What are the parts of a pool table?
4 min read
Asked by: Stephanie Guerrero
Parts of the Pool Table Defined
- Apex of the Triangle. This is the top of the rack. …
- Center String. The center string runs between the two side pockets and intersects the center spot (dead center of the pool table). …
- Corner Pockets. …
- Cushion. …
- Diamonds (aka Sights) …
- Foot of the Table. …
- Foot Spot. …
- Foot String.
What are the edges of a pool table called?
The surround is the edge (apron) of the table, and also is part of the and upper top of the pool table, which provides a backing for the rails. The Rails are rubber bumpers of a certain profile that line the edges of the table and the pockets.
What is the top part of the pool table called?
Top Rails
Top Rails – The top surface of the table, no covered by cloth, from which the cushions protrude toward the playing surface. The head and foot rails are the short rails on those ends of the table; the right and the left rails are the long rails, dictated by standing at the head of the table and facing the foot end.
What are the dots on the pool table rails called?
Each dot is designed to act as an angle marker to guide players in making bank shots; for example, a typical straight shot aimed at a dot will bounce off at a right angle.
What is the dot in the middle of the pool table for?
Pool players use the dots on a pool table to divide them into sections to choose the best angles for any given shot. Most expert players use the dots to improve the accuracy of their kick shots and bank shots. This way of using the table as some grid is called the diamond system.
What is the triangle on a pool table called?
A rack (sometimes called a triangle) is a piece of equipment that is used to place billiard balls in their starting positions at the beginning of a pocket billiards game.
What is the end of a cue called?
The heavy, lower piece of the cue is the cue butt, and the smaller, narrower end is the shaft. The two cue pieces are attached at the joint; normally a screw rising from butt end’s joint (male) is threaded into a receptacle on the shaft (female), or vice versa.
What are the sticks in pool called?
billiards, any of various games played on a rectangular table with a designated number of small balls and a long stick called a cue. The table and the cushioned rail bordering the table are topped with a feltlike tight-fitting cloth.
Where do the diamonds go on a pool table?
Anytime. You go over one rail if you hit two three or more rails.
What is the head string on a pool table?
The head strong is an imaginary line that runs at the head of the table between the second diamonds on the long rail. The area behind the head string is where you break from, and where you must place the cue ball in a game of 8-ball after a scratch, for example.
What’s the difference between a pool table and a billiard table?
Traditionally, billiards tables do not have pockets. As such, the various games are referred to as carom billiards, or pocketless billiards. In contrast, pool tables (or pocket billiards tables) have six pockets, including pockets in each corner and one in the middle of each long side.
What is a pool table without pockets called?
carom billiards,, also called French billiards, game played with three balls (two white and one red) on a table without pockets, in which the object is to drive one of the white balls (cue ball) into both of the other balls. Each carom thus completed counts one point.
What are the 2 types of pool balls?
When it comes to cue sports, there are typically two primary types of balls that you can choose between: Standard balls, or Aramith balls. Here are the basic differences between each. Standard balls come as a standard with every pool table, and are a good set if you just need something to get you started.
