How long would a worn cassette take to wear out a new chain?

Asked by: Kim Hernandez

If you change your chain every 1500 miles, you can expect a cassette to last around three chains which will be 4500. If you don’t change your chain, you may only see 3000 miles out of a cassette.

Will a worn cassette damage chain?

If the chain was very worn, and you put a new chain onto an old cassette, at best it will wear the new chain faster than it should. At worst it will not engage properly and can skip or you may get poor shifting or even break the new chain.

How long should a chain and cassette last?

A properly maintained MTB chain will last more than 2000 miles while a poorly maintained chain can last less than 1000 miles. Chains for 11+ speed cassettes tend to have a shorter lifespan than chains for 10 and < 10-speed cassettes because they need to be changed after less wear.

Should you replace your cassette when you replace your chain?

You certainly don’t need to change the cassette and chainrings every time you swap the chain, though, it’s just that you should check out the health and performance of these other drivetrain components as soon as you’ve installed a new one.

How do you tell if your cassette is worn out?

Quote from video: Now one of the most obvious indicators of a worn out cassette is when the gears are skipping when you've just replaced your chain.

How long should a chain last?

2,000 to 3,000 miles

Replacing your chain regularly can prolong the life of your drivetrain. Most mechanics agree that you should replace your chain about every 2,000 to 3,000 miles, depending on your riding style. Many Tour De France riders wear out two or even three chains on their primary bike over the course of the three-week race.

How often should you change your cassette?

My rule of thumb is to replace it at 75 per cent wear (as measured with a chain-wear indicator). If you stick with this guideline, your cassette and chainrings will last a lot longer. A cassette, in most cases, can last for approximately two to three chain replacements if they are done at the right time.

How do I know if my bike chain needs replacing?

Chain wear indicator



You hook the curved end into the chain and if the gauge tip on the other end fits completely into a chain link, the chain is worn to the point it needs replacing (one side measures 0.5% wear, the other side measures 0.75% wear).

How do I know if my chain is worn without the tool?

Quote from video: If you find yourself without the proper tool do. This the teeth holds the chain in place. And this gap exposes chain where the bigger gap means more chain wear and a smaller gap is less pain wear.

When should I change my bike chain?

The number most commonly agreed on for a worn chain is one percent elongation between links. In reality though, you want to replace the chain before this point. So therefore anything past 12, 1/16 inches (0.5 percent) would be the time to replace a chain.

How long do Chainsets last?

Chains can last and last and last. I had one still in use at 7,500miles, but I looked after it to get it that far. Most folk seem to discard chains at about the 2,000 to 3,000miles mark. Perhaps your chain cleaning regime isn’t too good, as chainsets can seemingly last forever.

How long does a music cassette last?

30 years

That’s right, the cassette tapes of your youth have been slowly degrading over the last several decades and there’s nothing you can do to stop it – only prolong it. Because whether you like it or not, 30 years is the average life of a cassette tape.

How long do bike gears last?

Expect between 1,500 and 3,000 miles from a 10-speed chain.

Which bike chains last the longest?

“SRAM claim the world’s longest-lasting chain with their XX1, and they are not kidding,” Kerin said. “Both the X01 and XX1 chains were so far ahead of any other chain from a pure elongation wear measure that I had to re-run the tests. The results were basically identical. Their longevity is phenomenal.”

Why is my bike chain jumping?

Gear indexing issues



One of the most common reasons for a skipping chain is simply a drivetrain that needs a simple indexing adjustment. This is so common that even many brand new bikes can exhibit these symptoms. The good news is that this is probably the simplest to diagnose and fix of all potential issues.

How often should you change your chain and sprocket?

Quote from video: Похожие запросы

Does a worn chain affect shifting?

Chain wear will lead to poor shifting and lost efficiency. Additionally, a severely worn chain is weaker and there’s nothing fun about a snapped chain under power.

Can I ride on a worn chain?

On a used chain there will be some stretch. If this is less than 1/16″ (1.6mm) the chain is still fine to use, keep riding but keep checking frequently. If the chain growth is greater than 1/16″ (1.6mm) it is probably time to think about replacing.

How long should a bicycle chain last?

The Lifespan of a Bicycle Chain



Generally speaking, with good maintenance, you should only need to replace your chain every 2000-3000 miles. But some riders may find that their riding style causes them to need to change to a new chain every 500 miles.

When should I replace my MTB cassette?

Quote from video: It will force and wear away the first indicator is when you've checked your chain if your chain is 75% to 100% worn. Then you're fairly certain there is going to be signs of wear on your cassette.

How many miles should a MTB chain last?

There are many variables that affect how long a chain will last. It could last several months, or it could last much longer. A typical mountain bike chain will last 750 miles of single track riding. It’s not easy to gauge exactly how long a chain will last, but there are ways to prolong the life of the chain.

What does a worn bike cassette look like?

Quote from video: Become greater and the roller is no longer sit down at the bottom of the groove but tend to roll up onto the top of the teeth wearing the teeth and deforming the tee.