What do I do after I shock my pool?
7 min read
Asked by: Johnny Giuffrida
Answer: After shocking the pool, it will need filtration and circulation. Run the pump as much as possible. Keep the filter clean (daily) until the water runs clear. Be sure to brush the pool often during this process as above-ground pools do not have drains at the bottom.
How long do you have to wait after you shock the pool?
24 hours
After Shocking Your Pool
It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!
How long should I run my pool pump after shocking?
A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water. Running the filter after shocking for 24 hours to 7 days is necessary if the pool has a large amount of algae.
Can you swim in a pool after you put shock in it?
After you shock the pool — As soon as your chlorine levels reach 5 ppm or lower, it’s officially safe to swim. Depending on the type of shock used, as well as the amount used, it can take anywhere from 24 hours or even up to a couple of days.
Should you brush your pool after you shock it?
Always shock with pH levels between 7.2-7.4. Always brush your pool after shocking, with the pump running, to help quickly distribute the chlorine.
Is it better to run a pool pump at night or day?
It’s best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
Do you run pool pump while swimming?
Chemicals that you add to your pool while the water is circulating don’t need to be recirculated; they will stay mixed even if you don’t pump the water continually. Although it’s generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.
Is it OK to run pool pump 24 hours a day?
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
What time of day is best to run pool pump?
The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
Do you shock pool with filter running?
It’s best to shock your pool once the sun goes down and when the pool filter is running. If you put the shock in while it’s sunny out, it will not work as well. Never shock your pool when people are swimming in it.
Should I shock my pool every week?
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
What time of day should I shock my pool?
evening
Sun Down – You’ll want to shock your pool in the evening when the sun has gone down. This gives your pool plenty of time during the night to free the chlorine and clean the water. In the morning, you should be able to enjoy your pool. If you shock your pool during the day, the sun’s UV rays will dissolve the chlorine.
Should you vacuum pool before shocking?
Although vacuuming should be combined with pool shocking, it’s better to vacuum the pool before you shock the water. A good scrubbing and vacuuming of the pool walls and floor will ensure that dirt and debris that can affect the water chemistry is removed before the chlorine is added.
Can you shock a pool two days in a row?
It’s pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn’t be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.
What’s the difference between chlorine and shock?
Chlorine is a sanitizer, and (unless you use Baquacil products) is necessary for maintaining a clear and healthy pool. Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly.
Do I use shock or algaecide first?
While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
What order do I add chemicals to my pool?
First when you first fill up your pool or you're first beginning your water balance. You need to adjust your total alkalinity following that you need to adjust your pH.
Why did my pool turn green after I shocked it?
Pools can immediately turn green after shocking when they have metals like copper in the water. These metals oxidise when exposed to high levels of chlorine which makes the pool water turn green. Adding a metal control product such as Zodiac Metal Remover will help to restore the pool water.
How long after putting shock in pool can I add algaecide?
24 hours
Your chlorine levels won’t return to normal right after you shock your pool anyway, so we recommend waiting at least 24 hours to add algaecide. When adding algaecide to your pool, make sure you add the correct amount.
Can I add shock and chlorine at the same time?
Adding chlorine besides the shock can increase the chlorine content in the water which can make the entire shocking process useless. Hence, it is better if you don’t use the shock and chlorine at the same time. The best time to add chlorine to the pool water is after you have shocked the pool.
Can you add clarifier and shock at the same time?
It’s not a good idea to use pool shock at the same time as clarifier. Some clarifiers are polymer based and the shock can act to break up the polymer causing the clarifier to be ineffective. It’s best to shock your pool before and wait a day or two before adding clarifier.
What is the difference between algaecide and chlorine?
Chlorine—yep, your typical sanitizer—is much more effective at killing algae than algaecide is. Even if your water gets cloudy and your walls get slimy, chlorine can still kill it. That’s because chlorine oxidizes bacteria and single-celled algae, which means they trade electrons.
Why does my pool have foam?
Foam in a pool is due to the water being “thick.” This thickness creates bubbles. The bubbles are filled with air that can come from your pool circulation system that return the water back into the pool or even the wind outside. Common causes of foam are: Hair care products – shampoo, gel, hairspray, etc.
Why is my pool slimy?
In most cases, the walls and floor of your pool feel slimy and slippery due to a lack of pool maintenance. Water chemistry is important in order to maintain clear and bacteria-free water. Generally, slippery and slimy pool walls are an early indication of bacteria and algae growth.
What is better chlorine tablets or liquid?
We dive in and find out. Liquid chlorine is preferred over chlorine tablets by pool professionals however home swimming pools will benefit too. Liquid chlorine quickly raises or maintains chlorine levels without raising stabilizer. Chlorine tablets maintain chlorine levels and add stabilizer to the pool water.
How do I get sludge out of the bottom of my pool?
- Use a pool net to skim away leaves, dead bugs and debris from the surface of the pool. …
- Use a pool vacuum to clean the bottom of the pool. …
- Sweep the bottom of the pool to remove the slime. …
- Vacuum the pool again an hour or two later to remove more of the slime once it has settled.