What is a 6/32 machine screw?
3 min read
Asked by: Kevin Hill
The 632 Kit is an assortment of Flat Head Phillips Machine Screws that feature 6 different sizes ranging from 1/2” to 2”. Machine screws are used for fastening components of machines, tools, appliances, and electronic devices.
What number is a 6 32 screw?
Screws have three basic measurements: gauge, threads per inch, and shaft length in inches. So, you may also see a measurement like 6-32 x 1 1/2″. This means it’s a #6 diameter, with 32 threads per inch (almost double the normal thread count as a standard wood screw) and an inch and a half long.
What is 6 32 thread size in metric?
Table 2.
| Size | Series | Pitch (inches) |
|---|---|---|
| 9/16-18 | Inch | 0.056 |
| M3.5-0.6 | Metric | 0.024 |
| 6-32 | Inch | 0.031 |
| M3.5-0.35 | Metric | 0.014 |
What size is a #6 machine screw?
US Machine Screw Diameters
| Size | Nominal Thread Diameter | |
|---|---|---|
| Decimal | Nearest Fractional | |
| #6 | 0.138″ | 9/64″ |
| #8 | 0.164″ | 5/32″ |
| #10 | 0.190″ | 3/16″ |
Is M6 the same as 6 32?
You can identify an M6 screw by measuring the diameter with a ruler. It’ll be 6 mm, or slightly more than 7/32 inches (0.228″).
Is a machine screw the same as a bolt?
Is a Machine Screw a Bolt? The exact difference between machine screws and bolts is not always clear, particularly as their appearance is similar. However, machine screws are typically smaller than bolts, although a more precise distinction is the way that they are tightened in a tapped hole.
What are machine screw sizes?
Machine screws are often found in sizes of: 0, 1, 2, 3, 4, 5, 6, 8, 10, 12, 14—the larger the number, the larger the screw. Machine screws, but especially caps screws and bolts, can range from 1/4 inch up to 3 inches or more.
How do you read a machine screw size?
Look at the first number to find the screw’s diameter.
It corresponds to the width of the threads on the screw’s shaft. In the metric system, the diameter is always measured in millimeters. For instance, on a M12 x 1.75 x 85 callout, M12 is the diameter. It means the external threads are 12 mm (0.47 in) wide.
What thread are machine screws?
The threading
In addition to that, the vast majority of machine screws are usually designed to have two types of thread: coarse thread and fine thread. The coarse thread machine screws usually have 24 threads per inch, and the fine thread ones usually have 32 threads per inch.
What is a #6 screw?
A 6 gauge screw will have a head almost equal to 6 mm wide. Correlation between diameter (metric in mm), gauge(imperial) and head size is complicated. There is nowhere you will find information that can guarantee you can calculate this effectively.
How many mm is a #6 screw?
Metric Imperial Screw Conversion Chart
| Diameter (mm) | Length (mm) | Closest Imperial Size Gauge x Length |
|---|---|---|
| 3.5mm | 20 | 6 x 3/4 |
| 25 | 6 x 1 | |
| 30 | 6 x 1 1/4 | |
| 40 | 6 x 1 1/2 |
What is the diameter of a 8 32 machine screw?
0.164 Inch
Thread Diameter: 0.164 Inch (#8 Size); Head Diameter: 0.322 Inch; Head Height: 0.115 Inch; Phillips Drive Size #2. Threads per Inch: 32; Thread Type: Coarse Standard.
What do screw size numbers mean?
The first number is the diameter. The bigger the number the bigger the screw. The second number is the number of threads per inch. Check your state and local codes before starting any project. Follow all safety precautions.
