How much bleach do I put in my pool?

Asked by: James Heflin

Clorox itself recommends using between ounces of regular-strength bleach per 10,000 gallons of pool water — one gallon is 128 ounces, and many bottles of bleach are available in one-gallon or half-gallon sizes.

Can I use household bleach in my pool?

It is important to know what exactly bleach is before you put it in your pool. Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine.

What happens if I put too much bleach in the pool?

Excess chlorine can alter the pH level of the water in the pool, making it more acidic. The acid levels can cause any of the following symptoms: Irritant dermatitis which is a red skin rash characterized by raised itchy red bumps. Eye irritation and over-dilated blood vessels in the eyes.

How long after putting bleach in pool Can you swim?

Liquid chlorine — In general, it’s a good idea to wait at least four hours after putting liquid chlorine in the pool. The size of your pool and the amount of chlorine added does play a factor in this, too. Once your levels reach 5 ppm or lower, you’re ready to swim.

Can you put bleach in a vinyl pool?

High concentrations of chlorine (above 1.5 ppm) will attack the liner and bleach it, thus damaging it. Any level below this range will weaken its ability to kill off bacteria.

Will bleach clear a green pool?

Green algae, unlike its black counterpart, is a true algae; it isn’t resistant to chlorine, so you can control it by shocking the pool. If you don’t want to spend a lot of money on expensive pool chemicals, you can shock with household bleach.

Is pool chlorine the same as bleach?

Liquid chlorine



Household bleach (the same as you use for your laundry) and pool chlorine are the same thing. They are identical in every way, with the exception of strength.

How much chlorine do I put in a 10000 gallon pool?

The most important factor though is the size of the pool. You’ll need about 52-104 oz of liquid chlorine per 10,000 gallons of water. This amount should get the chlorine level to between 5 and 10 ppm.

Does adding bleach to pool raise pH?

Bleach is basically ph neutral. It will raise the ph slightly when added but as the chlorine get used up, it will drop back down. Some of the cheaper stuff, and the higher concentration stuff have more lye, which will raise ph a little…but again, in most cases, ph neutral (long term).

Can you put bleach in Intex pool?

Liquid chlorine, household bleach, and dichlor are the preferred choice of chlorine for an Intex swimming pool. These chlorines will minimize any potential damage to the pool liner, such as bleaching or weakening.

Can I use liquid bleach in my above ground pool?

The solution to maintaining a clear pool is to use readily available liquid bleach as your chlorine source. Chlorine bleach, as discussed above, is not bound to a stabilizer, so when you add chlorine bleach to the pool, it will go right to work killing microbes and sanitizing.

Is chlorine stronger than bleach?

Answer: It is true that pool chlorine is stronger than bleach. For bleach and water to be the same strength as pool chlorine and water, you would have to adjust the ratio, increasing the bleach and reducing the water. But no matter which chlorine you use, make sure to test a small area before doing the job.

Can I shock my pool with Clorox bleach?

Now you can know the gallons of bleach you would need to shock your pool as follows: use 0.5 gallons of Clorox per 10K gallons of water to increase the level of chlorine by 5 ppm. If you want to raise the level of chlorine by 2.5 ppm, then you would need ¼ gallon of the product per 10K gallons of water.

How do I add bleach to my pool?

So if I want to raise this three parts per million I would add a specific amount of the Clorox bleach to do. That. If you add liquid chlorine you want to pour it around the perimeter of your. Pool.