How much dirt is needed to fill in a pool?
7 min read
Asked by: Sarah Jackson
To know how much fill dirt you will need, measure the length, width, and depth of the pool (use feet as your unit of measurement). Multiply each measurement together, then divide that number by 27 (the number of cubic feet in one yard). The result is how many cubic yards of fill dirt you will need to order.
How much dirt would it take to fill a pool?
For example if our pool is 30′ long, 20′ wide’ and 6′ deep, it has a total volume of 3,600 square feet (30x20x6). The total square footage divided by 27 is 133.33, this indicates that your pool will need 133.33 cubic yards of material to fill it in.
How much dirt does it take to fill a 20000 gallon pool?
Take the amount of gallons, say 20,000 / 7.48 = 2674 cubic feet. 2674 cubic feet equals = 99 cubic yards.
How do you calculate dirt fill?
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard). The final figure will be the estimated amount of cubic yards required.
How much does it cost to fill a pool?
$4,000 – $16,000 Inground Pool. The average cost to fill in an inground pool is $4,000 to $16,000 for full demolition or $2,000 to $10,000 to fill in with dirt. An above ground pool removal costs $300 to $800, or $2,500 with a deck.
Can I fill my inground pool with dirt?
Filling your pool with dirt is the fastest and most affordable way to get rid of a pool because there’s no need to remove your concrete or metal shell. This saves on both labor and hauling costs. However, filling a pool with dirt is still a delicate process that requires careful preparation, drainage, and demolition.
How do you fill an unwanted inground pool?
How to fill in an inground swimming pool:
- Power off the pool by disconnecting the breaker box.
- Drain the pool.
- Drill holes at the bottom of the pool to prevent water collection.
- Demolish side walls. …
- Backfill and compact. …
- Finish with soil & sod.
What is the cheapest way to fill a pool with water?
What is the cheapest way to fill my pool? While it may not be the fastest way, using a garden hose and city tap water is the cheapest way to fill your swimming pool. The average American family uses 12,000 gallons of water per month. And the average-sized swimming pool is around 15,000 gallons.
How do you permanently close a pool?
The answer would depend on the type of pool that you have but pretty much across the board you're going to find out that you can't close a pool permanently.
Is it OK to fill a pool overnight?
Although it may take several hours to fill your pool completely, make sure that someone is available to continuously checking on the pool. It is never recommended to leave your home during this time or to fill your pool overnight.
What is the best way to fill up a pool?
So what you want to do is fill it up to about 3/4 of the way up that opening of your of your skimmer box that's the right level so you know where you could stop it at.
How long does it take to fill a pool?
The average pool can take 12-24 hours to fill and that is only if you have a few hoses chugging away. When your family is chomping at the bit to dive in, that may as well be an eternity. Forget this plan if you are using well water, you will burn up your pump or leave your home without water for days.
Will the local fire department fill my pool?
Generally, fire departments will not fill a residential swimming pool. Filling the pool could be a potential liability, plus, the water the fire department uses for your pool isn’t putting out fires and saving lives.
What is the cheapest way to fill a pool with water?
What is the cheapest way to fill my pool? While it may not be the fastest way, using a garden hose and city tap water is the cheapest way to fill your swimming pool. The average American family uses 12,000 gallons of water per month. And the average-sized swimming pool is around 15,000 gallons.
How many cubic yards is an average pool?
The size of an Olympic Swimming Pool is about 3,300 cubic yards. According to the Fédération Internationale de Natation (FINA), a swimming pool for Olympic and world championship events must measure 50 m by 25 m with a depth of at least 2 m for a total volume of 3,300 cubic yards.
How much does it cost to fill in a pool with dirt Australia?
The average cost for T & D Earthworks to remove an old fibreglass pool, dispose of the pool at the local council tip, deliver soil to site and fill in the hole is generally around the $5,000 – $6,000 mark.
How do you permanently close a pool?
The answer would depend on the type of pool that you have but pretty much across the board you're going to find out that you can't close a pool permanently.
Does filling in a pool decrease home value?
Unless your geographic location allows for 6 or more solid months of swimming weather, your pool is less than 15 years old, and most of the neighborhood has a pool, you can expect your pool to decrease your property value.
Can I leave my pool empty?
Once water is removed (and subsequently, the interior hydrostatic pressure), if there’s an influx of groundwater, it will push the pool up and out of place. As a general rule, you shouldn’t keep any pool empty for longer than it needs to be. Get the work done that you needed to do and refill it as soon as possible.
What happens if you don’t open inground pool?
A pool isn’t designed to be stagnant during the warm months of the year, and pool covers deteriorate faster in strong summer sunlight. Leaving the pool closed all summer is a guaranteed way to end up with a green, smelly mess and permanent stains or damage to the pool surfaces.
Can you cover an empty inground pool?
Winter Pool Covers also offer protection for an empty pool. Made out of polypropylene fabrics and double webbing, they offer safety and keep most debris from even getting into the pool. The cover is attached to anchors that are drilled into the deck and secured with springs.
Can you cover a pool permanently?
IS THERE A WAY TO COVER IT PERMANENTLY? It’s not a good idea to fill in or permanently cover an old swimming pool. A better solution is to build a temporary deck over your swimming pool so you can remove it if you decide to sell your home later. A pool can add value to your home.
Can I leave my pool up all winter?
It’s possible to leave your above-ground pool up all winter with the water in it, since draining it completely may cause it to collapse.
How much does it cost to drain a pool for winter?
Drain the water down to no more than 6 inches from the bottom of the skimmer if you plan to use a standard floating winter cover. Use your pool filter, switched to the “Drain” setting, to empty the pool water.
What happens if you don’t cover your pool in the winter?
Pool Closing Mistake 1: Skipping the Pool Cover
For one thing, an uncovered pool will become a catch-all for leaves and debris. Those leaves will spend all winter stewing away in the bottom of your pool. In the spring, you’ll be welcomed with a nasty, sludgy mess.
How do you winterize a pool?
Winterising your pool procedure:
Lower water level to around 150mm (6”) below skimmer and close the valve for the skimmer(s) on the plant filter and circulate through the main drain. Shock treat the pool keeping the circulation system on, to increase the chlorine level to 5-10mg/l.
How often does a pool need to be cleaned in winter?
In the winter, you should balance your pH, pool water weekly at a minimum; spa users are recommended to check their water chemistry every two to three days. In addition, use an algaecide to kill any existing algae and prevent new blooms during the winter.
Should I run my pool pump in the winter?
Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.
