How much space do you need around a table for chairs? - Project Sports
Nederlands | English | Deutsch | Türkçe | Tiếng Việt

Project Sports

Questions and answers about sports

How much space do you need around a table for chairs?

7 min read

Asked by: Anil Benjamin

The general rule of thumb is to allow 24 inches of space for every person gathered around your table. Most side chairs range between 16” wide and 24” wide, with arm chairs being as wide as 30”.May 18, 2018

How much space should be between a seat and a table?

10-12 inches

For optimal leg room, allow 10-12 inches between the seat of your chair and your underside tabletop. Tip: For armchairs, be sure to leave to leave at least six inches between the armrest and the underside of the table.

How much space should be between dining table and wall for chairs?

Distance between the walls and the dining room table: Ideally, provide at least 36″ between the dining table and any walls or other furniture on all sides to allow seats to slide out easily.

How much space do you need behind dining chair?

If the cabinet is wide enough that it would sit directly behind two seated guests, ideally, there will still be 36 inches of space between their spot at the table and the china cabinet.

How much space do you need for a 6 seater dining table?

Rectangular and Oval Dining

People 2 No Shared area 2′ x 2’6″ (61 x 76cm) Minimum Size (with shared area) 2′ x 3′ (61 x 91cm)
4 4′ x 2’6″ (122 x 76cm) 4′ x 3′ (122 x 91cm)
6 6′ x 2’6″ (183 x 76cm) 6’6″ x 3′ (198 x 91cm)
8 8′ x 2’6″ (244 x 76cm) 8’6″ x 3′ (259 x 91cm)
10 10′ x 2’6″ (305 x 76cm) 10’6″ x 3′ (320 x 91cm)

How much space does a 60 round table with chairs require?

For banquet style setup using large round tables you should leave a space of 60″ minimum. This is 2 x 18″ for the seats, and 24″ room in between the chairs. The picture to the right illustrates this.

How much space do you need from a table to the wall?

36 inches

How Much Room Is Needed Between A Dining Table And A Wall? The distance between a wall and the dining room table should be 36 inches or 3 feet. This measurement is taken from the edge of the table to any walls or other furniture that sit behind chairs.

How long should a table be to fit 4 chairs on each side?

about 48″ long

A table that seats four should be about 48″ long. To seat four to six people, look for a table that is at least 60″ long. For six to eight guests, your table should be at least 78″ long.

How big of a table can I fit in a 12×12 room?

You have room for up to a 60″ round table with plenty of room to pull chairs back and to walk around the table. This will accommodate 8 to 10 people. A 48″ round table will fit 6 comfortably, and you could buy one with one or more leaves to expand it if you need to accommodate larger numbers of people.

What size dining table fits in a 10×10 room?

A room that’s 10 feet by 10 feet can fit a table up to 48 inches by 48 inches.

What is a good width for a dining table?

36-40 inches

Most dining tables are made according to standard measurements. The standard width is 36-40 inches while standard height is 29-31 inches.

Do round or rectangular tables take up more space?

Space Saving

If you have a small house or dining room, bear in mind that round tables take up less space. They have a smaller surface area than their rectangular counterparts so will fit into tighter spaces much more easily.

Do dining chairs have to fit under table?

RULE: Chairs should be able to slide under the table with ease with or without arms. Ideally, there should be 7″ between the chair arm and apron of the table but that’s not a hard rule. Just for your reference dining chair seats are usually 18″-19″ high and dining tables are typically 30″ high.

How much space does a 72 round table with chairs require?

The circumference of a 72-inch table is about 226 inches. In general, to sit comfortably most people need about 24 inches of table space.

How much room do you need for a 42 inch round table?

Clearances and Walkways. While recommendations vary, a clearance of 36 to 42 inches from table edge to a wall or other furniture allows adequate space for seating plus a walkway behind the diners. Using this guideline, a dining room 10-by-12-feet long accommodates a table 36 to 42 inches wide and 60 to 72 inches long.

Can you fit 6 chairs around a 48 table?

A round 48″ table top can usually accommodate up to 5 or 6 people, while a 48″ square table can comfortably fit 8 guests.

How much room do you need for a 48 inch round table and chairs?

As a general rule, you need about 36 inches (3′) of space for a chair. It won’t take up that much space when drawn up to the table, but you need to be able to push the chair back to get up. Hence a 48-inch diameter round table actually needs a space of 10 square feet.

Is a 48 round table too small?

Round Dining Tables

A 48″ round table can seat 4-6 people comfortably. A 60″ round table can seat between 6-8 people comfortably.

How much space do you need for a 54 round table?

You need at least 3 feet (36”) around the perimeter of the table. That means you need to add 72” to the width and length of the table.

Can a 54 inch round table seat 6?

54″ Round Dining Table. For a formal meal, a 54″ round table will seat 5 people comfortably. For a casual meal, you can sit 6 people around the table.

Is it good to have a round dining table?

Better Flow & Space

Because there are no corners to a round table, it creates more space so people can walk around and get to their seat. A round table is very well suited to a formal style dining rooms as well as a more open floor plan where the dining area is off to the side in a larger room.

What takes up less space round or square table?

round tables

Space Saving
If you have a small house or dining room, bear in mind that round tables take up less space. They have a smaller surface area than their rectangular counterparts so will fit into tighter spaces much more easily.

Which shape dining table is best?

Definitely the most common shape (because most dining rooms are rectangular), rectangular dining tables are great because they can seat a large number of guests for large-scale entertaining. Their linear shape also allows for ample room to walk around the table.

Can you put a round table in a rectangle room?

The Shape Factor

Similarly, round dining tables won’t look good in a rectangular room! This is particularly apparent if the area is distinctly elongated and the table is especially large, because the sides of the room would look uncomfortably narrower than the space on the other ends.

What size table fits in a 10×10 room?

A room that’s 10 feet by 10 feet can fit a table up to 48 inches by 48 inches.

How big of a table can I fit in a 12×12 room?

You have room for up to a 60″ round table with plenty of room to pull chairs back and to walk around the table. This will accommodate 8 to 10 people. A 48″ round table will fit 6 comfortably, and you could buy one with one or more leaves to expand it if you need to accommodate larger numbers of people.

Are round tables good for small spaces?

Great for small spaces: Round tables go well with square-shaped dining rooms, and they’re also great for smaller spaces or a combined living/dining room area. However, the average round table can only seat two to four people (though some circular tables do have extension leaves if needed).

Why are round dining tables better?

Because there are no corners, a round dining table generally has a smaller footprint than a square or rectangle making it suitable for smaller spaces. They also tend to fit more people around when you have additional guests.

Can you put a round table in a square room?

Round. A round table works well in small rooms and smaller square shaped rooms. It creates a cozy and intimate setting, so it’s the best shape for a small group of people.