Nederlands | English | Deutsch | Türkçe

Project Sports

Questions and answers about sports

How much does it cost to Replaster a pool in Phoenix?

7 min read

Asked by: Stacy Roberts

Its cost would typically run from $640 up to $726 based on the size, shape of the pool and local labor rates. If you want to get a pool resurfacing Phoenix using pebble or quarts aggregate finish, it will cost you around $3500 up to $8500 for a rough finish and a staggering $5000 to $10000 for a polished finish.

How much does it cost to Replaster a pool in Phoenix Arizona?

Plaster is also very easy to maintain, and it will 10 to 15 years if properly installed. Getting a new plaster pool surface will cost you anywhere from $3,000 to $5,500 if you have an average sized pool.

How often should you Replaster a pool?

Every 10 Years

On Average, Replastering is Every 10 Years



So how often do you need to replaster a pool? The short answer is about every 10 years. However, it’s important to consider the factors mentioned above, as they are typical signs that your pool needs to be replastered.

How long does it take to Replaster a pool?

about 5-7 days

How long does it take to resurface a pool? Pool resurfacing usually takes about 5-7 days to complete. The pool resurfacing process can be hindered by weather, however, and may take up to 14 days in certain cases.

How long does a plaster pool surface last?

15-20 years

When it comes to durability, both plaster and pool paint are built to hold up against the chemicals in your pool and natural conditions outside of it such as harmful UV rays; however, most pool plaster lasts 15-20 years, while epoxy pool paint – the longest-lasting type of pool paint on the market – needs to be …

How much more is pebble Tec than plaster?

Thanks to its relatively simple look and material makeup, pool plaster is a lot less expensive than Pebble Tec®. White plaster costs about $4 for every square foot of pool surface. Meanwhile, a pebble finish, like Pebble Tec® or Pebble Sheen®, can easily cost $10 or more per square foot.

How do you know when your pool needs to be resurfaced?

Before you call for help, learn the ten signs that you need help from a pool resurfacing service.

  1. Plaster Flaking or Peeling. Maybe you’ve noticed the plaster is peeling along the steps or floor of your pool or spa. …
  2. Surface Stains. …
  3. Roughness. …
  4. Check Cracks. …
  5. Plaster Discolorations. …
  6. Structural Cracks. …
  7. Rust Stains. …
  8. Loss of Pebbles.

What happens if you don’t Replaster a pool?

Either due to age, excessive acid washing, or a poorly done previous plaster job, the surface of the pool may become rough. This can cause snagged swimsuits, scraped skin, and algae that is extremely difficult to remove.

What happens if you don’t resurface pool?

If you don’t resurface the pool, which is necessary because it is always exposed to weather, cracks and an unevenness in the pool surface will occur and this could lead to algae stains, water leaking and injuries from the uneven surface.

Can you Replaster a pool yourself?

It will chip and wear away more easily, and when it does, you will need to repair it. If there’s a reason to use paint over plaster, it’s that the application process really is a lot easier. While you could paint on your own, replastering is something that only the most industrious homeowners take on.

Can a pool leak through plaster?

These cracks can be vertical as well as horizontal and can be found on the sides or the bottom of the pool. As they run through the plaster as well as the concrete, they tend to be more menacing and can cause severe pool leaks if not taken care of.

Why does pool plaster crack?

The most common cause for crazing is if the pool is finished on a hot, dry or windy day, or if it took too long to fill the pool. Check cracks and crazing are quite normal and very rarely, if ever, leak. If the crazing is unacceptable or seem to be more than normal, consult the plaster company.

What is the difference between gunite and plaster?

A gunite pool indicates the underlying STRUCTURE. Plaster is the final FINISH on top of the gunite structure. All inground gunite pools have the same structure (gunite or dry shotcrete – synonymous terms). The final stage of construction entails applying an interior finish, such as plaster.

Is Pebble Tec better than gunite?

Pebble Tec is on the higher end of the cost spectrum. Pebble Tec is a mix of large pebbles, stone aggregate, and cement. This is the most durable of the plaster pool types as its surface last from 15 to 20 years +. Pebble Tec is the top choice for gunite pool buyers.

What is the longest lasting pool finish?

Tile Finishes

Tile Finishes



Though tile is the most expensive pool finish and takes longer to install than plaster and aggregate, it’s the longest lasting pool surface. With proper application and minimal maintenance, tiles should never need to be replaced. Tile pool finishes come in ceramic, porcelain, glass and stone.

What is the cheapest pool finish?

Plaster finishes are the cheapest and easiest to install, but they lack durability. Aggregates can be the most attractive but are slightly more expensive and more time-consuming. Tile finishes are the most expensive and take the longest, but their durability is top-notch.

What is better than Pebble Tec?

River rok is good alternative, stones are somewhat smaller and smoother than pebble tec. Can also custom the colors to your liking.

Is quartz better than Pebble Tec?

Quartz base products are more cost efficient. Quartz has a tendency to crack more frequently than pebble. In the long term, pebble is more durable and has less discolorations. If the design calls for plaster to be exposed above the water line, pebble will be the only option.

How do you Replaster an inground pool?


And rental and welcome to my how to plaster a pool video. It is necessary to put a finish on a concrete structure pool because the concrete structure is not waterproof and will leak.

Can you plaster over old plaster pool?

If a pool that is going to be replastered has more than one layer of plaster, the outer layers must be completely removed. Anything less than this is a bad practice that can lead to failure in your investment. A replaster should only be performed on the original plaster layer.

How much does it cost to epoxy a pool?

Epoxy. Epoxy paint is another popular finish choice for fiberglass pools and other options such as concrete. It can take a few weeks to cure but produces a smooth, beautiful coating that looks good in any swimming pool. Epoxy is also cheaper than many other finishes, costing around $1,500 per application.

How long does White pool plaster last?

10 to 15 years

Standard white plaster will do what it is supposed to. It will be watertight and serve its function for that 10 to 15 years depending on maintenance. But pebble finishes, properly installed and maintained, will last 20 to 30 years or more. It is the most durable finish our industry has to offer.

What does a pool look like with white plaster?

It's a relatively small pool. You can see it just adds to the style of the house. And it kind of matches the modern look the house here. And even the white plaster is the most economical way to go.

Why does a white pool look blue?

Sunlight is white, which is made up of all the colours of the spectrum. The molecules in pool water absorb light from the red end of the spectrum when sunlight falls on the water. By removing the red, the light which ends up being reflected has a slightly blue hue which can vary in richness by water depth.

How long does it take to plaster an inground pool?

Replastering an average-sized pool takes us between 4 and 7 days on average.

What happens after a pool is plastered?

Curing plaster refers to a maturation process of the new plaster finish when it strengthens and seals. The pool finish will start to cure immediately after mixing. Sixty percent of the curing process occurs in the first 4 weeks and will continue over the next 8 to 10 months.

Can you retile a pool without plastering?

​Yes. The thinset and grout used to install the new tile will fall onto the pool surface. This is not easily brushed off. The pool will likely have to be pressure washed and possibly acid washed after the retile if you are not replastering the pool as well.