What is a cam lock key?

Asked by: Jimi Langley

Cam locks are a type of hardware used for locking drawers, cabinets and other furnishings. These locks consist of a base, which contains a keyhole, and a long tailpiece or tongue known as a cam. When a key is inserted into the base, the cam is rotated between 180 and 90 degrees.

What is the purpose of a cam lock?

Cam locks provide a long-lasting solution and prevent theft of private mail. Cam locks are found in many applications within the automotive industry, including campers and motorhomes, fuel filler caps, trailer hitch locks, roof racks and much more.

How does a keyed cam lock work?

What Are Cam Locks? Cam locks are L-shaped locking mechanisms that are used to secure cabinets, lockers and other enclosures. They consist of two main parts: a cylindrical keyed nut and a tongue bar (also known as a cam). Once installed, you can lock the enclosure by inserting a key into the former part and turning it.

How do you unlock a cam lock without a key?

For a simple cam lock, you can get an old standard blade screwdriver that you don’t care about messing up. Use a hammer and drive the screwdriver into the key slot, the further the better. Use a pipe wrench on the screwdriver handle, and turn. In most cases, that will torque the lock open.

How do you unlock a cam lock?

How to Unlock a Cam Lock in Furniture Assembly

1. Select a screwdriver that best fits the slotted or Phillips-head recess on the top of the cam. …
2. Turn the handle of the screwdriver counterclockwise to turn the cam within its hole. …
3. Pull one piece of furniture away from the other to confirm that you unlocked the cam lock.

Are cam locks good?

Camlocks made of stainless steel are known for strength and durability. They are able to withstand high temperatures and are highly resistant to corrosion from chemicals or liquids.

Are cam locks secure?

These locks are not typically as durable or secure as other types of locking devices, and may not be sufficient for high security applications. They are typically easy to break into by drilling or using other lock picking tools.

How can you tell if a cam is locked?

The quickest and easiest way to identify the key for your camlock is to look for a series of numbers stamped on the head of the key. Simply type this number into the search box above and your camlock key will be identified.

How do you master key a cam lock?

All you need to do here is just take like your little screwdriver. Okay put this down. And you're just gonna pop it in so just gonna put.

How do you set a cam lock?

And turning the lock locate the change button on the bottom of the lock. And using the straight end of the paperclip push in the change button on the bottom of the combi. Cam.

Can you undo cam locks?

So we're going to turn counterclockwise and just unscrew it and you need to make sure that this mark is pointing to a way that it's kind of loose.

Why do cam locks not work?

Cam lock fasteners are not intended to draw a joint closed; they really should only hold it snug after the pieces have been fully pressed together. Try rotating the nuts to their open position, then press the pieces together to eliminate the gap, and finally rotate the cam to lock things together.

Do cam locks tighten?

If you have screwed the pin in too far, unscrew the pin so that it is screwed only until the end of the thread and try to assemble the unit again. Your cam lock should be able to lock and tighten at that time.

Are cam locks interchangeable?

Are Camlocks Interchangable? Between manufacturers, cam & groove couplings are interchangeable as they are built to the same standards. (The standard for cam & groove couplings is based on the US military specification Mil-C-27487 now superseded by A-A-59326D.

How do you drill out a cam lock?

First okay so if you're wondering how deep you have to go. This is my drill bit and I drilled in all the way. Down.