How thick should a concrete slab be for an above ground pool?
3 min read
Asked by: Kelly Butler
4 to 8 inches thick4 to 8 inches thick. Even a low-strength, 4-inch concrete slab can withstand a weight of 1,700 kilograms per square centimeter, or 24,123 pounds per square inch. This is more than strong enough to support an 18-foot by 4-foot-deep round pool.
How thick is concrete slab around pool?
To be structurally sound, a concrete pool shell should generally be 6 inches thick. Depending on the engineer and the soil condition, it may be more. (On top of that, the plaster interior finish should be at least ⅜ inch thick.)
Can an above ground pool be set up on concrete?
Many wonder though if above ground pools are exclusively used over grass, sand, or soil only and if installing it over concrete is impossible (for fear of it getting punctured). The good news is, yes, you can install your above ground pool on concrete if a sand or soil base is not possible.
How much weight can a 2 inch slab of concrete hold?
A 2-inch concrete slab can hold 750 psi of weight. The stronger the slab will be, the more concrete is normally put at a thickness of 2 inches or more. A slab’s thickness is most commonly four inches.
Can you put a Intex pool on concrete?
Can I put my Intex Pool on the driveway or concrete patio? YES. As long as your driveway or patio is level, this is a great place for an Intex Pool.
How thick should concrete pool floor be?
6 inches thick
The durability and beauty of concrete are two reasons for this. Another is the infinite variety of shapes into which concrete can be molded. Forms for pools should be set for casting walls at least 8 inches thick; floors should be at least 6 inches thick.
How do you build a concrete slab for an above-ground pool?
What do I do to level the concrete. Okay so if you're pouring concrete to put a pool on a course you're an omega-level laser. Level I would hope.
How much does it cost to pour a 8×8 concrete slab?
A typical concrete slab will cost between $113 and $126 per cubic yard (27 cubic feet) or $5.35 to $6.17 per square foot on average.
Concrete Slab Prices By Size.
| Slab Size | Square Feet | Average Cost Installed |
|---|---|---|
| 8×8 | 64 | $395 |
| 10×10 | 100 | $617 |
| 12×12 | 144 | $888 |
| 15×15 | 225 | $1,388 |
What’s the best thing to put under an above ground pool?
By far the best material to place under a swimming pool liner is Armor Shield or Gorilla Pad. These materials are breathable allowing moisture to escape and are extremely tough, keeping insects and moles from coming through and piercing the vinyl pool liner.
What is a good base for an above ground pool?
Nothing (Natural Ground)
If you opt to not use concrete or at least sand as a primary base for your above ground pool, I recommend at least using a pool pad or foam tiles and using the most stable area of the yard possible. Additionally, make sure that you kill the grass before placing the pool on the ground.
How many bags of sand do I need for an above ground pool?
So how much sand will you need? You will need at least 2 inches (5.08 cm) of sand for your above-ground pool lining. For an average 15 × 30 foot (4.5 x 9.1 m) rectangular pool, you will need around 2-3 cubic yards (1.53 – 2.29 cu m) of sand or approximately 4 tons (3600 kilos).
Is an above ground pool worth it?
An above-ground pool is, by far, the least expensive option for a pool. Kids love them, and built-in fencing and locking gate options make them safe. The main disadvantage of an above-ground pool is that it generally adds no value to your home.
