Shimano freewheel removal

Asked by: Carrie Keith

Which way do you turn a freewheel to remove?

Quote from video: The entire wheel and turn counterclockwise. This applies an even pressure around the entire hub. That you can remove the freewheel.

How do I remove the freewheel without special tools?

Quote from video: I'm gonna fit the punch into the little dimple and then using the hammer I'm going to tap this clockwise. And get it to rotate. You'll probably tight to begin with. Then once you get it turning.

How do you remove a Shimano single speed freewheel?

Quote from video: Get a wide stand. And then should just pop. Right off. And you can twist. It all the way out. And you can easily just take your hand and twist it the rest of the way.

Are bike freewheels reverse threaded?

Freewheels are not reverse threaded. They screw onto the rear hub in a clockwise direction. The reason for the thread direction is security. When you pedal forward, the rear cogs rotate clockwise and thus tighten the freewheel onto the hub even more.

How do you remove a tight freewheel?

Quote from video: Because turning them clockwise just tightens them on and they can get you know after they've been on there for a long time.

Are all freewheels interchangeable?

No, freewheels are completely different from the cassette / free hub system and are not interchangeable. A freewheel includes the ratchet mechanism that allows the sprockets to rotate backwards as well as the sprockets themselves, and threads into the hub.

What is the difference between freewheel and freehub?

The term “freewheel” refers to the whole gear cluster with the coasting mechanism inside. The freewheel is screwed onto a set of threads on the right-hand side of the wheel’s hub. On a freehub system, the coasting mechanism is a sub-assembly of the wheel’s hub.

How many bearings does a freewheel have?

Typically you’ll have 10 bearings per side in the front and nine bearings per side in the back. Those are *common* sizes and counts, but you really won’t know for sure until you tear into the hub.

How do you replace a freewheel?

Quote from video: And turn it on get the threading started and should thread on pretty easy then just go ahead and spin it on till it's tight there. Then you can take the tool slide that on there.

How do you remove a fixed gear cog?

Quote from video: And on the other now to remove the lock ring on a fixed cog it's reverse threaded by that I mean to tighten it you turn it left or counter clockwise to loosen it you turn it right or clockwise.

How do you remove a single rear sprocket from a bicycle?

Quote from video: Place your luck ring removal tool onto the lock ring and loosen it once it's fairly loose you can probably do the rest by hand remove the lock ring from the wheel.

How do you take apart a freehub?

Quote from video: Just come in the other side just angle the screwdriver in and you kind of catch the backside of the dust cap and just tap it out just kind of work it around.

Why does my rear wheel not spin freely?

It might be that the hub is seized up from rust. You can check if it is the brake or not by loosening the caliper and spinning the wheel. If it spins freely it is the brake not the hub. If it is the hub you might need to get it regreased.

How do you get a stuck cassette out of a freehub?

Quote from video: My first fix is to use two chain whips to free the outermost cog. Put one chain whip on the outermost cog. And the other on the larger cog that is attached to the cassette. Spider rotate.

What’s the difference between a freewheel and a cassette?

Quote from video:

How do you open a bicycle free wheel?

Quote from video: Move this nut here. And then use the tool to unscrew the freewheel from the hub. And then I can lift the whole freewheel off the hub like that. Now for the next step here.

How do you adjust a freewheel?

Quote from video: And needs to be adjusted to adjust the angle you will need to slightly loosen bolts a B and C on each side of your freewheel. Once both sides are loosened. You are now able to adjust the angle bolt.

How do I remove freehub body thru axle?

Quote from video: I'm going to grab your free hand body put a glove on get a rag if you need to and basically want to pull the total is logotype shoulders and fall out like that.

How do you remove a cassette from a wheel?

Quote from video: Turn the remover counterclockwise. Using a large adjustable wrench or a one inch wrench. The noises from the serrations. And the lock ring in the first cog.

How do you remove a Shimano cassette without a chain whip?

Quote from video: It jab it through either side of a quick link in the smaller harder to get through ones doesn't really matter it's fraying. So long as it's through right.

What’s the difference between a freewheel and a cassette?

The freewheel is a single-unit and the act of pedaling tightens the freewheel to the hub. Whereas the cassette hub is a set of gears (cogs) that slides onto a cassette and is held in place by a lock ring.