How many gallons of water is in a 10×30 pool?
3 min read
Asked by: Becky Montgomery
How many gallons of water is in a 10ft pool?
Specifications
| Item | 10ft Fast Set Pool |
|---|---|
| Weight | 8.6kg (19.0lb) |
| Water Capacity | 3,638L (608 gal) |
| Size | 10ft x 30″ |
| Included | 330 gallon filter pump (may only be included in some retailer packages) |
How many gallons of water are there in a 10 ft diameter circular tank with 3 inches of water?
Volume in US gallons and liters.
| Tank Diameter | Volume (U.S. Gallons per foot) | |
|---|---|---|
| Feet | Inch | |
| 3 | 9 | 82.62 |
| 10 | 86.33 | |
| 11 | 90.13 | |
How many gallons is my pool chart?
For example, if the pool is 16 1/2 feet wide, use 17 feet as the width. 2- Put the Diameter in the Length And Width fields for Circular pools.
How Many Gallons Of Water Are In My Swimming Pool?
| SIZE | GALLONS OF WATER |
|---|---|
| 12′ Round | 3,823 |
| 15′ Round | 5,973 |
| 18′ Round | 8,602 |
| 21′ Round | 11,708 |
How many gallons of water are in a 4 inch pipe?
Volume and Weight of Water for Common Pipe Sizes
| Pipe Size | Volume | |
|---|---|---|
| in | in3/ft | gallons/ft |
| 3″ | 84.823 in3 | 0.3672 gal |
| 4″ | 150.8 in3 | 0.6528 gal |
| 5″ | 235.62 in3 | 1.02 gal |
How many gallons are in a 10 foot Intex pool?
It comes with a 330 Krystal Clear™ cartridge filter pump. Water capacity is 1,185 gallons (90%) and it is ready for water in 30 minutes.
How do I keep my 10ft pool clean?
Step number two is to actually add chemicals to your pool and the most common pool chemical to use is actually chlorine chlorine normally comes in tablets.
How do I calculate gallons in a pipe?
The formula for the volume of cylinder is: cylinder volume = π * radius² * height . For a pipe use its length instead of height: pipe volume = π * radius² * length , where radius = inner diameter/2 . The volume of a pipe is equal to the volume of a liquid inside (if a pipe is fully filled with it).
How much does 1 gallon of water weigh?
The answer is simple; a gallon of water weighs about 8.3 pounds. The imperial gallon of water is defined as 10.02 pounds at its maximum density while the weight of US dry gallon of water is defined as 9.71 pounds. However, the answer comes with a caveat. The weight per gallon of water fluctuates with temperature.
How many gallons does a 1 inch pipe hold?
A 1-inch diameter hose has a capacity of 4 gallons.
How much water will a 6 inch pipe flow?
Water Flow Capacity in Steel Pipes (sch 40)
| Pipe Size | Maximum Flow (gal/min) | Head Loss (ft/100 ft) |
|---|---|---|
| 4″ | 260 | 4.0 |
| 6″ | 800 | 4.0 |
| 8″ | 1,600 | 3.8 |
| 10″ | 3,000 | 4.0 |
How much water fills a fire hose?
Each 1-1/2-inch ID x 100-foot hose length holds 9 gallons. Each 1-inch ID × 100-foot hose length holds 4 gallons. hose. The firefighters lost 130 gallons of water.
