How wide should a table base be?

Asked by: Lisa Blair

For example, you should be able to fit a rectangle table size of 36–42 inches wide and up to 60–70 inches long in a room measuring 10 x 12 feet.
…
Table Tops and Bases.

How wide should table legs be?

Dining table legs are 29″, which leaves about an inch for top thickness. If you’re planning on a top thicker than one inch, you can shorten the 29″ legs to maintain a finished height of 30″. The apron boards that connect the table legs to form the base are generally about ¾” thick and 4″ wide.

How much overhang should a table top have?

The overhang of a table is simply how much the table top projects out beyond the legs or base of the table. Too little of an overhang can make a table look stubby, while too much can make it look almost precarious! Table top overhangs of 2 to 4 inches are quite standard, and give a proportional look to the table.

How far should your legs be from the edge of a table?

Step 1: Determine where you’d like to mount the table legs and mark your position. The ideal distance from the edge of the table is 2 inches. Keep all four corners consistent to ensure a sturdy mount.

How wide should each table setting be at the least?

This means that your dining table needs to be a minimum of 28-30 inches wide for place settings and no shared space.



How much room does everyone need?

How much legroom do you need under a table?

The higher the tabletop, the more uncomfortable and formal the table feels. Provide about 24″ of leg room below the table (height from floor to bottom of table rail) and at least 12″ for knee clearance (projection of table top beyond table leg).

How wide should a place setting be?

One of the first rules of formal table setting is the 24-inch rule. This refers to the ideal amount of space from the centre of one plate to the centre of the next plate, allowing the guest plenty of elbow room. The two pictures that follow illustrate this.

How much support does a table top need?

Big Enough Base



As a general rule, a glass tabletop should not overhang its base by more than one-third of its width. That means that a 54-inch-diameter glass table should sit atop a base that’s at least 18 inches in diameter, allowing for a maximum of 18 inches of overhang at all sides of the base.

How thick should dining table legs be?

Consider leg width



A dining table with 4 ½” wide legs and a ¾” thick top will feel wrong and imbalanced. Put those same wide legs under a 1 ¾” thick top, and everything falls into place.

How thick should table top be?

1 ½” to 1 ¾” thick

2” thick slabs will generally yield a top finished to 1 ½” to 1 ¾” thick. That’s plenty for most tables. If you do want a thicker top, just be aware that the extra bulk is increasing your costs. (Note: many lumber dealers measure wood thickness in quarters of an inch.

What are the 3 types of table setting?

The three most common types of table settings are formal, casual, and basic. Each place setting includes the utensils and dinnerware pieces that would normally be used with the corresponding style of dining.

How wide should a 4 person table be?

between 36″ and 40″ wide

Most rectangular tables are between 36″ and 40″ wide. A table that seats four should be about 48″ long. To seat four to six people, look for a table that is at least 60″ long. For six to eight guests, your table should be at least 78″ long.

Is 36 inches too narrow for a dining table?

Any width narrower than 36-inches will cause problems due to a lack of space for table settings. A standard rectangular dining table is 36″ X 60″ to provide comfortable seating of four to six people.

What width do you need for a dining table?

A standard plate is about 10.5 inches wide, and a typical table setting is 15 inches wide to accommodate the plate and some room for a drink behind the plate. Therefore, 30 inches is the minimum comfortable width for a dining table.

How wide should a rectangular dining table be?

Now approaching 4ft wide, this table gives more than enough leg room and serving space above. At 122cm, or roughly 4ft, this is about as wide as you would want to go for a rectangular shaped table.

Is 48 inches too wide for a dining table?

Table Width. Most dining tables are between 36″-48″ wide, depending on the length of the table, which leaves room for place settings and serving pieces. Keep in mind that dining tables wider than 48″ will be more difficult to reach across.

How wide should a 7 foot dining table be?

Circular Dining

How wide should a farmhouse table be?

What size farmhouse table do I need? The ideal dining table size for you depends upon the number of people you seat most days, as well as the size of your room or dining area. This chart shows recommended table sizes based upon number of people for both round tables and rectangular tables with a width of 36”- 42”.

How much room do you need for a 6 person dining table?

A 6 person dining table should be at least 78″ long. That’s 6 feet 6 inches. The rule of thumb is to allow 24″ of space per seat at your dining table for casual seating. For more formal meals, you should allow 30″ per seat which still works with a 78″ table.

How wide should a 10 foot table be?

Choosing the Right Dining Table Size

What kind of wood should I use to build a farmhouse table?

Our Top Pick For Wood for Farmhouse Table: Maple. After looking at the different options, maple stands out among the rest, thus making it our consensus pick. Its strong resistance against scratches and dents is second-to-none.

How much does it cost to build a farmhouse table?

Building a farmhouse table is a relatively easy project that will take about one weekend and cost less than $200.

How do you make a farmhouse table for beginners?

And you only need two tools a drill and a saw to build. It. All you'll need to build this table is six two by fours that are eight feet long and six two by six that are scuttling.

How do I keep my farm table from warping?

Experts recommend certain practices for drying wood to prevent warping, such as:

1. Don’t allow partially dry lumber to quickly regain moisture.
2. Don’t dry lumber too slowly (doing so could worsen any bowing and other warping)
3. Don’t over dry lumber, which can lead to cracking, splits and end grain checking.

What plywood will not warp?

Marine plywood is specifically made to be void free. It is also pressure treated. These two processes help to make it highly resistant to both rot and warping. Likewise, many types of cabinet grade plywood are void free, especially those with more layers of veneer in them.

Is a table apron necessary?

You can ignore the aesthetic function if you choose, but if you want your table to last you have to consider the structural functions. For example, without aprons to support the width of the table, the joints between the boards in the top would experience much more stress than they do in a regular table.