How many gallons are in a 10×30 Intex pool?

Asked by: Brendan Walsh

It comes with a 330 Krystal Clear™ cartridge filter pump. Water capacity is 1,185 gallons (90%) and it is ready for water in 30 minutes.

How many gallons is an Intex Easy Set 10×30?

Pump flow rate: 330 gallons, System flow rate: 300 gallons.

How many gallons is a 10 Intex Easy Set pool?

Pool water capacity at 80% full: 848 gallons (3,853 litres). Size: Diameter 10 feet (305cm), Height 30 inches (76cm).



SKU.

How many gallons does a 10ft pool hold?

Specifications

How many Litres is an Intex 10×30 pool?

Intex 10′ X 30″ Metal Frame Pool Set



The pool is ready for water in 30 minutes and holds up to 4,485L.

How big is a 10ft by 30in pool?

10 ft diameter x 30″ (2.5 ft) height.

How long does it take to fill a 10ft by 30 inch pool?

between 3 and 4 hours

Easy to set up. Takes a while to fill between 3 and 4 hours.

Do I need to add chlorine to my Intex pool?

For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.

How do I keep my 10ft pool clean?

Step number two is to actually add chemicals to your pool and the most common pool chemical to use is actually chlorine chlorine normally comes in tablets.

How much liquid chlorine do I add to my pool?

The most important factor though is the size of the pool. You’ll need about 52-104 oz of liquid chlorine per 10,000 gallons of water. This amount should get the chlorine level to between 5 and 10 ppm.

How many gallons is my Intex pool?

Easy Set Intex Pool Gallons Chart

Is a 10ft pool big?

A 10ft wide inflatable pool is an ideal choice for most families. It’s big enough to have room for everyone, while it won’t be so large that is difficult to set up and maintain. This guide will include six 10ft inflatable pools that are sturdy, budget-friendly, and easy to use.

How wide is a 10 foot pool?

12-ft (snooker): 140″ (356.9 cm) x 70″ (177.8 cm) 10-ft (oversized): 112″ (284.5 cm) x 56″ (142.2 cm) 9-ft (standard regulation size table): 100″ (254 cm) x 50″ (127 cm) 8-ft+ (pro 8): 92″ (233.7 cm) x 46″ (116.8 cm)

What do you need for a 10 ft pool?

I said this is a 1,000 gallon pool the eight-foot insects pool I'm not sure how many gallons that is but it's still a lot of water to be you know dirty or the pH balance to be off and everything.

How do I set up my Intex 10ft pool?

Before unrolling the pool. Clear the area thoroughly of any object that would puncture the pool when it is in use. Ground cloths can provide additional protection.

How do you set up a 10ft Quick Set pool?

So you want to spread out the pool. So you want the center of the pool. To be in the center of where you have carved out space for your pool.

How many gallons is a summer waves 10ft pool?

1,052 gallons

Dimensions: 10 x 10 x 2.5 feet. Water capacity (80%): 1,052 gallons.

How long does it take to fill a Bestway 10ft pool?

Luckily, Bestway Fast Set Pools are easy to set up, and depending on the size you choose, will take 10-15 minutes to fill with water. Simply inflate the ring around the top of the pool, and then let it rise upwards as you fill the base with water from a hose.

How do you shock a pool?

So let's pour the shock inside the pool. So that's it all you want to do is you want to pre-dissolve each bag in a bucket of water that means water first then put in the shock mix it up with a stick.

How soon after shocking pool can I swim?

24 hours

After Shocking Your Pool



It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!

What happens if you swim in a shocked pool?

What Happens If You Swim In A Shocked Pool? If you do not wait for the chemicals used to shock a pool to totally dissolve then you could be placing yourself in serious danger by swimming in it. At the minimum, you will feel itchy skin and eyes because of the chemicals present in the water.

Can I use bleach to shock my pool?

Calculate the amount of bleach you need based on the fact that 1 gallon will raise the free chlorine level of 30,000 gallons of water by 2 ppm. If you need to mildly shock a 30,000-gallon pool by raising the free chlorine concentration to 5 ppm, you need 2.5 gallons of bleach. To raise it to 10 ppm, you need 5 gallons.

Will baking soda make my pool water clear?

Will baking soda clear up a cloudy pool? The answer to this question is absolutely, yes! If the cloudy pool water problem is being caused by the water in your swimming pool having a lower than recommended pH and Alkalinity.

Can I use regular Clorox for my pool?

Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine. Household bleaches often have unwanted fragrances and colors.

Is Clorox bleach the same as pool chlorine?

In truth, bleach contains the same base chemical as pool chlorine. That chemical is, of course, chlorine, and the only major difference between the two products is the concentration strength. Pool chlorine typically contains some form of stabilizer, as well, though this is not a crucial factor.

What does baking soda do to pool water?

Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity. Many commercial pool products for raising alkalinity utilize baking soda as their main active ingredient.

How often should I put bleach in my pool?

Once you’ve obtained a good reading, you can usually maintain your chlorine levels by adding chlorine tablets once a week. These dissolve more slowly and will keep your chlorine levels stable.