Older XTR cranks – replace or adapt?

Asked by: Robert Tundulawessa

How do you remove an XTR crank?

Quote from video: Turn it around until the pilot listens off. You can then remove the remaining by hand. And then take your tool off take the cap off and then you can slide your chain ring out ready put on the new one.

Are XTR cranks Carbon?

XTR FC-M9000 crank sets debut the most advanced mountain bike chain rings ever produced that utilize combined titanium, carbon and aluminium materials.

What are XTR cranks made of?

The new XTR crankset is based on Shimano’s typical hollow-forged aluminium crank arms and is available with chainrings from 30 to 38 teeth.

Are crank arms interchangeable?

No, cranks are not generally always interchangeable, but you probably can transplant the crank from the broken bike. First, do both bikes have 6, 7 or 8 sprockets in the rear cluster? If so, they use the same chain width and the spacing between the chainrings will be the same.

How do you install an XTR crank?

Quote from video: And then you just line up the ridge and then just press it into place. And then it just needs to slide the lock ring on you see the threads. Pretty deep on it just push that in place.

What is a direct mount crank?

A direct mount crank gets rid of the spiders leaving you a crank (arm) and a spindle—the chainring attaches to the inside of the crank using three bolts.

Which is better Shimano XT or XTR?

Considering the price difference between XT and XTR, Shimano has done a great job of trickling down the best of XTR into a more affordable and likely more durable group of parts. If you are looking for something even more value-oriented, Shiamno has also released SLX at the same time.

When did Shimano introduce XTR?

1991

Under such circumstances, Shimano began developing components dedicated to mountain bike racing and released XTR in 1991.

How long does an XTR cassette last?

I think if you run multiple chains ( I’m running 3) and keep the drivetrain clean the XT/XTR cassette should easily last ~6000km.

Is Deore XT better than SLX?

Compared to the SLX, the new XT feels more crisp and of slightly more high-end quality. However, the price will show if it’s really worth the upgrade. On a purely functional basis, there is little to complain about on the entry-level groupset.

How do you install a Shimano crank?

Quote from video: Press down your little plastic piece there with the retainer pin. And then reverse the process of tightening the bolts there you just want to alternate back and forth.

How do you change a Shimano 12 speed chainring?

Quote from video: And the appropriate tools then you can just push down with the clutch off on the ridge right here just push down to the chain goes slack.

How do you change a Shimano chainring?

Quote from video: It's simple to remove for the pliers. So you can go ahead. And remove that squeeze them together just remove the link. And depending on how old your chain.

Do carbon cranks make a difference?

And then there are those “upgrades” that, while cool, don’t really make much (or any) difference to the rider on the trail. Carbon cranks look the business and are usually lighter than aluminum arms, but the performance advantage is negligible.

Are carbon cranks fragile?

Crank boots



Carbon is more brittle and easier to damage or crack than aluminium, so plastic protective boots to shield crank tips against strikes are a wise investment.

Does MTB crank weight matter?

Lighter crank and same saddle will be your best improvement. As for the saddle, it’s really a personal item and you really shouldn’t give up comfort for less weight. Nothing is worth being impotent!

Is it worth upgrading a MTB crankset?

Absolutely! The main purpose of upgrading your crankset is for performance improvement and that means adjusting or replacing the crankset to get an improved experience. So yes, the crankset is always worth upgrading.

When should crankset be replaced?

Quote from video: Start to become hooked. Like little shark's teeth. And that is a surefire sign that you need to replace the chain rings.