What do you put under your above ground pool legs?
4 min read
Asked by: Sean Payne
What should I put under the legs of my above ground pool?
Pavers – This is the best choice for placing under above ground pool legs. Pavers are sturdy, not prone to wear from weather, and they are easy to find. It’s worth the time and effort to support your pool with these.
What can I put under Intex pool legs?
You SHOULD put a wood block or concrete paver under each leg. The paver should be at least 1ft x 1ft in size and should be level with the ground.
How do I keep my pool legs from sinking?
I was afraid that this would absorb moisture eventually and would swell up and rot and give away. So i decided to use a barrel out of plastic.
Should I put blocks under the legs of my above ground pool?
They are not necessary in order to get the pool set up, but you WILL wish that you had them if you don’t place them now. I’ve had some smaller Intex’s, and have gone through not having pavers under the legs. They will settle, make the pool uneven, drop the water level, look bad, and p1ss you off.
How do you support Intex pool legs?
Leg Supports
Intex recommends using pressure treated boards instead of pavers to support the legs on their rectangular pools. The support for the legs needs to be large enough so the legs do not hang off the sides of the support, and so the legs have room to spread out as the pool is filled.
Should you put pavers under above ground pool uprights?
Yes you DO want pavers under your legs. That will keep them from sinking. The pavers need to be level with the ground so they do not poke your liner. The ground prep is a lot of work BUT it will pay off in the end!
What kind of foam goes under a pool?
And then laying the table along seams and just ensuring that the seams are tight by squeezing it together and just putting you know those squares.
What blocks for above ground pool?
Set Blocks in Place: To provide support for the uprights, or the posts in between each wall panel, it is recommended to sink a concrete block, a patio paver into the ground, at the finished height of the pool floor.
Can you put Intex pool on pavers?
Pavers must sit on solid earth, level and covered up with a solid layer of 3-4 inches of compacted stone dust inside the pool. This will make for a solid base and a professional pool bottom that will last the lifetime of the pool. Pools are heavy when water is in them. Make sure the pavers are on solid earth!
Can you level a pool with blocks?
Leveling the Pool’s Bottom Track
We would just level the earth and lay the track down and roll out the wall. The result was some of those pools were pretty “off level”. Today every pool installer uses some kind of blocks for leveling the track and we place a block under every one of the bottom track connectors.
What to put under pool to level it?
Concrete is probably the best option since it is usually 100% level and smooth. Also, grass can’t grow through concrete and animals and bugs can’t damage or burrow through it either. Grass or dirt is also another great option, as long as it has been properly leveled and you’ve killed off the grass first.
How do I level my above ground pool without digging?
You could also use a flat shovel to help you do this. But you keep pulling all around the circle there and eventually you'll have a nice level spot for your above-ground pool.
What should I level my pool with?
First piece of rope. And a metal eyelet. At the end of the board. And we just pulled it around the outside. Watching the level using the shovel and the right to thin it out as we go.
What is the easiest way to level ground for a pool?
- STEP 1: Determine your location and remove any large rocks or debris. …
- STEP 2: Place 2x4s on the site and place a level on top. …
- STEP 3: Add or take away soil until the ground is level. …
- STEP 4: Repeat the process until the entire area is flat. …
- STEP 5: Rake any remaining rocks or debris and tamp the ground.
How do I level my pool without sand?
Pivot the plank slowly around the pool area, leveling the soil. Continue this until the plank is able to rotate 360 degrees without stopping. Finally, spread a layer of finely crushed limestone over the newly leveled area, and finish it off by wetting, tamping, and leveling it with the plank.
