How much liquid chlorine do I need to open my pool?

Asked by: Dinesh Breon

The most important factor though is the size of the pool. You’ll need about 52-104 oz of liquid chlorine per 10,000 gallons of water. This amount should get the chlorine level to between 5 and 10 ppm.

How much liquid shock Do I need to open my pool?

The general recommendation is to use 1 pound of cal hypo shock for every 10,000 gallons of pool water, and 10 ounces of sodium hypo with around 12.5% chlorine to sanitize your pool. Make sure the pool water is at its normal level.

How much liquid chlorine do I need for 500 gallons?

In a clean, freshly filled 500 gallon wading pool, add a quarter cup of unscented household liquid chlorine bleach to the water. Then, at the end of each day, test the water and add an additional 1/8 to 1/4 cup, depending on the reading.

How much chlorine should I start with?

INITIAL STARTING DOSAGES :



Maintain chlorine at a minimum of 1.5 ppm and up to 3 ppm. The more swimmers you have and the warmer the water is, can double your pool’s chlorine consumption. Add whatever amount of chlorine it takes to maintain a 1.5 ppm chlorine..

Is liquid chlorine better than shock?

Liquid chlorine is generally less costly than granular shock and comes in refillable containers, where granular shock does not. Liquid chlorine does not need to dissolve in your water as it is already in liquid form. In addition, liquid chlorine is non-scaling and leaves no residue.

Can I shock my pool with liquid chlorine?

Sodium hypochlorite (also known as liquid chlorine) is another frequently used option for shocking pool water. This is a common choice in pool shock because you can pour the solution directly into the pool without having to dissolve the chlorine in water beforehand.

How much liquid chlorine equals a bag of shock?

For many residential pools, or if you just want a ballpark estimation on how much pool shock you will need, simply follow the directions on the packaging. Often, it will look something like this. 12.5% Liquid Chlorine Pool Shock – Normal Dosage: 1 gallon of shock per 10,000 gallons of water.

How do I use liquid chlorine in my pool?

Amount of chlorine around the edges of the pool. Do this low and slow. Step 4 balance ph slowly add 10 to 16 ounces of muriatic acid per gallon of chlorine added around the edges of the pool.

Will liquid chlorine raise pH?

Using liquid chlorine raises the pH of the water.



Liquid chlorine does not raise pH. When added to water, liquid chlorine (which has a pH of 13) makes HOCl (hypochlorous acid – the killing form of chlorine) and NaOH (sodium hydroxide), which raises pH.

Can you put too much chlorine in a pool?

Having too much chlorine in your pool water can be dangerous. Exposure to high levels of chlorine can cause lung irritation, skin and eye damage, and provoke asthma. Not only is it bad for your health, but it can be bad for your pool due to the increase in chlorine.

Is it better to use liquid chlorine or tablets?

Liquid chlorine is a much better choice than tablets for shocking. It is going to go to work right away and get your chlorine levels high in a short time. Saying that, it is an expensive way to do it. Calcium Hypochlorite (cal-hypo) is a much more cost effective way.