How much does a 10 ft aluminum jon boat weight?

Asked by: Maria Bryant

10-foot aluminum Jon boats have an average dry hull weight of 95 pounds or 43 kgs. This average was calculated and based on the following models and manufactures.

How heavy is a aluminum Jon boat?

In short, most Jon Boats are going to weigh between 400-500 pounds (180-225 kg) which includes both the aluminum hull as well as the engine. Some will weigh as little as 130 pounds (59kg) in total for the 10 foot lengths, while 20 foot boats will weigh upwards of 1,200 pounds (544kg) or more.

What is the weight capacity of a 10 foot Jon boat?

Without the engine, a Jon boat long 10 feet (3 m) will weigh about 100 pounds (45.5 kg). With a 5 HP, it can reach a top speed of 5 mph (8 km/h). You can expect it to carry 300 to 350 pounds (136 – 159 kg), including equipment and people.

How heavy is a 12 foot Jon boat?

A 12 foot Jon Boat will on average weigh about 120 pounds (54 kilos) not including the motor, and hold around 400-450 pounds (200 kilos) of people and gear.

What’s the biggest motor you can put on a 10 foot Jon boat?

10′ Jon Boat
Generally speaking, a 3 HP motor is the more desirable engine for these jon boats although some models can take up to 5 HP. A 3 HP engine would have a 5mph top speed while 5 HP engines can have up to 10mph. These boats can do for light fishing or transport across small distances.

How much is a 10ft jon boat?

A 10ft jon boat is the most basic of jon boats, offering a no-frills economical means for the sportsman to get on the water. Initial purchase prices range from $550-800 but will generally only include the hull itself.

How heavy is a jon boat with trailer?

You can expect an average jon boat weight to be about 500 pounds (227 kg). Most jon boat trailers weigh about 400 pounds (181 kg). The average boat weight with trailer is approximately 900 pounds (408 kg).

How wide is a 10ft jon boat?

On average, the width of a Jon boat will fall between a beam width of 48 inches for a 10 foot, 60 inches wide for a 12-foot boat, and about 70 inches wide for a 14-foot Jon boat. Typically, the length falls between 8 to 24 feet, inches ranging between 32 and 60.
Feb 19, 2019

How do I make my jon boat hold more weight?

Add flotation pods
Because the stern houses the heaviest items on a jon boat like the gas tank, engine, and battery, you can add buoyancy to the boat by counteracting the weight on that side of the boat by adding flotation pods. The flotation pods should be added on the outside of the boat, one to each side of the aft.

Does adding foam to a boat help it float?

Flotation foam can be an important addition for sink-proofing, thermal insulation, and soundproofing such boats as sailboats, jon boats, aluminum v-hull fishing boats, speed boats, canoes, bass boats, and pontoon boats. It can also help keep floating docks riding higher in the water when loaded down with weight.

Who makes a 10 foot jon boat?

Lund®

Lund® Jon Boat 1040 – 10 Foot Small Boat for Ponds and Panfish.

Can I put a 50 hp on a jon boat?

What’s the max horsepower for a Jon Boat? Maximum horsepower is based upon the size of your boat, with the range being around 3-5hp for small 10-12 foot boats, all the way up to 60-75hp for longer 18-20 foot Jon Boats. You should follow your boat manufacturer’s suggested horsepower for the specific size of your boat.

How fast can a jon boat go?

10-15 mph is a good expectation for this boat size. This boat length will usually allow for a 5hp engine, with some models permitting up to 10hp engines. The 5hp engine will put you in the 10mph range, while the 7.50-10hp engines will push you 15+ mph.

Why is it called a jon boat?

Because the boats were stable and easy to construct, they became favorite transportation for many fishermen. Apparently, one of the fishermen named his flat bottomed boat “john boat” after himself. And the name took off from there especially since “Jon” or “John” is a very common name in Scandinavia.

How fast does a 10hp boat motor go?

10 HP Outboard: Speed & Runtime