coming into your kitchen will be 1/2-in. black threaded pipe, and the connection to the stove will be either a male (external threads) or female (internal threads) 1/2-in. fitting.
