What are dirt bike stands used for?

Asked by: Jon Capps

Putting your bike on the stand will keep your wheels elevated to avoid suspension and tire problems from long-term lack of use. A dirt bike stand also makes dirt bike maintenance much easier as it creates a raised, stable work area.

When should you stand on a dirt bike?

And sitting a general rule is to always stand up unless you are accelerating out of a corner.

Why do people put motorcycles on stands?

A motorcycle center-stand is intended primarily for maintenance work, not for routine parking of a bike. It allows you to get one (or both) of the wheels off the ground to enable chain maintenance or removing one or both of the wheels. By default (on most modern bikes) it is the rear wheel that is lifted.

Why is there no kickstand on a dirt bike?

The real reason why dirt bikes don’t have kickstands is a weight saving. The heavier the bike the slower the rider goes. Some riders complain about the annoying rattling sounds they make, so motocross riders would much rather avoid them.

How do you lift a dirt bike on a stand?

If you have a lift stand, you need to roll the bike into position. Then, use the levers to pump up the stand to the desired height. If not, you can lean the bike on its side, then grip and lift it into place. You can also park the dirt bike next to the stand.

Should you leave your dirt bike on a stand?

You should use a dirt bike stand whenever you’re not riding. A stand is useful for propping your bike up when making repairs, cleaning your bike, and just storing it in the garage.

What is the point of a paddock stand?

A paddock stand is essentially a metal contraption that keeps a motorcycle stable while it is stationary. Don’t confuse it with a side-stand or a centre-stand of your motorcycle as with a paddock stand, you can keep one wheel, or both wheels in the air.

Can I sit on bike on paddock stand?

Even without those worries, two people on a bike on a paddock stand is very bad practice, you could anticipate a paddock stand collapse before long if you made a habit of it. Just take it off the stand to test your handles or better still go out for a ride. Lubeing the chain with the bike in gear offers no benefits.

Can you leave your bike on a paddock stand?

You don’t have to but it can have its advantages. If you use a front and rear paddock stand when storing the bike, you keep the weight off the tyres, which in turn can save them from deforming, cracking or getting a cold-related surface burn. It all depends on how long you’re going to store the bike for.

Do you need front and rear paddock stand?

Always start the process by installing the rear stand first. Make sure not to use the front paddock stand first without the rear paddock stand already in place otherwise you run the risk of the bike falling over.

Do I need a motorcycle stand?

The primary function of the motorcycle stand is to ensure that your bike stays in an upright position to prevent potentially damaging falls and injury when you’re working on the bike. The motorcycle stand is an essential part of the bike equipment that needs to get special attention.

Where should a paddock stand be placed?

And you cannot use them on their own as on the rear paddock stand it's important to adjust the width of the front to make sure it fits with the bottom of the forks.

Can you use a front paddock stand on its own?

Never use a front paddock stand on its own (the bike won’t stay on it) – always put your bike on a rear stand first.

Is Paddock Stand safe?

And that is what makes a Paddock Stand all the more important to prevent any safety hazard when it comes to superbikes. Believe it or not, Paddock stand does save lives. It saves the life of the side-stand of your motorbike and also saves the life of your bike’s tires.

Do you need bobbins for a paddock stand?

What do I need to use a paddock stand? Most rear stands will either be hook style or bobbin style. Hook style stands have bobbins (cotton reels or lifters) which usually get inserted into the swingarm and allow the hooks to lift. The bobbin type has the bobbin on the stand and the hook on the swingarm.

How do you use a front paddock stand?

And the bikes understand. Now we need to locate the front paddock stand on the forks. So if we just line up the front paddocks down with the forks or just see if it's going to be fit.

How do you use a sport bike stand?

To use the rear stand, simply support the motorcycle in a vertical position, then position the stand to the rear of the bike and position the clips of the stand at the spools (or just under the swingarm if using a swingarm stand).

How do you lift the front of a motorcycle without a stand?

You can actually just put a floor jack under there and you can you can lift it this way you know lift it with a floor jack. Or you know even a bottle jack or something but um in this case.

How do you put a motorbike on a rear paddock stand?

Either side answer the bobbins. Themselves now once you've got them in suits you you can put pressure on the rear of the paddock. Stand itself and it will just pick the bike up and hold its weight.

How do you use motorcycle stand by yourself?

Nice and easy put it down once i feel the tire on the ground i'm starting to push get that thing over on the kickstand go on the kickstand there you go. And bring it back out.

How do you use a motorcycle center stand?

Make sure the front wheel and handlebars are centered, with the front wheel in alignment with the rear wheel. Push the stand down so that the left leg of the stand is touching the pavement, then stand the motorcycle up until both centerstand feet are touching the pavement.