What does fresh and clear do?

Asked by: Kimberly Herawati

Fresh ‘N Clear is a quick-acting formula that dissolves fast in your pool, leaving you with more time to relax in it. This Non-Chlorine Shock allows you to clean your pool as an effective alternative to standard chlorine shocks.

How long does it take for fresh and clear to work?

Shock & Swim Just 15 Minutes After Use



Leslie’s Fresh ‘N Clear contains no chlorine or other disinfectant. This means that the waiting time to enjoy the water after a shock treatment is only 15 minutes.

How long after adding fresh and clear Can you swim?

8) How long after adding chemicals can I swim? Alkalinity Balance, pH up, pH down, Calcium Balance, Water Stabilizer, and clarifier are all swim-safe chemicals. Wait about 20 minutes, and you are free to swim.

Does fresh and clear have CYA?

Fresh ‘N Clear (Chlorine-Free Shock) is safe for all pool surfaces. Since chlorine-free shock doesn’t contain chlorine, it must be used in conjunction with a water sanitizer like chlorine, bromine, or a saltwater chlorine generator.

How do you use fresh and clear oxidizing shocks?

Step one mix only into water using clean dry utensils. Step two never add water to product always add product to large quantities of water. Step 3 enter the pool.

Can you put too much clarifier in a pool?

Too much clarifier in your pool can cause an adverse reaction where your pool ends up remaining cloudy. If this happens, it’s best to partially drain your pool and top it up with fresh water. You can then filter out the remaining pool clarifier overload, but be careful, too much clarifier will clog your filter.

What is Leslie’s fresh and clear used for?

Fresh ‘N Clear is a quick-acting formula that dissolves fast in your pool, leaving you with more time to relax in it. This Non-Chlorine Shock allows you to clean your pool as an effective alternative to standard chlorine shocks.

Why is my pool shock not dissolving?

Most often, if your chlorine tablets aren’t dissolving, it’s because there is something wrong with the chemical feeder. Most commonly, it’s because the chemical feeder is clogged up or dirty, so water isn’t reaching the tablets properly, and therefore they aren’t getting dissolved into the pool.

Does Shocking a pool lower alkalinity?

Another cause for high alkalinity can be when you shock the pool. While this is performed to quickly rid the pool of pollutants, chlorine-based pool shock is highly alkaline, and can raise the water’s total alkalinity level in the process.

What order do you add pool chemicals?

First can help bring your ph. Into range if you need to raise your alkalinity. You can use an alkalinity increaser or baking soda. If you need to lower your alkalinity.

Can I add all pool chemicals at the same time?

You should not add all pool chemicals at the same time. You should also avoid mixing pool chemicals together. Adding chemicals at one time can cause dangerous chemical reactions and serious injuries. In addition, it will make it difficult to balance the pool.

What is the best time to run your pool pump?

The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.

What happens if pH is too low in pool?

Low pH water will cause etching and deterioration of plaster, grout, stone, concrete and tiling. Any vinyl surfaces will also become brittle, which increases risk of cracks and tears. All of these dissolved minerals will hold in the solution of your pool water; which can result in staining and cloudy pool water.

Does Shocking a pool raise pH?

Pool shock.



Shocking your pool is important, but if you’re using cal-hypo (calcium hypochlorite), it can raise your pool’s pH levels. Don’t stop shocking your pool, but do test all your chemistry levels consistently, especially after shocking.

Does adding chlorine increase pH?

Using liquid chlorine raises the pH of the water.



Liquid chlorine does not raise pH. When added to water, liquid chlorine (which has a pH of 13) makes HOCl (hypochlorous acid – the killing form of chlorine) and NaOH (sodium hydroxide), which raises pH.

What does alkalinity do in a pool?

What is important to understand is that alkalinity helps stabilize the pH balance in your pool, and keeping it within normal range can save you a lot of headaches as well as solve a lot of problems. The recommended range for a swimming pool’s total alkalinity is between 80 and 120 parts per million.

Does pool shock raise alkalinity?

It’s also not uncommon for pool owners to go a bit overboard when shocking their pool, and since chlorine-based pool shock is a high-alkaline substance, it will also naturally raise your pool alkalinity.

What should be adjusted first alkalinity or pH?

Alkalinity is the total alkaline material in your pool water. You should test alkalinity first because it will buffer pH. Your reading should be in the range of 80 to 120 parts per million (ppm).

Does chlorine raise or lower alkalinity?

Most people know that chlorine is an important chemical in keeping pool water safe for swimming. But adding too much chlorine can lower your pool’s pH as well as its total alkalinity.

What does Borax do for a pool?

Borax acts as an effective pH buffer and helps prevent algae growth in swimming pools. Plus, it will leave your water looking sparkly and feeling soft.

Why is my pool pH always high?

The most common reason for a consistently high pH level in pools is the use of liquid chlorine or a saltwater system as the primary sanitizer. Sodium hydroxide is produced, which has a pH of around 13. New pool plaster or pebble finishes will also raise pH in pools for about a year after installation.

How do I make my pool water crystal clear?

In theory, if you have a cloudy swimming pool, you can add chlorine to “shock it” and clear things up. Chlorine will get the job done. But, the amounts may vary and you may have to really pound the pool with chlorine to get the water totally clear.

How long does it take for pool clarifier to work?

2-3 days

Depending on your pool’s level of cloudiness, it can take 2-3 days to clear up your water using pool water clarifier. You’ll need to balance your water and run your filter 24/7 while the clarifier is at work. And if you have an algae problem, you’ll have to address that first before adding clarifier.

How do I make my pool water blue?

How do I turn my green pool blue?

1. Shock the pool with chlorine every day until all the green is gone (possibly 3 to 4 days).
2. Run the filter 24 hours a day and backwash every day until the green and then cloudiness is gone (usually up to 7 days, sometimes as long as 2 weeks depending on the filter).