How much chlorine do I need to start my pool? - Project Sports
Nederlands | English | Deutsch | Türkçe | Tiếng Việt

Project Sports

Questions and answers about sports

How much chlorine do I need to start my pool?

4 min read

Asked by: Tarek Tuttle

It’s recommended you add a gallon of liquid chlorine or pound of granular chlorine for every 5,000 gallons of water in the pool. You can also add more chlorine at the end of the opening process.

How much chlorine do I add to my pool for the first time?

If you’re adding chlorine for the first time, add the amount of product required to achieve a free available chlorine level of 2 to 3 ppm. The instructions will let you know how much to use to raise levels by 1 ppm per 10,000 gallons (38,000 L) of water.

How do I chlorinate my pool for the first time?

It's high don't make the mistake of dumping a ton of cyanuric acid in there you want to get to your level to the ideal on the low range between 30 and 50 all right so here's what you're gonna do.

What chemicals do you put in a pool for the first time?

Chemicals Needed for Pool Start Ups

  • Stain & Scale Preventer.
  • Granular Shock Chlorine.
  • Chlorine Tablets.
  • pH Increaser and/or pH Decreaser.
  • Alkalinity and/or Calcium Increaser.
  • Cyanuric Acid (Stabilizer)
  • Algaecide and Clarifiers if needed.
  • Complete Test Kit or Test Strips.


Do you shock a pool when you first fill it?

So you shock the pool allow the filter to run for about ten hours one full turnover of the water that has to be sure that all the water is treated and then make another do another test.

What to do when you first fill your pool?

What Do You Do After an Above Ground Pool Is Filled With Water?

  1. Step 1: Learn about how to prevent drowning and pool chemical injuries. …
  2. Step 2: Turn on the filter. …
  3. Step 3: Vacuum and skim off debris. …
  4. Step 4: Test the water, and then test it again. …
  5. Step 5: Enjoy your pool, but safely!


How much chlorine do you put in a pool per gallon?

The basic balance of chlorine to water is between 1 and 3 ppm, or 0.00013 ounces of chlorine per gallon of water.

Can I shock my pool with just chlorine?

Types of Pool Shock. There are several types of products you can use to shock the pool. Typically, you will not use regular chlorine tablets as pool shock chlorine. Calcium Hypochlorite: Also referred to as cal hypo, this chemical is one of the least costly and most convenient ways to shock your pool.

What is the difference between shock and chlorine?

Chlorine is a sanitizer, and (unless you use Baquacil products) is necessary for maintaining a clear and healthy pool. Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly.

How long after shock Can you swim?

24 hours

After Shocking Your Pool



It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!

Is liquid chlorine better than shock?

Liquid chlorine is generally less costly than granular shock and comes in refillable containers, where granular shock does not. Liquid chlorine does not need to dissolve in your water as it is already in liquid form. In addition, liquid chlorine is non-scaling and leaves no residue.

How much chlorine do I put in a 10000 gallon pool?

about 52-104 oz

The most important factor though is the size of the pool. You’ll need about 52-104 oz of liquid chlorine per 10,000 gallons of water. This amount should get the chlorine level to between 5 and 10 ppm.

How long does chlorine last in a pool?

Most floating chlorinators can hold anywhere from two to eight weeks worth of chlorine, depending on conditions such as the season and your pool’s size. An automatic feeder works in a similar way, allowing it to mix with the pool water slowly and deliberately. This type generally comes in a large bucket.

How much liquid chlorine is equal to a bag of shock?

Often, it will look something like this. 12.5% Liquid Chlorine Pool Shock – Normal Dosage: 1 gallon of shock per 10,000 gallons of water. Shock Dosage: 2 gallons of shock per 10,000 gallons of water.

How much chlorine do I put in a 5000 gallon pool?

6 ounces

6 ounces initially per 5,000 gallons and a a maintenance dose of . 75 ounces per 3,000 gallons every week. Initially you will need stabilizer to protect the chlorine from the sun. This is added at a rate of one pound per 3,000 gallons of water.

Will liquid chlorine clear a green pool?

Will chlorine clear up a green pool? Yes! In fact, enough chlorine kills algae which causes green pool water. but it takes a large amount in the form of calcium hypochlorite super shock.