What is a Garboard drain plug?
6 min read
Asked by: Shea Lindsay
Various companies make garboard drain plugs, basically threaded bronze fittings that securely plug a drain hole when the boat is afloat and can be opened when it’s on the hard to let out rainwater. It’s better to go for one where both the flange fitting and the plug are bronze. Some are a mix of brass and bronze.
What is a Garboard on a boat?
/ (ˈɡɑːˌbɔːd) / noun. nautical the bottommost plank of a vessel’s hullAlso called: garboard plank, garboard strake.
What size is a Garboard drain plug?
1/2 inch
These traditional Garboard Drain Plugs are constructed of cast bronze flanges and 1/2 inch brass plug. Garboard plugs are screw in style with #8 screw threads. Flange OD is 2 inches, pipe size is 1/2 inch. Spare plugs also available, DP1 standard square drive head and DP2 has a stainless steel pin for easy tightening.
Where is the Garboard on a boat?
In boat and ship construction, strakes immediately adjacent to either side of the keel are known as the garboard strakes or A strakes.
What size is my boat drain plug?
The most common for today’s recreational boat is one that fits a 1-inch diameter hole.
What is the meaning of Garboard strake?
Definitions of garboard strake. the first wale laid next to the keel of a wooden ship. synonyms: garboard, garboard plank. type of: strake, wale. thick plank forming a ridge along the side of a wooden ship.
What is a boat plug called?
This is a drain plug. When removed from the bottom of your boat’s transom, water drains out. When inserted in the transom, it prevents water from coming back in. Sounds pretty simple, and maybe that’s why a drain plug is truly The Root Of All Evil.
Why do boats have drain plugs?
A drain plug is a plug that is located at the bottom of your boat’s transom. When you remove this plug, water drains out. If you replace it, it prevents water from coming back in. It is highly important that you remember to drain the water from your boat and then put the plug back in while your boat is on land.
How many drain plugs does a boat have?
All boats (except ProStar) have two drain plugs, which allow water to be drained from the boat when the boat is OUT of the water.
How do you use a boat drain plug?
It's either from the inside of the boat if it's accessible. Or if it is on the outside of the boat that you make it so that the flip goes up towards the waterline instead of down underwater.
How do you install a Garboard drain?
To install the fitting, simply drill a pilot hole, angled slightly downward, through the hull’s side at the lowest point in the bilge. After that, use a hole saw the same diameter as the stem on your garboard drain—depending on the maker, this will be up to 1 1/8in—to cut the hole proper.
How do you measure a drain plug?
Digital calipers are the best way to measure the oil drain plug diameter. Measure the width of the plug at the widest part of the thread.
How do you install a transom drain tube?
Before super helpful so definitely grab that and then the one-inch drain tube is made out of brass one side is flared. And one side is not you'll also need PL marine this is made by Loctite.
What is a Splashwell?
On most Boston Whaler boats the motor is not mounted in a well. The motor is mounted to the transom. Surrounding the motor is a splash well. The purpose of a splash well is to act as a well (see definition 5) to collect sea water that has splashed aboard which otherwise would enter the boat’s cockpit and deck area.
How do you put a plug in a boat?
And twist clockwise to tighten snug as a general rule when the boat is in the water the plug must always be in and you should take it out when not in the water to allow for proper drainage.
What’s the window above a door called?
Transom Window–A horizontal, rectangular window placed directly above a door window.
What is the long thin rectangle above the front door called?
In architecture, a transom is a transverse horizontal structural beam or bar, or a crosspiece separating a door from a window above it.
What is the little window in a front door called?
Door Sidelights
Front Door Sidelights
Sidelights are fixed windows that are attached to the side of an entry door. They are typically tall and narrow and help add architectural interest to the front of your home and natural light to your entryway.
What is a piano window?
They’re called “piano windows” or “transom windows” and were a hallmark of upward-mobility sensibilities, an aspirational gesture for people enjoying the fruits of boomtown St. Paul. By Bill Lindeke | Columnist.
Why do old houses have stained glass windows?
Installed as sidelights flanking a front door, as transoms above standard double-hung or casement windows, or even in place of an operable window in a dining area, stair hall, or bathroom, stained glass provides privacy and can obscure a view without blocking natural light.
Is stained glass a dying art?
Without formal programs it is difficult to measure the health of the craft with such datum as how many young people may be entering into the trade, thus contributing to the reputation of stained glass as a “dying art.”
How can you tell how old stained glass is?
Glass Type
You can tell the age/authenticity of stained glass by looking at the glass that’s used. If the glass is opalescent(has more than one color), it is probably made after 1880. If green-colored glass called the ‘slag’ is used to make the stained glass, it’s probably made in the early 1900s.
Why do Catholic churches have stained glass windows?
Indeed, stained glass windows are utilized in Catholic churches to help bridge the gap between the earthly and the divine. Offering viewers an ethereal experience of color and light, this glass remains beloved even centuries after first installed!
Why is the pulpit elevated?
The traditional pulpit is raised well above the surrounding floor for audibility and visibility, accessed by steps, with sides coming to about waist height.
What are the colorful windows in churches called?
stained glass
The term stained glass refers either to coloured glass as a material or to works created from it. Throughout its thousand-year history, the term has been applied almost exclusively to the windows of churches and other significant religious buildings.