Spoke wrench conversion master guide
4 min read
Asked by: Sandy Lopez
How do I know what size spoke wrench to get?
The best method to determine the correct spoke wrench size is to use a caliper and measure the nipple across the wrench flats. It is important to know that the diameter, or so called “gauge”, of the spoke does not determine the spoke wrench size.
What size is a 14 spoke wrench?
Sizes
| Spoke wire gauge | spoke size | nipple size |
|---|---|---|
| 14 | 2.0 mm | 3.30 mm (0.130 in) |
| 14 | 2.0 mm | 3.40 mm (0.134 in) |
| 13 | 2.3 mm | 3.45 mm (0.136 in) |
| 14 | 2.0 mm | 3.96 mm (0.156 in) |
What size is a bicycle spoke wrench?
Unless you know the exact size spoke wrench you need, or unless the spoke nipples are star- or hex-shaped, you can get a three-way spoke wrench that fits the three most common sizes (3.23mm, 3.30mm, and 3.45mm) like the Park Tool SW-7.2 triple spoke wrench.
What is the best spoke wrench?
Quote from video: Range at number one park tool spoke wrench sw12. The long handle provides good leverage for stubborn spoke nipples comfortable vinyl dipped double-ended park tool sw-12 spoke key for select mavic
What diameter is a 14g spoke?
For example, spokes that are 2mm in diameter (so-called “14 gauge”) will fit several different sized nipples and require different wrenches.
How many MM is a 12 gauge spoke?
2.6 mm
12 ga – 2.6 mm. 13 ga – 2.3 mm.
What can I use instead of a spoke wrench?
To make your own house key spoke wrench, simply clamp the key in a vise to hold it so you can cut a nipple-sized slot in it. Don’t overtighten the key or you might damage it.
What is the length of 700c spokes?
Spokes for 500W DD 700c wheels (192mm)
What size are spoke threads?
Thread pitch can vary with thread size, but is 0.454mm for common spoke thicknesses, which use thread types Fg 2, Fg 2.3 or Fg 2.6. Since spoke threading and nipple threading must match, boxes of spokes usually include a like number of nipples.
How tight should spokes be?
Put your thumb around one spoke and your fingers around the spoke next to it and squeeze. The spokes should feel tight and firm. They should have just a little give when you squeeze them fairly hard.
What size are MTB spokes?
A majority of mountain bike wheels use either 24, 28, or 32 spokes per wheel depending on their intended use.
What size is a 12g spoke?
2.6mm
Custom cut 12 gauge – 2.6mm spokes.
How thick is a 13g spoke?
2.3 mm
Diameter 13g – 2.3 mm.
What diameter is a 9 gauge spoke?
9 Gauge Diameter 3.5 mm Spoke’s Nipples 304 Stainless Steel Material Sliver Color 21.75mm Length Motorcycle Spoke Nipples. Color: 41 Pieces a pack. 40 pieces a pack.
What can I use instead of a spoke wrench?
To make your own house key spoke wrench, simply clamp the key in a vise to hold it so you can cut a nipple-sized slot in it. Don’t overtighten the key or you might damage it.
How many MM is a 12 gauge spoke?
2.6 mm
12 ga – 2.6 mm. 13 ga – 2.3 mm.
What size are spoke threads?
Thread pitch can vary with thread size, but is 0.454mm for common spoke thicknesses, which use thread types Fg 2, Fg 2.3 or Fg 2.6. Since spoke threading and nipple threading must match, boxes of spokes usually include a like number of nipples.
What can I use to tighten spokes?
Quote from video: The best tool for tightening your spokes is a 12-gauge spoke wrench.
Can I tighten spokes without a spoke wrench?
To make them able to be tightened by mere fingers, you need to release the tension on them so the nipples will spin easily. That’s as simply as pulling the wheel as far to the right as possible, which is very easy by grabbing the wheel and chainstay and squeezing them together.
How do I know if my spokes are tight enough?
Once the rim is free from blips and serious flat spots, check the tension of the spokes. Put your thumb around one spoke and your fingers around the spoke next to it and squeeze. The spokes should feel tight and firm. They should have just a little give when you squeeze them fairly hard.