Road bike shifter cable breaks too often: Shimano ultegra 10
5 min read
Asked by: Daniel Tucker
How long do bicycle shifter cables last?
the front shift cable also lasts years. the rear, it depends on which bike, but generally lasts 1.5 to 2 years. after the initial cable stretch, there is nothing to be done for a long, long time.
Can shifter cable snap?
It’s not uncommon. Some Shimano shifters are prone to breaking off near the head in the shifter and it can be a bugger to get that little bit out of the shifter. My wife has Ultegra 9sp and I have to replace her cable about every 12-18 months.
How do you get a broken cable out of a Shimano shifter?
Quote from video: It and then what you want to do is pull back your hood a bit and this cover here this bottom cover is remove that like so so it comes out. And then up in here you'll be able to see the cable.
When should you replace shifter cables on a road bike?
Quote from video: So perhaps it's becomes damaged in some way but generally you'll find that if your gear shifting is becoming heavy you need to replace both to do the job the only specialist.
How long does a shifter cable last?
With that being said, your shift selector cable doesn’t have a specified lifespan. It lasts as long as it lasts. In most cases, you should get at least five to eight years out of it, but premature failure isn’t uncommon.
Do bike shifters wear out?
Shifters can wear out too (if you ride enough), and most cannot be serviced back to health. But before you go sinking money into these more expensive components, best try a new cable/housing or get a second opinion.
What happens if my shifter cable breaks?
If the shift cable breaks, your shifter handle won’t return to its neutral position on its own. If the horizontal cable breaks, you won’t be able to shift. If the vertical cable breaks, you will only be able to shift to third or fourth gear.
How much does it cost to replace a shifter cable?
On average, it will cost approximately $300 to replace a gear shifter cable. The typical price range is between $200 to $600, though some car brands might be more expensive to repair. You can tighten and service a loose shifter cable for approximately $100.
What happens when shift selector cable goes bad?
If the shift selector cable is going bad, the indicator light or cable will not match the gear you are in. For example, when you move from park to drive, it may say you are in park. This means the cable has stretched to where it doesn’t move to the correct spot and the incorrect gear noted.
How do you change a Ultegra shifter cable?
Quote from video: You're looking at the front of the shifter there. If you just depress the brake to open it up you'll see the hole there just there put the cable through. There. Then just close the lever slightly.
How do you remove Ultegra shifters?
Quote from video: It up you know I've to unscrew it all the weight just loose enough to get the shifter loose you might need to loosen up a little bit more cause you're going to have a couple bends.
How do you fix a broken shifter cable?
Quote from video: So make sure you fit the lever. Over with the corresponding shape on the top end of that. And then with it installed correctly you should see this s-shape the inner part of that should be facing.
How much does it cost to replace a gear shift on a bike?
There can be a range of prices for replacement derailleurs, starting around $20 and going all the way up to $700.
How much does it cost to replace a gear shifter?
Quote from video: Похожие запросы
How often should you replace bike brake cables?
Keep in mind that even quality cables can fail if they were installed poorly. But if you have quality cables installed correctly, they ought to hold up fine for at least three years in my estimation. If you ride in extreme weather or crash a lot, you could need new ones much sooner, of course.
How long should bike cables be?
Some mechanics stick to a rule that the cables should be long enough so the bars can spin 180° before encountering resistance from the cables. I have had good luck with about 100° of rotation, and you will surely find a preferred cable length metric as you continue wrenching on bikes.
How do you change gear cables on a bicycle?
Quote from video: Cables. Take your new inner cable and thread it through the shifter. Putting it snugly into place thread. The first longer piece of outer cable on and lodge it into the correct place at the shifter.
How do you change a Ultegra shifter cable?
Quote from video: You're looking at the front of the shifter there. If you just depress the brake to open it up you'll see the hole there just there put the cable through. There. Then just close the lever slightly.
How much does it cost to replace a shifter cable?
On average, it will cost approximately $300 to replace a gear shifter cable. The typical price range is between $200 to $600, though some car brands might be more expensive to repair. You can tighten and service a loose shifter cable for approximately $100.